Server maintenance is scheduled for Saturday, December 21st between 6am-10am CST.

During that time, parts of our website will be affected until maintenance is completed. Thank you for your patience.

Menu
Search
Filters
Close
Menu

08594 In-situ Monitoring of Corrosion During a Laboratory Simulation of Oxalic Acid Chemical Cleaning

Picture for 08594 In-situ Monitoring of Corrosion During a Laboratory Simulation of Oxalic Acid Chemical Cleanin
Available for download
Product Number: 51300-08594-SG
ISBN: 08594 2008 CP
Author: B. Wiersma, J. Mickalonis, D. Beam, M. Poirier, D. Herman, S. Fink, J. Pareizs, and F. Fondeur
Publication Date: 2008
$0.00
$20.00
$20.00
The Savannah River Site (SRS) will disperse or dissolve precipitated metal oxides using oxalic acid as part of radioactive waste tank closure operations. To better understand the conditions of oxalic acid cleaning of the carbon steel waste tanks, laboratory simulations of the process were conducted to determine the corrosion rate of carbon steel and the generation of gases such as hydrogen and carbon dioxide. Open circuit potential measurements, linear polarization measurements, and coupon immersion tests were performed in-situ to determine the corrosion behavior of carbon steel during the demonstration. Vapor phase samples were analyzed continuously to determine its constituents. The combined results from these measurements indicated that in aerated environments, such as the tank, that the corrosion and hydrogen generation rates are manageable for short contact times during waste removal operations.
The Savannah River Site (SRS) will disperse or dissolve precipitated metal oxides using oxalic acid as part of radioactive waste tank closure operations. To better understand the conditions of oxalic acid cleaning of the carbon steel waste tanks, laboratory simulations of the process were conducted to determine the corrosion rate of carbon steel and the generation of gases such as hydrogen and carbon dioxide. Open circuit potential measurements, linear polarization measurements, and coupon immersion tests were performed in-situ to determine the corrosion behavior of carbon steel during the demonstration. Vapor phase samples were analyzed continuously to determine its constituents. The combined results from these measurements indicated that in aerated environments, such as the tank, that the corrosion and hydrogen generation rates are manageable for short contact times during waste removal operations.
Product tags
Also Purchased
Picture for 08593 Electrochemical Studies on the Corrosion of Carbon Steel in Oxalic Acid Cleaning Solutions
Available for download

08593 Electrochemical Studies on the Corrosion of Carbon Steel in Oxalic Acid Cleaning Solutions

Product Number: 51300-08593-SG
ISBN: 08593 2008 CP
Author: B. Wiersma and J. Mickalonis
Publication Date: 2008
$20.00
Picture for 08564 Predicting the Curvature of the Interface for an Oil/Water Flow and its Effects on Corrosion
Available for download

08564 Predicting the Curvature of the Interface for an Oil/Water Flow and its Effects on Corrosion

Product Number: 51300-08564-SG
ISBN: 08564 2008 CP
Author: Chuntao Deng, Keith Adams, and Trevor MacFarlane
Publication Date: 2008
$20.00
Picture for 08579 Anodic and Cathodic Behavior of Mill Annealed and Topologically Closed Packed Alloy 22, in Chl
Available for download

08579 Anodic and Cathodic Behavior of Mill Annealed and Topologically Closed Packed Alloy 22, in Chloride Solutions

Product Number: 51300-08579-SG
ISBN: 08579 2008 CP
Author: Ricardo M. Carranza, Martin A. Rodriguez, and Raul B. Rebak
Publication Date: 2008
$20.00
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support