Server maintenance is scheduled for Saturday, December 21st between 6am-10am CST.

During that time, parts of our website will be affected until maintenance is completed. Thank you for your patience.

Menu
Search
Filters
Close
Menu

Use GIVING24 at checkout to save 20% on eCourses and books (some exclusions apply)!

Evolution Of Corrosion Potential Of Carbon Steel Storage Tanks Containing High-Level Nuclear Waste

Picture for Evolution Of Corrosion Potential Of Carbon Steel Storage Tanks Containing High-Level Nuclear Waste
Available for download
Product Number: 51321-16625-SG
Author: Pavan K. Shukla/ Roderick E. Fuentes/ Bruce J. Wiersma/ Crystal Girardot/ Jason Page/ Shawn Campbell
Publication Date: 2021
$0.00
$20.00
$20.00

Millions of gallons of high-level radioactive waste are stored in underground carbon-steel storage tanks at the Hanford site. The waste chemistries are mixtures of organic and inorganic species and are predominantly alkaline. Tank corrosion conditions are partly monitored by measuring corrosion potentials of the tank carbonsteel. In addition, independent studies are conducted using chemical simulants representing the tank waste chemistries. It has been observed that several tanks’ corrosion potentials are invariant with time, however, laboratory experiment data with the simulants exhibit time-dependent evolutions of the corrosion potentials for several tank waste chemistries. Laboratory experimental data is used to assess the risk of pitting and stress corrosion cracking of the tank walls, and corrosion potential is one of the important parameters in the risk assessment matrix. Therefore, it is important to understand the source of corrosion potential evolutions and their implications on the risk assessment. To this end, laboratory experiments were conducted with the simulants of three tank chemistries. Corrosion potential evolutions were measured. The tank steel conditions were represented in each simulant using three coupons with the following surfaces: (i) polished, (ii) mill-scale with corrosion products, and (iii) partly polished surface of a mill-scale coupon. The electrochemical experiments were conducted for approximately 4 months, and corrosion potential evolutions were recorded. This paper presents the electrochemical test results and provides quantification of the evolutions as a function of surface characteristics and waste chemistries. The paper also explores sources of corrosion potential evolutions observed in the experiments.

Key words: Open-circuit potential, passive film, Hanford, high-level radioactive waste

Millions of gallons of high-level radioactive waste are stored in underground carbon-steel storage tanks at the Hanford site. The waste chemistries are mixtures of organic and inorganic species and are predominantly alkaline. Tank corrosion conditions are partly monitored by measuring corrosion potentials of the tank carbonsteel. In addition, independent studies are conducted using chemical simulants representing the tank waste chemistries. It has been observed that several tanks’ corrosion potentials are invariant with time, however, laboratory experiment data with the simulants exhibit time-dependent evolutions of the corrosion potentials for several tank waste chemistries. Laboratory experimental data is used to assess the risk of pitting and stress corrosion cracking of the tank walls, and corrosion potential is one of the important parameters in the risk assessment matrix. Therefore, it is important to understand the source of corrosion potential evolutions and their implications on the risk assessment. To this end, laboratory experiments were conducted with the simulants of three tank chemistries. Corrosion potential evolutions were measured. The tank steel conditions were represented in each simulant using three coupons with the following surfaces: (i) polished, (ii) mill-scale with corrosion products, and (iii) partly polished surface of a mill-scale coupon. The electrochemical experiments were conducted for approximately 4 months, and corrosion potential evolutions were recorded. This paper presents the electrochemical test results and provides quantification of the evolutions as a function of surface characteristics and waste chemistries. The paper also explores sources of corrosion potential evolutions observed in the experiments.

Key words: Open-circuit potential, passive film, Hanford, high-level radioactive waste

Product tags
Also Purchased
Picture for Laboratory Studies Related To External Corrosion Of Hanford’S Double-Shell Tanks In Contact With Concrete Liner
Available for download

Laboratory Studies Related To External Corrosion Of Hanford’S Double-Shell Tanks In Contact With Concrete Liner

Product Number: 51321-16576-SG
Author: K.J. Evans/ S. Chawla/ K.M. Sherer/ B.C. Rollins/ J.A. Beavers/ N. Sridhar/ T.J. Venetz/ N.M. Young/ C.L. Girardot
Publication Date: 2021
$20.00
Picture for An Evaluation Of Cessation Of Nitrate Treatment Of High-Volume Seawater Injection Systems.
Available for download

An Evaluation Of Cessation Of Nitrate Treatment Of High-Volume Seawater Injection Systems.

Product Number: 51321-16604-SG
Author: Anthony F. Mitchell/ Ingun Skjevrak/ Martin Iding
Publication Date: 2021
$20.00
Picture for The Importance Of Surface Preparation Method On The Corrosion Resistance And Mechanical Properties Of Zinc Rich Primers
Available for download

The Importance Of Surface Preparation Method On The Corrosion Resistance And Mechanical Properties Of Zinc Rich Primers

Product Number: 51321-16642-SG
Author: Dr David Morton/ Antoni Prieto/ Tomas Alhambra/ Raquel Morales/ Cristina Juni
Publication Date: 2021
$20.00
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support