Server maintenance is scheduled for Saturday, December 21st between 6am-10am CST.

During that time, parts of our website will be affected until maintenance is completed. Thank you for your patience.

Menu
Search
Filters
Close
Menu

New Developments in Surface Profile Measurement for Blast Cleaned Surfaces

New Developments in Surface Profile Measurement for Blast Cleaned Surfaces
Available for download

When protective coatings are to be applied to structures, it is important that the surface is clean and dry if premature failure of the coating is to be prevented and the full coating service life achieved. In many situations for both new build and repair of structures, blast cleaning of the surface is required to remove contamination and to create an anchor pattern to enhance the adhesion of the coating system to the substrate. 

Product Number: 41213-746-SG
Author: J F Fletcher
Publication Date: 2013
Industries: Test Method , Coatings
$0.00
$20.00
$20.00

When protective coatings are to be applied to structures, it is important that the surface is clean and dry if premature failure of the coating is to be prevented and the full coating service life achieved. In many situations for both new build and repair of structures, blast cleaning of the surface is required to remove contamination and to create an anchor pattern to enhance the adhesion of the coating system to the substrate. The measurement of the profile is important in achieving the specification but also to ensure that the blast cleaning process is in control and not producing inadequate or excessive profile height. There are two ASTM standards that deal with surface profile assessment, D 4417, Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel, and D 7127, Standard Test Method for Measurement of Surface Roughness of Abrasive Blast Cleaned Metal Surfaces Using a Portable Stylus Instrument. D 4417 describes three methods for either assessing the profiled surface, Method A the surface comparator, or measuring the profile height, Method B, the Depth Gauge and Method C, Replica Tape. D 7127 describes the stylus measurement technique giving results for both profile height and peak density. This paper describes the equipment that is currently available for these test methods and discusses the differences in both the methods and the resulting measurements including the calibration of the surface comparators. The significance of these differences will be analyzed in the context of typical grit and shot blasted surfaces

When protective coatings are to be applied to structures, it is important that the surface is clean and dry if premature failure of the coating is to be prevented and the full coating service life achieved. In many situations for both new build and repair of structures, blast cleaning of the surface is required to remove contamination and to create an anchor pattern to enhance the adhesion of the coating system to the substrate. The measurement of the profile is important in achieving the specification but also to ensure that the blast cleaning process is in control and not producing inadequate or excessive profile height. There are two ASTM standards that deal with surface profile assessment, D 4417, Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel, and D 7127, Standard Test Method for Measurement of Surface Roughness of Abrasive Blast Cleaned Metal Surfaces Using a Portable Stylus Instrument. D 4417 describes three methods for either assessing the profiled surface, Method A the surface comparator, or measuring the profile height, Method B, the Depth Gauge and Method C, Replica Tape. D 7127 describes the stylus measurement technique giving results for both profile height and peak density. This paper describes the equipment that is currently available for these test methods and discusses the differences in both the methods and the resulting measurements including the calibration of the surface comparators. The significance of these differences will be analyzed in the context of typical grit and shot blasted surfaces

Product tags
Also Purchased
Replica Tape- Relating 3 Surface Profile Parameters to Pull-Off Adhesion
Available for download

Replica Tape- Relating 3 Surface Profile Parameters to Pull-Off Adhesion

Product Number: 41215-878-SG
Author: David Beamish
Publication Date: 2015
$20.00

Steel surfaces are frequently cleaned by abrasive impact prior to the application of protective coatings. The resultant surface profile must be accurately assessed to ensure compliance with job or contract specifications. But is profile height alone (the most commonly measured parameter) a good indicator of long-term coating performance? 
Pull-Off Adhesion Testing of Coatings - Improve Your Technique
Available for download

Pull-Off Adhesion Testing of Coatings - Improve Your Technique

Product Number: 41215-893-SG
Author: JF Fletcher, DJ Barnes
Publication Date: 2015
$20.00

Pull-off adhesion testing is widely used to assess the protective coating process. It is also used to determine if a coating is fit for service in new construction and for repairs to existing structures. The result is often critical to the acceptance or rejection of a coating process, as the adhesion value quoted by the paint manufacturer can be adversely affected by aspects of the coating process. Low adhesion values are indicative of premature failure of the coating and are often due to inadequate surface preparation of the substrate. 
Paint Inspection From the Coating Manufacturer’s Perspective
Available for download

Paint Inspection From the Coating Manufacturer’s Perspective

Product Number: 41215-894-SG
Author: Troy Fraebel, Bruce Snyder
Publication Date: 2015
$20.00

Quality Assurance/Quality Control (QA/QC), often referred to as inspection, is critical to the success of a protective coating or lining project. Several parties can and do get involved in inspection including the owner, specifier, third party inspector, general contractor, painting contractor, equipment supplier, and coating manufacturer. 
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support