Server maintenance is scheduled for Saturday, December 21st between 6am-10am CST.

During that time, parts of our website will be affected until maintenance is completed. Thank you for your patience.

Menu
Search
Filters
Close
Menu

Use GIVING24 at checkout to save 20% on eCourses and books (some exclusions apply)!

51314-4415-Laboratory Testing for SSC Resistance of Sour Service Material Relevant to HPHT Conditions

Picture for Laboratory Testing for SSC Resistance of Sour Service Material Relevant to HPHT Conditions
Available for download
Product Number: 51314-4415-SG
ISBN: 4415 2014 CP
Author: Avidipto Biswas
Publication Date: 2014
$0.00
$20.00
$20.00
For decades materials evaluation selection and specification for sour service conditions has been based on the principal of partial pressure H2S. In certain cases it is used in combination with insitu pH and chloride concentration to define conditions for laboratory testing with the aim of being representative of actual service conditions. However more recently powerful ionic models have been developed that allow accurate simulation of production conditions up to high pressure/high temperature conditions that in some cases are in excess of 20000 psi and 500 F. The results of such simulations indicate that partial pressure is likely not a correct or scalable parameter especially when comparing low and high pressure environments at constant H2S partial pressure and where salt concentrations vary from <1000 ppm to in excess of 180000 mg/L chlorides. This paper reviews the results of several studies in which conventional and sophistocated modeling techniques were used to specify loading conditions for sour service testing. It discusses the short comings of certain techniques and highlights requirements and new parameters for specification of laboratory test environments that correctly simulate conditions intended for sour service HPHT well environments.
For decades materials evaluation selection and specification for sour service conditions has been based on the principal of partial pressure H2S. In certain cases it is used in combination with insitu pH and chloride concentration to define conditions for laboratory testing with the aim of being representative of actual service conditions. However more recently powerful ionic models have been developed that allow accurate simulation of production conditions up to high pressure/high temperature conditions that in some cases are in excess of 20000 psi and 500 F. The results of such simulations indicate that partial pressure is likely not a correct or scalable parameter especially when comparing low and high pressure environments at constant H2S partial pressure and where salt concentrations vary from <1000 ppm to in excess of 180000 mg/L chlorides. This paper reviews the results of several studies in which conventional and sophistocated modeling techniques were used to specify loading conditions for sour service testing. It discusses the short comings of certain techniques and highlights requirements and new parameters for specification of laboratory test environments that correctly simulate conditions intended for sour service HPHT well environments.
Product tags
Also Purchased
Picture for Selecting Representative Laboratory Test Conditions for Mildly Sour Sulfide Stress Corrosion (SSC) T
Available for download

Selecting Representative Laboratory Test Conditions for Mildly Sour Sulfide Stress Corrosion (SSC) Testing

Product Number: 51314-4243-SG
ISBN: 4243 2014 CP
Author: Amit Kumar
Publication Date: 2014
$0.00
Picture for High strength steel SSC evaluation in mild sour environments at ambient and high temperatures
Available for download

51318-10920-High strength steel SSC evaluation in mild sour environments at ambient and high temperatures

Product Number: 51318-10920-SG
Author: James Wei / Manuel Gonzalez / Brian Chambers / Boris Thomas
Publication Date: 2018
$20.00

There is an increasing need to define the operating envelope for materials typically used as oil country tubular goods. This paper reports results of sulfide stress cracking (SSC) tests that were performed in mild sour environment at temperatures below 107°C.
Picture for Validation of the activity coefficients for carbonates at various HPHT and TDS conditions
Available for download

51314-4360-Validation of the activity coefficients for carbonates at various HPHT and TDS conditions

Product Number: 51314-4360-SG
ISBN: 4360 2014 CP
Author: Paula Guraieb
Publication Date: 2014
$20.00
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support