Menu
Search
Filters
Close
Menu

07011 PERFORMANCE TESTING OF NON-SLIP DECK COATINGS

Picture for 07011 PERFORMANCE TESTING OF NON-SLIP DECK COATINGS
Available for download
Product Number: 51300-07011-SG
ISBN: 07011 2007 CP
Author: Neil Wilds
Publication Date: 2007
$0.00
$20.00
$20.00
The deck of an offshore installation, i.e. fixed platform or FPSO, is one of the critical areas for corrosion protection. Not only are the deck areas subjected to continuous impact and abrasion, they are also required to be sea water resistant and oil resistant. Offshore structures have differing requirements for decks, be it ‘laydown’ areas or general nonslip for safety requirements on walkways. Therefore, testing of the various ‘heavy duty’ thick film and ‘light duty’ think film deck systems is very important and often time consuming. This paper details the recent work carried out to assess the suitability of coatings for use in offshore deck areas. This paper details the testing and results of an extensive evaluation of various candidate formulations based upon Hydrocarbon Modified Epoxies, Pure Epoxies, Glass Flake Epoxies and UHB Epoxies, together with coarse (1.8mm – 3.0mm) and fine (0.5mm – 1.8mm) aggregates. The test methods utilized show the differences between heavy duty and light duty systems with regard to impact strength and cyclic corrosion.
The deck of an offshore installation, i.e. fixed platform or FPSO, is one of the critical areas for corrosion protection. Not only are the deck areas subjected to continuous impact and abrasion, they are also required to be sea water resistant and oil resistant. Offshore structures have differing requirements for decks, be it ‘laydown’ areas or general nonslip for safety requirements on walkways. Therefore, testing of the various ‘heavy duty’ thick film and ‘light duty’ think film deck systems is very important and often time consuming. This paper details the recent work carried out to assess the suitability of coatings for use in offshore deck areas. This paper details the testing and results of an extensive evaluation of various candidate formulations based upon Hydrocarbon Modified Epoxies, Pure Epoxies, Glass Flake Epoxies and UHB Epoxies, together with coarse (1.8mm – 3.0mm) and fine (0.5mm – 1.8mm) aggregates. The test methods utilized show the differences between heavy duty and light duty systems with regard to impact strength and cyclic corrosion.
Product tags
Also Purchased
Picture for 07076 A Guideline for the corrosion protection of FPSO’s
Available for download

07076 A Guideline for the corrosion protection of FPSO’s

Product Number: 51300-07076-SG
ISBN: 07076 2007 CP
Author: Karl P. Fischer, Tomas Sydberger, Kari Lønvik, and Idun B. Tiller
Publication Date: 2007
$20.00
Picture for Ultra Tolerant Coating Technology: The 15 Years Path From Maintenance to New Construction
Available for download

Ultra Tolerant Coating Technology: The 15 Years Path From Maintenance to New Construction

Product Number: 51317--9235-SG
ISBN: 9235 2017 CP
Author: Joao Salvado Azevedo
Publication Date: 2017
$20.00

Poor performance of materials…is why…more realistic application conditions are needed. An ultra-tolerant material, compatible with flash rust, humidity, poor profile and cold application conditions, potentially with Ultra High Pressure (UHP) water jetting, is presented in this paper.
Picture for 08022 Optimization of Application Procedure for Non-Skid Coating Materials in Offshore Structures
Available for download

08022 Optimization of Application Procedure for Non-Skid Coating Materials in Offshore Structures

Product Number: 51300-08022-SG
ISBN: 08022 2008 CP
Author: Chung Seo Park, Mong Kyu Chung, Eun Ha Song, Kwang Ki Baek, and E. S. Chung
Publication Date: 2008
$20.00
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support