Addition of controlled quantity of iron (II) chloride (FeCl2) in a test solution allows a tight control of the pH of Sulfide Stress Cracking (SSC) tests for low alloy steels. The natural buffering capacity is a consequence of the precipitation of iron sulfide corrosion products at a very early stage during the corrosion test. This work shows that FeCl2 can efficiently replace acetic acid for pH buffering of the SSC tests. NACE TM0177 Method A and D tests have been performed and showed similar environmental severity for SSC compared to standardized test solutions at a given pH. Thanks to a reduction of the corrosion rate in FeCl2 containing environments, which limits the increase of the applied stress during the test, the environmental severity appears to be fairly evaluated. Iron sulfide scale characterization and failure observations support the conclusion that FeCl2 containing solutions do not modify the SSC corrosion mechanism. This alternative test solution is well adapted to the determination of threshold pH for SSC.