Server maintenance is scheduled for Saturday, December 21st between 6am-10am CST.

During that time, parts of our website will be affected until maintenance is completed. Thank you for your patience.

Menu
Search
Filters
Close
Menu

High Accuracy Ultrasonic Corrosion Monitoring

Picture for High Accuracy Ultrasonic Corrosion Monitoring
Available for download

Permanently installed transducers have improved the precision of ultrasonic inspection by orders of magnitude and provide an accurate non-invasive alternative to other corrosion monitoring methods.

Product Number: 51317--8990-SG
ISBN: 8990 2017 CP
Author: Fangxin Zou
Publication Date: 2017
Industry: Corrosion Monitoring and Control
$0.00
$20.00
$20.00

There exist many well-establishedtechniques for corrosion monitoring. These include but are not limited to weight measurements linear polarisation resistance (LPR) measurements and tactile measurements. However all of these approaches are not easy to apply to fluid conduits in the field since they require access to the interiors of components. Also weight measurements and LPR measurements are only capable of determining mass loss rates. The corresponding calculation of wall thickness losses requires integration and the assumption of several parameters such as the area over which the measurement is taking place. Ultrasonic measurements which can be carried out from the exteriors of components are much more field-deployable. It has been demonstrated that by using permanently installed transducers a precision in the order of micro-meters in wall thickness measurements can be achieved. This means that for corrosion rates of the order of 0.1 mm/year a change in wall thickness will only be detectable over the period of a few days. Much shorter response times could allow corrosion mitigation strategies to be implemented more effectively and are therefore desirable. In this paper an optimised ultrasonic setup for wall thickness monitoring will be introduced. Careful maximisation of the signal-to-noise ratio and accurate temperature compensation have allowed us to demonstrate that a repeatability of 40 nm in wall thickness measurements is achievable. This drastically shortens the response times of ultrasonic measurements and enables the detection of corrosion rates of the order of 0.1 mm/year in hours rather than days. The ultrasonic measurements presented in this paper have been verified by the results of optical surface metrology and where possible by predictions based on Faraday’s Law.

Key words: non-destructive evaluation, structural health monitoring, ultrasonic, corrosion

There exist many well-establishedtechniques for corrosion monitoring. These include but are not limited to weight measurements linear polarisation resistance (LPR) measurements and tactile measurements. However all of these approaches are not easy to apply to fluid conduits in the field since they require access to the interiors of components. Also weight measurements and LPR measurements are only capable of determining mass loss rates. The corresponding calculation of wall thickness losses requires integration and the assumption of several parameters such as the area over which the measurement is taking place. Ultrasonic measurements which can be carried out from the exteriors of components are much more field-deployable. It has been demonstrated that by using permanently installed transducers a precision in the order of micro-meters in wall thickness measurements can be achieved. This means that for corrosion rates of the order of 0.1 mm/year a change in wall thickness will only be detectable over the period of a few days. Much shorter response times could allow corrosion mitigation strategies to be implemented more effectively and are therefore desirable. In this paper an optimised ultrasonic setup for wall thickness monitoring will be introduced. Careful maximisation of the signal-to-noise ratio and accurate temperature compensation have allowed us to demonstrate that a repeatability of 40 nm in wall thickness measurements is achievable. This drastically shortens the response times of ultrasonic measurements and enables the detection of corrosion rates of the order of 0.1 mm/year in hours rather than days. The ultrasonic measurements presented in this paper have been verified by the results of optical surface metrology and where possible by predictions based on Faraday’s Law.

Key words: non-destructive evaluation, structural health monitoring, ultrasonic, corrosion

Product tags
Also Purchased
Picture for Online Continuous Corrosion Monitoring for Detection Monitoring and Control of Localized Corrosion
Available for download

Online Continuous Corrosion Monitoring for Detection Monitoring and Control of Localized Corrosion

Product Number: 51317--9065-SG
ISBN: 9065 2017 CP
Author: Jake Davies
Publication Date: 2017
$20.00

The authors will demonstrate that deploying only a modest number of point measurement devices in an area of elevated localized corrosion risk will provide the best possible combination of probability of detection (POD) as well as ongoing wall thickness monitoring for localized corrosion attack.
Picture for A New Perspective on Corrosion Monitoring
Available for download

51318-10937-A New Perspective on Corrosion Monitoring

Product Number: 51318-10937-SG
Author: Kjell Wold / Heitor Ruschmann / Ivan Ruiz Stubelj
Publication Date: 2018
$20.00

Corrosion monitoring technology selection should be based on the  challenges and information needs in each individual case. A combination of monitoring technologies will often provide the most reliable information, leading to improved decisions and better corrosion management.

 
Picture for Non-Intrusive Ultrasonic Corrosion-Rate Measurement in Lieu of Manual and Intrusive Methods
Available for download

Non-Intrusive Ultrasonic Corrosion-Rate Measurement in Lieu of Manual and Intrusive Methods

Product Number: 51317--8926-SG
ISBN: 8926 2017 CP
Author: Steve Strachan
Publication Date: 2017
$20.00

Technologically advanced, fully-digital ultrasonic wall-thickness measurement systems coupled with Internet of Things (IoT) back-haul data communication schemes, including cellular, are enabling transportable,accurate and cost-effective corrosion-monitoring systems.
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support