Server maintenance is scheduled for Saturday, December 21st between 6am-10am CST.

During that time, parts of our website will be affected until maintenance is completed. Thank you for your patience.

Menu
Search
Filters
Close
Menu

98194 Erosion-oxidation of mild steel in a temperature gradient

Picture for 98194 Erosion-oxidation of mild steel in a
Available for download
Product Number: 51300-98194-SG
ISBN: 98194 1998 CP
Author: T.E. Howes, P.M. Rogers, J.A. Little, I.M. Hutchings
$0.00
$20.00
$20.00
Thinning of heat-exchanger tubes by crosion-corrosion has been a problem in fluidized bed combustors (FBCs), particularly at lower metal temperatures where thicker, mechanically protective oxide scales are unable to form. Many laboratory-scale tests have shown a decrease in material loss at higher temperatures, similar to that observed in FBC boilers. but also show a decreasein wastage al low temperatures (e.g. 200°C) which has not been detected in boilers. It has been suggested that this difference is due to the laboratory tests being carried out isothermally, whereas in a FBC boiler the fluidized bed is considerably hotter than the surface ol the metal heat exchanger tubing. In this laboratory study the simulation was therefore improved by internally cooling one of the two low carbon steel specimens which were rotated in a horizontal plane within a lightly fluidized bed with relative particle velocities of ...
Thinning of heat-exchanger tubes by crosion-corrosion has been a problem in fluidized bed combustors (FBCs), particularly at lower metal temperatures where thicker, mechanically protective oxide scales are unable to form. Many laboratory-scale tests have shown a decrease in material loss at higher temperatures, similar to that observed in FBC boilers. but also show a decreasein wastage al low temperatures (e.g. 200°C) which has not been detected in boilers. It has been suggested that this difference is due to the laboratory tests being carried out isothermally, whereas in a FBC boiler the fluidized bed is considerably hotter than the surface ol the metal heat exchanger tubing. In this laboratory study the simulation was therefore improved by internally cooling one of the two low carbon steel specimens which were rotated in a horizontal plane within a lightly fluidized bed with relative particle velocities of ...
PRICE BREAKS - The more you buy, the more you save
Quantity
1+
5+
Price
$20.00
$20.00
Product tags
Also Purchased
Picture for 98192 LABORATORY STUDIES OF THE CORROSION
Available for download

98192 LABORATORY STUDIES OF THE CORROSION OF NICKEL - BASED ALLOYS BY PURE CALCIUM SULPHATE - INFLUENCE OF ENVIRONMENTAL FACTORS

Product Number: 51300-98192-SG
ISBN: 98192 1998 CP
Author: M. J. Pomeroy, A. Farhat, P. McHale
$20.00
Picture for 98187 THE EFFECTS OF RAPID THERMAL CYCLING
Available for download

98187 THE EFFECTS OF RAPID THERMAL CYCLING ON THE CORROSION OF SOME HIGH-TEMPERATURE ALLOYS IN A SIMULATED COAL-GASIFICATION ENVIRONMENT

Product Number: 51300-98187-SG
ISBN: 98187 1998 CP
Author: F.H. Stott, C.R. Williams
$20.00
Picture for 98197 CORROSION ASPECTS IN THE DESIGN AND
Available for download

98197 CORROSION ASPECTS IN THE DESIGN AND OPERATION OF ODS INDIRECT FIRED HEAT EXCHANGERS

Product Number: 51300-98197-SG
ISBN: 98197 1998 CP
Author: F. Starr
$20.00
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support