AMPP Store - Oil and Gas

Available for download

AMPP TM21453-2023, Laboratory Testing for Resistance to Environmentally-Assisted Hydrogen Stress Cracking in Welds

Product Number: AMPP TM21453-2023

Publication Date: 2023

$109.00

This standard covers the testing of welds subjected to tensile stresses for resistance to cracking in aqueous environments containing a source of hydrogen charging. Carbon and low alloy steels and their matching welds are commonly tested for EAC resistance at room temperature where susceptibility is typically high. For other types of alloys, the correlation of EAC susceptibility with temperature is more complicated. For example, dissimilar welds of nickel alloy on carbon or low alloy steel have shown susceptibility at low, seabed temperatures (4 °C [39 °F]). Matching welds made on duplex stainless steels have shown similar susceptibility (DNV RP-F112).

Available for download

AMPP TM21465-2024, Molecular Microbiological Methods - Sample Handling and Laboratory Processing

Product Number: AMPP TM21465-2024

Publication Date: 2024

$109.00

This standard is applicable to operators, service companies, third-party laboratories, consultants, and universities that perform molecular techniques to identify microorganisms in industrial settings, including microorganisms involved in microbiologically influenced corrosion (MIC), biogenic production of hydrogen sulfide (a process also known as souring), and biofouling in industrial settings and organizations that manage assets affected by corrosion threats. This standard should be used to select appropriate procedures for sample collection, preservation, laboratory processing, and data analysis.

Available for download

AMPP TM21510-2022, Potentiodynamic Scans: Material Preparation, Data Acquisition and Analysis

Product Number: AMPP TM21510-2022

Publication Date: 2022

$109.00

This standard provides a method for collecting reproducible potentiodynamic data, enabling the comparison of data across various experiments and laboratories. This method is intended for those with experience in potentiodynamic data collection across all of industry and academia. This method has been adapted from Appendix B of MIL-STD-889. Users interested in submitting data for acceptance into MIL-STD-889 shall refer to the latest version of MIL-STD-889

Available for download

AMPP TM21549-2024, Test Method for Assessing the Impact of an Insulation Material on Corrosion Under Insulation

Product Number: AMPP TM21549-2024

Publication Date: 2024

$109.00

This AMPP standard test method provides a comprehensive methodology to evaluate the relative performance of insulation materials in accelerated and simulated field conditions on bare metal substrates. This test method is intended for use by corrosion control personnel, design engineers, project managers, purchasing personnel, and construction engineers and managers. It is applicable to insulated piping and equipment in industrial applications such as oil and gas gathering, distribution, transmission and refining, power generation, mining, and chemical industries.

Available for download

AMPP TR21478-2023, 3D Optical Imaging Techniques

Product Number: AMPP TR21478-2023

Publication Date: 2023

$109.00

3D corrosion measurement techniques described in this report can be performed in the field, laboratory, plant environment, or other related facilities. Corrosion measurements are obtained under widely varying field conditions and plant environments. This report provides the user with the background needed to make testing decisions in the field or laboratory based on the technical facts available at the time of publication.

This technical report provides descriptions of the corrosion pitting measurement techniques used on underground and aboveground piping, tanks, and vessels using 3D optical imaging tools. This report includes those corrosion measurement techniques that relate to the ASME B31.8, API 579, or special conditions in NACE SP0502

Available for download

AMPP TR21522-2024, Corrosion Testing for Additive Manufacturing

Product Number: AMPP TR21522-2024

Publication Date: 2024

$109.00

This technical report presents the current state of knowledge and gap analyses on corrosion testing of metallic materials produced using additive manufacturing (AM) technologies in environments relevant to several industrial applications. The discussed materials were produced primarily via laser powder bed fusion (LPBF), directed energy deposition (DED), and specifically the wire arc additive manufacturing (WAAM) form of DED. Many variables may not be sufficiently detailed in the rapidly evolving state of the art at the time of publication for the assessment of the performance of AM products; some variables such as microstructure, post-build processing, surface condition, residual stress, physical defects, and selection of representative test specimens (size and/or geometry) for a finished product are addressed. This report contains approaches for corrosion and environmental cracking assessment of AM materials, including test details that are relevant to the AM processes for some specific cases. The technical report provides the foundation for the preparation of test standard(s) that apply to AM products.

Available for download

AMPP TR21524-2023, Commentary on Standards Development for Selection and Qualification of HSC-Resistant Materials in Subsea Service with Cathodic Protection

Product Number: AMPP TR21524-2023

Publication Date: 2023

$109.00

As a companion document to MR21525, this Technical Report provides results, review and commentary on many investigations of HSC and includes important literature data, references, background information, service experience and related standards that were utilized in the development of the AMPP MR21525. Most of the information in this Technical Report covers findings from HSC field experience and HSC data from brine/CP exposure tests or from other cathodic charging experiments. It is important to note, in the use of MR21525 and in the review of data contained herein, that HSC can also be induced from hydrogenating environments and conditions other than from just from CP exposure alone. A non-exhaustive list of such conditions is presented later in this Technical Report.

Available for download

An Introduction to Asset Corrosion Management in the Oil and Gas Industry, 2nd edition (e-book)

Product Number: 37619-E

ISBN: 978-1-57590-338-5

Author: Ali Morshed

Publication Date: 2016

$130.00

For integrity engineers/managers, students, etc. Asset corrosion management discipline & its applications. Process. Products. Shortcomings. Cost savings. Real-case scenarios of oil and gas assets. 2016 NACE E-BOOK

Available for download

An Update and Review of Offshore Systems and Current Testing Scenarios

Product Number: 41206-266-SG

Author: Mike Mitchell

Publication Date: 2006

$20.00

Offshore coating systems have evolved over the past 50 years to allow for restrictions in raw material use and solvent emissions. This has meant that many tried and tested systems can no longer be used. This paper describes the industry in terms of attempts to generate suitable prequalification testing scenarios which will prevent premature failures of untried new systems

ANSI/NACE MR0175/ISO 15156 Inquiries and Answers, Petroleum and natural gas industries—Materials for use in H2S-containing environments in oil and gas production—Inquiries and Answers

Product Number: 21312-SG

ISBN: MR0175/ISO 15156

Publication Date: 2015

$420.00

Selection and qualification of carbon and low-alloy steels, corrosion-resistant alloys, and other alloys in oil and natural gas production and treatment plants with H2S-environments. With inquiries and responses embedded in the standard. Sold as a downloadable only.

ANSI/NACE MR0175/ISO 15156-2015

Product Number: 21307-SG

ISBN: MR0175/ISO15156

Publication Date: 2015

$255.00

HISTORICAL DOWNLOADABLE 2015 EDITION.

Selection and qualification of carbon and low-alloy steels, corrosion-resistant alloys, and other alloys for service in equipment in oil and natural gas production and NG treatment plants in H2S-containing

ANSI/NACE MR0175-2021/ISO 15156:2020

Product Number: ANSI-NACE MR0175-2021

Publication Date: 2021

$495.00

Note: This document was originally published with errors in Table A.16, page 3-32. These identified errors are corrected. Errata sheet is included.

NACE MR0175/ISO 15156 gives requirements and recommendations for the selection and qualification of carbon and low-alloy steels, corrosion-resistant alloys, and other alloys for service in equipment used in oil and natural gas production and natural gas treatment plants in H2S-containing environments, whose failure could pose a risk to the health and safety of the public and personnel or to the equipment itself.

Oil and Gas

Association for Materials Protection and Performance