Server maintenance is scheduled for Saturday, December 21st between 6am-10am CST.

During that time, parts of our website will be affected until maintenance is completed. Thank you for your patience.

Menu
Search
Filters
Close
Menu

Use GIVING24 at checkout to save 20% on eCourses and books (some exclusions apply)!

Corrosion Of Open-Cell Aluminum Foams In Natural Seawater

Picture for Corrosion Of Open-Cell Aluminum Foams In Natural Seawater
Available for download
Product Number: 51321-16926-SG
Author: Alessandro Pereyra; Rogine Gomez; Ho Lun Chan; Vilupanur Ravi
Publication Date: 2021
$0.00
$20.00
$20.00

The microbiologically induced corrosion (MIC) behavior of open-cell aluminum foams (UNS A96101) was
evaluated in sodium chloride solutions. Cast and heat treated UNS A96101 foams of relative densities in
the 6-8% range and pore densities of 10, 20, and 40 pores per inch (PPI) were subjected to immersion
tests under three different conditions. In one set of tests, coupons were subjected to immersion in
simulated seawater (3.5 wt.% NaCl) under laboratory conditions in accordance with the ASTM G31-12a
standard. Another set of experiments was performed by immersing foam test coupons in natural seawater
off Terminal Island, Long Beach, California, for 7 and 14 days. An additional series of tests was conducted
by immersing coupons in natural seawater aged in the laboratory. The surface of the foam coupons
following each of the immersion tests was cleaned using an acid cleaning procedure that was developed
expressly for quantifying foam corrosion. The microstructure and surface morphology were then
characterized using scanning electron microscopy, coupled

The microbiologically induced corrosion (MIC) behavior of open-cell aluminum foams (UNS A96101) was
evaluated in sodium chloride solutions. Cast and heat treated UNS A96101 foams of relative densities in
the 6-8% range and pore densities of 10, 20, and 40 pores per inch (PPI) were subjected to immersion
tests under three different conditions. In one set of tests, coupons were subjected to immersion in
simulated seawater (3.5 wt.% NaCl) under laboratory conditions in accordance with the ASTM G31-12a
standard. Another set of experiments was performed by immersing foam test coupons in natural seawater
off Terminal Island, Long Beach, California, for 7 and 14 days. An additional series of tests was conducted
by immersing coupons in natural seawater aged in the laboratory. The surface of the foam coupons
following each of the immersion tests was cleaned using an acid cleaning procedure that was developed
expressly for quantifying foam corrosion. The microstructure and surface morphology were then
characterized using scanning electron microscopy, coupled

Product tags
Also Purchased
Picture for The Effect Of Build Orientation On The Corrosion Behavior Of SLM 304L Alloys
Available for download

The Effect Of Build Orientation On The Corrosion Behavior Of SLM 304L Alloys

Product Number: 51321-16904-SG
Author: Ho Lun Chan; Armando Shehi; Tan Pan; Joseph Newkirk; Vilupanur A. Ravi
Publication Date: 2021
$20.00
Picture for Chemical Cleaning for the Corrosion Studies of Open-Cell Aluminum 6101 Foams
Available for download

Chemical Cleaning for the Corrosion Studies of Open-Cell Aluminum 6101 Foams

Product Number: 51321-16911-SG
Author: Rogine Gomez; Ho Lun Chan; Kevin Guo; Alessandro Pereya; and Vilupanur Ravi
Publication Date: 2021
$20.00
Picture for Corrosion Behavior of Additively Manufactured and Wrought Ti-6Al-4V Alloys in Phosphate Buffered Saline Solutions
Available for download

Corrosion Behavior of Additively Manufactured and Wrought Ti-6Al-4V Alloys in Phosphate Buffered Saline Solutions

Product Number: 51321-16930-SG
Author: Armando Shehi; Olivia Dingus; Harjot Singh; Eric Jimenez-Rangel; Samad Firdosy; Vilupanur A. Ravi
Publication Date: 2021
$20.00
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support