Menu
Search
Filters
Close
Menu

51316-7191-Application of Low Cr Steels in the Presence of Corrosion Inhibitors

Picture for Application of Low Cr Steels in the Presence of Corrosion Inhibitors
Available for download
Product Number: 51316-7191-SG
ISBN: 7191 2016 CP
Author: Matin Momeni
Publication Date: 2016
$0.00
$20.00
$20.00
A number of low chromium content steels have been developed with the intent of providing increased corrosion resistance in CO2 containing oil and gas environments. The chromium content can be 0.5% 1% or 3% in these alloys. It is however probable that these alloys would be used in combination with chemical corrosion inhibition and there is little data on how inhibitors would interact with this class of alloys. Experience with low nickel content alloys indicates that alloy additions can adversely affect inhibitor performance and it is thus of interest to examine the effect of chromium additions. This paper reports a laboratory study into the effectiveness of corrosion inhibitors for corrosion prevention of low chromium content alloys. The study concentrates upon alloys with up to 1% Cr. Techniques used include static and dynamic tests monitored by electrochemical methods such as linear polarisation resistance (LPR) and electrochemical impedance spectroscopy (EIS).
A number of low chromium content steels have been developed with the intent of providing increased corrosion resistance in CO2 containing oil and gas environments. The chromium content can be 0.5% 1% or 3% in these alloys. It is however probable that these alloys would be used in combination with chemical corrosion inhibition and there is little data on how inhibitors would interact with this class of alloys. Experience with low nickel content alloys indicates that alloy additions can adversely affect inhibitor performance and it is thus of interest to examine the effect of chromium additions. This paper reports a laboratory study into the effectiveness of corrosion inhibitors for corrosion prevention of low chromium content alloys. The study concentrates upon alloys with up to 1% Cr. Techniques used include static and dynamic tests monitored by electrochemical methods such as linear polarisation resistance (LPR) and electrochemical impedance spectroscopy (EIS).
Product tags
Also Purchased
Picture for Failure Analysis and Investigation Methods of Boiler Tubes Corrosion/Case Study
Available for download

51316-7188-Failure Analysis and Investigation Methods of Boiler Tubes Corrosion/Case Study

Product Number: 51316-7188-SG
ISBN: 7188 2016 CP
Author: hajatolah almasi
Publication Date: 2016
$20.00

The purpose of this study is to investigate the effect of amount of oxygen on corrosion rate of steam loop. Consequently, to eliminate failure, more effective steam quality monitoring concept is recommended.
Picture for Sour Service Fatigue and Fracture Behavior of High Strength Steels
Available for download

51316-7183-Sour Service Fatigue and Fracture Behavior of High Strength Steels

Product Number: 51316-7183-SG
ISBN: 7183 2016 CP
Author: Thodla Ramgopal
Publication Date: 2016
$20.00

Fatigue Crack Growth Rate (FCGR) and fracture toughness behavior of high strength steels used in drilling riser applications was investigated in sour environments. Frequency scan tests were performed were performed on X80 C110 and S135 in moderate to mildly sour environments.
Picture for Amine Corrosion in Gas Sweetening Plant: Causes and Minimization on Real Case Study
Available for download

51316-7187-Amine Corrosion in Gas Sweetening Plant: Causes and Minimization on Real Case Study

Product Number: 51316-7187-SG
ISBN: 7187 2016 CP
Author: hajatolah almasi
Publication Date: 2016
$20.00

This paper is presented as a practical guide to identifying the causes of corrosion in different sections of gas sweetening trains and ways to control and minimize corrosion in amine plants.
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support