Search
Filters
Close

Effect Of Flow On The Corrosion Behavior Of Pipeline Steels Under Supercritical CO2 Environment With Impurities

Product Number: 51321-16656-SG
Author: Martin Colahan; Yoon-Seok Choi; Srdjan Nesic
Publication Date: 2021
$0.00
$20.00
$20.00

Corrosion is a major concern in transmission pipelines that transport captured CO2. While dry CO2 is
noncorrosive, significant corrosion has been reported in dense phase CO2 with trace amounts of water
and impurities such as O2, H2S, SOx, and NOx. The aim of this work is to improve our understanding of
the physicochemical aspects on the corrosion of carbon steels in the high-pressure environments
associated with CO2 transmissions pipelines. The effect of flow on the corrosion of X65 carbon steel was
investigated in a series of autoclave tests with different combinations of impurity concentrations in
supercritical CO2 condition (8 MPa and 35oC). The corrosion rate of samples was determined by weight
loss measurements. The surface morphology and the composition of the corrosion product layers were
analyzed by using surface analytical techniques (SEM and EDS). Localized corrosion was measured via
surface profilometry after corrosion products were removed. Results showed that no corrosion was
observed in the supercritical CO2 with 650 ppm of water, 50 ppm SO2, and 100 ppm NO, but corrosion
occurred when SO2 concentration was increased to 4500 ppm and 40,000 ppm of O2 was added to the
system. The presence of flow significantly accelerated the corrosion of carbon steel. Furthermore,
localized corrosion was observed in the presence of both O2 and flow.

Corrosion is a major concern in transmission pipelines that transport captured CO2. While dry CO2 is
noncorrosive, significant corrosion has been reported in dense phase CO2 with trace amounts of water
and impurities such as O2, H2S, SOx, and NOx. The aim of this work is to improve our understanding of
the physicochemical aspects on the corrosion of carbon steels in the high-pressure environments
associated with CO2 transmissions pipelines. The effect of flow on the corrosion of X65 carbon steel was
investigated in a series of autoclave tests with different combinations of impurity concentrations in
supercritical CO2 condition (8 MPa and 35oC). The corrosion rate of samples was determined by weight
loss measurements. The surface morphology and the composition of the corrosion product layers were
analyzed by using surface analytical techniques (SEM and EDS). Localized corrosion was measured via
surface profilometry after corrosion products were removed. Results showed that no corrosion was
observed in the supercritical CO2 with 650 ppm of water, 50 ppm SO2, and 100 ppm NO, but corrosion
occurred when SO2 concentration was increased to 4500 ppm and 40,000 ppm of O2 was added to the
system. The presence of flow significantly accelerated the corrosion of carbon steel. Furthermore,
localized corrosion was observed in the presence of both O2 and flow.

Also Purchased
Picture for 10193 Effect of Impurities on Corrosion of Steel in Supercritical CO2
Available for download

10193 Effect of Impurities on Corrosion of Steel in Supercritical CO2

Product Number: 51300-10193-SG
ISBN: 10193 2010 CP
Author: Francois Ayello, Kenneth Evans, Ramgopal Thodla, and Narasi Sridhar
Publication Date: 2010
$20.00
Picture for 10196 Effect of Impurities on the Corrosion Behavior of Carbon Steel in Supercritical CO2 - Water
Available for download

10196 Effect of Impurities on the Corrosion Behavior of Carbon Steel in Supercritical CO2 - Water Environments

Product Number: 51300-10196-SG
ISBN: 10196 2010 CP
Author: Yoon-Seok Choi, Srdjan Nešic
Publication Date: 2010
$20.00
Picture for Corrosion of Carbon Steel in Water Equilibriated with Liquid and Supercritical CO2
Available for download

51316-7740-Corrosion of Carbon Steel in Water Equilibriated with Liquid and Supercritical CO2

Product Number: 51316-7740-SG
ISBN: 7740 2016 CP
Author: Bjørn Morland
Publication Date: 2016
$20.00