Menu
Search
Filters
Close
Menu

51313-02705-DIP External Surface Preparation and Coatings for Buried Water Service from an Owner’s Perspective

Picture for DIP External Surface Preparation and Coatings for Buried Water Service from an Owner’s Perspective
Available for download
Product Number: 51313-02705-SG
ISBN: 02705 2013 CP
Author: Mark Corsentino
Publication Date: 2013
$0.00
$20.00
$20.00

Anchorage Water and Wastewater Utility (AWWU) owns and operates approximately x miles of water and x miles of sewer pipelines throughout the Anchorage bowl.
Approximately x miles of the water pipes are cast iron and x miles are DIP.
Approximately x miles of the sewer pipes are cast iron and x miles are DIP.

This paper will focus soley on the x miles of DIP. While the corrosion mechanisms and failures of CIP water mains and CIP and DIP sewers mains occur on a regular basis they don’t have the same risk associated with corrosion related failures of DIP.

Because of the environment of the Anchorage Bowl (high seismic expansive soils corrosive soils etc.) having a robust pipe is necessary in order for the assets to survive. Until as recently as 2009 AWWU only allowed DIP water and sewer mains to be installed because of it’s structural properties ability to withstand the harsh Alaskan environments.

AWWU has experienced many premature failures of DIP as a result of external corrosion. These failures have occurred on both bare DIP and DIP installed with polyethylene encasement installed in accordance with AWWA Cxxx.

Because of the depth of bury of water mains in the Anchorage Bowl 10-foot minimum cover the cost associated with the repairs and ultimate early replacement of this pipe has had a huge impact on the ratepayers. And because of the huge cost associated with the deep excavations the pipe materials itself only contributes to about 10% of the project costs. Therefore AWWU made the decision to install external tightly bonded coatings on DIP installations in corrosive environments or go with non-metallic piping.

This paper will review some of the case studies of the different types of coating materials we’ve used on DIP and the lessons we’ve learned from them.
 

Anchorage Water and Wastewater Utility (AWWU) owns and operates approximately x miles of water and x miles of sewer pipelines throughout the Anchorage bowl.
Approximately x miles of the water pipes are cast iron and x miles are DIP.
Approximately x miles of the sewer pipes are cast iron and x miles are DIP.

This paper will focus soley on the x miles of DIP. While the corrosion mechanisms and failures of CIP water mains and CIP and DIP sewers mains occur on a regular basis they don’t have the same risk associated with corrosion related failures of DIP.

Because of the environment of the Anchorage Bowl (high seismic expansive soils corrosive soils etc.) having a robust pipe is necessary in order for the assets to survive. Until as recently as 2009 AWWU only allowed DIP water and sewer mains to be installed because of it’s structural properties ability to withstand the harsh Alaskan environments.

AWWU has experienced many premature failures of DIP as a result of external corrosion. These failures have occurred on both bare DIP and DIP installed with polyethylene encasement installed in accordance with AWWA Cxxx.

Because of the depth of bury of water mains in the Anchorage Bowl 10-foot minimum cover the cost associated with the repairs and ultimate early replacement of this pipe has had a huge impact on the ratepayers. And because of the huge cost associated with the deep excavations the pipe materials itself only contributes to about 10% of the project costs. Therefore AWWU made the decision to install external tightly bonded coatings on DIP installations in corrosive environments or go with non-metallic piping.

This paper will review some of the case studies of the different types of coating materials we’ve used on DIP and the lessons we’ve learned from them.
 

Product tags
Also Purchased
Picture for 01428 INSPECTION OF HOT DIP GALVANIZED ARTICLES
Available for download

01428 INSPECTION OF HOT DIP GALVANIZED ARTICLES

Product Number: 51300-01428-SG
ISBN: 01428 2001 CP
Author: Thomas J. Langill
Publication Date: 2000
$20.00

Hot dip galvanizing steel articles after fabrication is one of the most widely used methods to provide corrosion protection. As a final step in the process, the hot dip galvanized coating is inspected for compliance with specifications. Correct measurement techniques and accurate interpretation of the results are necessary to provide an acceptable hot dip galvanized coating.
Picture for Service Life Modeling: An Assessment Tool for Existing Concrete Structures
Available for download

51313-02726-Service Life Modeling: An Assessment Tool for Existing Concrete Structures

Product Number: 51313-02726-SG
ISBN: 02726 2013 CP
Author: Jonah Kurth
Publication Date: 2013
$20.00
Picture for Potential-Dependent Chloride Threshold in Reinforced Concrete Damage Prediction
Available for download

51313-02704-Potential-Dependent Chloride Threshold in Reinforced Concrete Damage Prediction

Product Number: 51313-02704-SG
ISBN: 02704 2013 CP
Author: Andrea Sanchez
Publication Date: 2013
$20.00
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support