Menu
Search
Filters
Close
Menu

51318-11200-Alloy 699 XA: A new Alloy for Application in Petrochemical Industry under Metal Dusting Condititions

Picture for Alloy 699 XA: A new Alloy for Application in Petrochemical Industry under Metal Dusting Condititions
Available for download

Alloy 699 XA is a new alloy, which was developed for application in petrochemical industry under metal dusting conditions at high pressure. It contains 30% chromium and 2% aluminum.

Product Number: 51318-11200-SG
Author: Heike Hattendorf / Jutta Kloewer / Alejandra López
Publication Date: 2018
Industry: Materials Selection and Design
$0.00
$20.00
$20.00

Alloy 699 XA is a new alloy, which was developed for application in petrochemical industry under metal dusting conditions at high pressure. It contains 30% chromium and 2% aluminum. Due to this it showed a remarkable larger time to first pit in comparison to N06025 and N06690 in an examination in the highly carburization metal dusting gas 37% CO, 9% H2O, 7% CO2, 46% H2, at 600 °C at 20 bar. Strength properties and creep properties are similar or better than N06601. Ductility at room temperature is comparable to N06601. The Charpy V-notch impact energy and the elongation in a tensile test at 600°C are still above the lower limits after aging solution annealed samples for 3000 h at 600°C. Welding procedure test according to DIN EN ISO 15614-1 was successfully done on 16 mm plate with a matching filler metal. Alloy 699 XA has been produced as plate, bar, seamless tube and wire.

Key words: Alloy 699 XA, metal dusting, creep strength, ductility at room temperature, V- notch impact energy, welding, plate, bar, tube, wire

Alloy 699 XA is a new alloy, which was developed for application in petrochemical industry under metal dusting conditions at high pressure. It contains 30% chromium and 2% aluminum. Due to this it showed a remarkable larger time to first pit in comparison to N06025 and N06690 in an examination in the highly carburization metal dusting gas 37% CO, 9% H2O, 7% CO2, 46% H2, at 600 °C at 20 bar. Strength properties and creep properties are similar or better than N06601. Ductility at room temperature is comparable to N06601. The Charpy V-notch impact energy and the elongation in a tensile test at 600°C are still above the lower limits after aging solution annealed samples for 3000 h at 600°C. Welding procedure test according to DIN EN ISO 15614-1 was successfully done on 16 mm plate with a matching filler metal. Alloy 699 XA has been produced as plate, bar, seamless tube and wire.

Key words: Alloy 699 XA, metal dusting, creep strength, ductility at room temperature, V- notch impact energy, welding, plate, bar, tube, wire

Product tags
Also Purchased
Picture for 00257 Alloy Selection for Environments Which
Available for download

00257 Alloy Selection for Environments Which Promote Metal Dusting

Product Number: 51300-00257-SG
ISBN: 00257 2000 CP
Author: Brian A. Baker and Gaylord D. Smith
$20.00
Picture for 98445 METAL DUSTING OF NICKEL-CONTAINING
Available for download

98445 METAL DUSTING OF NICKEL-CONTAINING ALLOYS

Product Number: 51300-98445-SG
ISBN: 98445 1998 CP
Author: B. A. Baker, G. D. Smith
$20.00
Picture for Investigation on Metal Dusting Corrosion Phenomena Over Incoloy 800
Available for download

Investigation on Metal Dusting Corrosion Phenomena Over Incoloy 800

Product Number: 51317--9439-SG
ISBN: 9439 2017 CP
Author: Xiaoyang Guo
Publication Date: 2017
$20.00

UNS N08800 alloy coupons were prepared, polished and oxidized in diluted steam at 540 ºC. Formation of carbon on the surface of the pre-oxidized samples was investigated by exposure to reducing, highly carburizing atmosphere (CO in Ar) at 20 bar and varying temperature (550- 750 ºC).
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support