Search
Filters
Close

51318-10815-Mechanism of failure of IN657 high temperature tube support pipes after 10 years of service

Microstructural analysis of failed support pipes made of cast UNS R20501 alloy in a reboiling heater unit was performed to understand its physical metallurgy and the origin of the pipe failures.

Product Number: 51318-10815-SG
Author: Ihho Park / Raghavan Ayer / Yunjo Ro / Seokwon Kim / Jae-Woong Kim
Publication Date: 2018
$0.00
$20.00
$20.00

Microstructural analysis of failed support pipes made of cast UNS R20501 alloy in a reboiling heater unit was performed to understand its physical metallurgy and the origin of the pipe failures. By design, these support pipes are exposed to a temperature gradient from near ambient (furnace wall) to about 800°C (furnace temperature). It was found that all the failures had occurred at locations where the pipes were exposed to around 470-550°C. Analysis of different regions of failed pipes indicated that the failure was associated with a high degree of local hardening causing poor ductility. Detailed microstructural studies revealed the hardening and low ductility was caused by the precipitation of ultrafine α-Cr precipitates during service. In addition, the austenite phase had also undergone an ordering reaction resulting in the formation of Ni2Cr domains. It was concluded that the combination of α-Cr precipitation and Ni2Cr ordering resulting in local hardening caused the failure of the pipes. The results of the analysis suggest that this alloy may not be suitable for service in the range of 470 ~ 560°C in the as-cast condition.

Key words: UNS R20501, 50Cr-50Ni-Nb, support, α-Cr precipitation, Ni2Cr, ordered domains, hardening

Microstructural analysis of failed support pipes made of cast UNS R20501 alloy in a reboiling heater unit was performed to understand its physical metallurgy and the origin of the pipe failures. By design, these support pipes are exposed to a temperature gradient from near ambient (furnace wall) to about 800°C (furnace temperature). It was found that all the failures had occurred at locations where the pipes were exposed to around 470-550°C. Analysis of different regions of failed pipes indicated that the failure was associated with a high degree of local hardening causing poor ductility. Detailed microstructural studies revealed the hardening and low ductility was caused by the precipitation of ultrafine α-Cr precipitates during service. In addition, the austenite phase had also undergone an ordering reaction resulting in the formation of Ni2Cr domains. It was concluded that the combination of α-Cr precipitation and Ni2Cr ordering resulting in local hardening caused the failure of the pipes. The results of the analysis suggest that this alloy may not be suitable for service in the range of 470 ~ 560°C in the as-cast condition.

Key words: UNS R20501, 50Cr-50Ni-Nb, support, α-Cr precipitation, Ni2Cr, ordered domains, hardening

Also Purchased
Picture for Corrosion Inhibition of Stainless Steel in 0.5 M HCl by C6H5NH2
Available for download

51318-10807-Corrosion Inhibition of Stainless Steel in 0.5 M HCl by C6H5NH2

Product Number: 51318-10807-SG
Author: Olugbenga Adeshola OMOTOSHO / Joshua Olusegun OKENIYI / Abimbola Patricia POPOOLA
Publication Date: 2018
$20.00