Server maintenance is scheduled for Saturday, December 21st between 6am-10am CST.

During that time, parts of our website will be affected until maintenance is completed. Thank you for your patience.

Menu
Search
Filters
Close
Menu

Use GIVING24 at checkout to save 20% on eCourses and books (some exclusions apply)!

51318-11559-New Design/Material Solution for Pipeline Chemicals and Permeation

Picture for New Design/Material Solution for Pipeline Chemicals and Permeation
Available for download

Results of both laboratory testing and field evaluation will display the performance weaknesses of glass reinforced epoxy (GRE) gaskets.  A newly developed technological solution for pipelines requiring isolation will be presented.

Product Number: 51318-11559-SG
Industry: Gas/Liquid Pipelines
$0.00
$20.00
$20.00

Glass reinforced epoxy (GRE) gaskets were a significant improvement over prior isolation technologies, such as phenolic gaskets, which were in use since the early 1900’s. GRE has now been used to isolate pipelines in a broad range of industries for close to 50 years. Advances in oil and gas extraction, changes in oil chemistry and changes in installation practices have exposed some potential weaknesses in common gaskets utilizing GRE as the primary form of isolation. The typical GRE gasket uses media permeating through the gasket to energize the seal. This “leak to seal” design is an indicator that GRE may not be the best choice as a gasketing material as media stream materials have become increasingly incompatible with the epoxy resin. Due to the continued efforts to design GRE gaskets with reduced permeation paths, it is believed that GRE’s permeability is a well known issue, but GRE has other weaknesses that open this product up to potential failure in a pipeline. The GRE can be prone to delamination at high pressures due to the material’s laminate construction, the operating temperature range of GRE is not as high as many oil and gas operators would desire and finally, the thickness and thickness tolerance of GRE can cause installation challenges and potential failure by media leakage.

This paper will graphically and technically display these performance weaknesses with output from both laboratory testing and field evaluation. An in-depth review of failure modes and causation will be executed on a mode-by-mode basis. A solution will be presented with data and imagery defining a newly developed technological solution for pipelines requiring isolation.

 

Key words: Isolation gasket, insulating gasket, GRE, glass reinforced epoxy, electrical isolation, permeation, blowout, delamination, pressure, temperature, Tg, hydrotest, resistance, chemical attack, steam, H2S, CO2, CO, NEMA,G10, G11, sour gas, API, ASME, volt, helium, nitrogen, coating, coated, encapsulated.

Glass reinforced epoxy (GRE) gaskets were a significant improvement over prior isolation technologies, such as phenolic gaskets, which were in use since the early 1900’s. GRE has now been used to isolate pipelines in a broad range of industries for close to 50 years. Advances in oil and gas extraction, changes in oil chemistry and changes in installation practices have exposed some potential weaknesses in common gaskets utilizing GRE as the primary form of isolation. The typical GRE gasket uses media permeating through the gasket to energize the seal. This “leak to seal” design is an indicator that GRE may not be the best choice as a gasketing material as media stream materials have become increasingly incompatible with the epoxy resin. Due to the continued efforts to design GRE gaskets with reduced permeation paths, it is believed that GRE’s permeability is a well known issue, but GRE has other weaknesses that open this product up to potential failure in a pipeline. The GRE can be prone to delamination at high pressures due to the material’s laminate construction, the operating temperature range of GRE is not as high as many oil and gas operators would desire and finally, the thickness and thickness tolerance of GRE can cause installation challenges and potential failure by media leakage.

This paper will graphically and technically display these performance weaknesses with output from both laboratory testing and field evaluation. An in-depth review of failure modes and causation will be executed on a mode-by-mode basis. A solution will be presented with data and imagery defining a newly developed technological solution for pipelines requiring isolation.

 

Key words: Isolation gasket, insulating gasket, GRE, glass reinforced epoxy, electrical isolation, permeation, blowout, delamination, pressure, temperature, Tg, hydrotest, resistance, chemical attack, steam, H2S, CO2, CO, NEMA,G10, G11, sour gas, API, ASME, volt, helium, nitrogen, coating, coated, encapsulated.

Product tags
Also Purchased
Picture for High Concentration Biocide Treatment of an Oil Pipeline
Available for download

51318-11616-High Concentration Biocide Treatment of an Oil Pipeline

Product Number: 51318-11616-SG
Author: Zach Broussard / Timothy J Tidwell / Renato De Paula / Victor Keasler
Publication Date: 2018
$20.00

An oil transmission pipeline in the Eagle Ford area was being treated with 150ppm of active biocide based on a five percent water hold up but good control of the microbial population was not being maintained.

 
Picture for NACE MR0175/ISO 15156: Update on current document and where are we going?
Available for download

51318-11294-NACE MR0175/ISO 15156: Update on current document and where are we going?

Product Number: 51318-11294-SG
Author: Robert P. Badrak
Publication Date: 2018
$20.00

This standard is now undergoing a critical review to determine how it should change to meet the future needs of the Oil & Gas Industry better. Where are we headed with NACE MR0175/ISO 15156? The results of our collective initial efforts are presented.
Picture for Failure Analysis of Gas Separator Cooler Tube Leak during service after passing Inspection test duri
Available for download

51318-11557-Failure Analysis of Gas Separator Cooler Tube Leak during service after passing Inspection test duri

Product Number: 51318-11557-SG
Author: Mohamud M. Farah / Muazu Mohammed
Publication Date: 2018
$20.00

Investigation revealed an erroneous selection of Incoloy 800 material for the gas separator tube instead of Inconel 625 and Incoloy 825 which have shown excellent pitting corrosion resistance.
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support