Menu
Search
Filters
Close
Menu

02358 CORROSION RESISTANCE OF FE-CR AND NI-CR ALLOYS IN OXIDIZING SUPERCRITICAL HCL SOLUTION

Picture for 02358 CORROSION RESISTANCE OF FE-CR AND...
Available for download
Product Number: 51300-02358-SG
ISBN: 02358 2002 CP
Author: Nobuyoshi Hara, Satoshi Tanaka, Saiko Soma, and Katsuhisa Sugimoto
$0.00
$20.00
$20.00
The corrosion behavior of binary Fe-Cr (10-40%Cr) and Ni-Cr alloys (10-30%Cr) has been examined in 1mM-HCl+0.6M-H2O2 at 500°C and 29.4MPa. By comparing the weight loss due to oxidation with that due to dissolution and examining the time dependence of the weight losses, it was found that oxidation was a dominant corrosion process of the alloys at 500°C. The corrosion rate decreased with increasing Cr content and reached a minimum at 30% and 20% Cr for Fe-Cr and Ni-Cr alloys, respectively. A further increase in the Cr content increased the corrosion rate. These results can be explained by taking account of both beneficial and detrimental effects of Cr: increasing the Cr content improves oxidation resistance but accelerates transpassive dissolution at 500°C. The addition of a small amount of Mo (1-2%) to Fe-Cr alloys (> 25%Cr) was found to be effective for further improvements of the corrosion resistance of the alloys. The corrosion tests of Fe-Cr alloys were performed at various temperatures between 300 and 500°C. The results of the tests suggested that the transpassive dissolution rate of Cr was high at temperatures around 350°C and above 500°C, but was low at temperatures of 400-450°C. At these temperatures, which is just above the critical point, the corrosion resistance of Fe-Cr alloys was improved significantly with increasing Cr content and no detrimental effect of Cr could be observed even at the Cr contents as high as 40%. Keywords: supercritical water oxidation, hydrochloric acid, Fe-Cr alloy, Ni-Cr alloy, oxidation, dissolution, pitting corrosion, transpassive dissolution.
The corrosion behavior of binary Fe-Cr (10-40%Cr) and Ni-Cr alloys (10-30%Cr) has been examined in 1mM-HCl+0.6M-H2O2 at 500°C and 29.4MPa. By comparing the weight loss due to oxidation with that due to dissolution and examining the time dependence of the weight losses, it was found that oxidation was a dominant corrosion process of the alloys at 500°C. The corrosion rate decreased with increasing Cr content and reached a minimum at 30% and 20% Cr for Fe-Cr and Ni-Cr alloys, respectively. A further increase in the Cr content increased the corrosion rate. These results can be explained by taking account of both beneficial and detrimental effects of Cr: increasing the Cr content improves oxidation resistance but accelerates transpassive dissolution at 500°C. The addition of a small amount of Mo (1-2%) to Fe-Cr alloys (> 25%Cr) was found to be effective for further improvements of the corrosion resistance of the alloys. The corrosion tests of Fe-Cr alloys were performed at various temperatures between 300 and 500°C. The results of the tests suggested that the transpassive dissolution rate of Cr was high at temperatures around 350°C and above 500°C, but was low at temperatures of 400-450°C. At these temperatures, which is just above the critical point, the corrosion resistance of Fe-Cr alloys was improved significantly with increasing Cr content and no detrimental effect of Cr could be observed even at the Cr contents as high as 40%. Keywords: supercritical water oxidation, hydrochloric acid, Fe-Cr alloy, Ni-Cr alloy, oxidation, dissolution, pitting corrosion, transpassive dissolution.
PRICE BREAKS - The more you buy, the more you save
Quantity
1+
5+
Price
$20.00
$20.00
Product tags
Also Purchased
Picture for The Performance of Corrosion Resistant Ni-Cr-Mo Alloys in Concentrated Hydrochloric Acid
Available for download

51317--9639-The Performance of Corrosion Resistant Ni-Cr-Mo Alloys in Concentrated Hydrochloric Acid

Product Number: 51317--9639-SG
ISBN: 9639 2017 CP
Author: Suresh Divi
Publication Date: 2017
$20.00

This paper is to study the corrosion performance of various Ni based alloys in high concentrations of HCl acids below the boiling point. Nickel-based alloys C-276 (UNS N10276), C-22 (UNS N06022), C-2000 (UNS N06200), Hybrid-BC1 (UNS N10362) and B-3 (UNS N10675) were investigated.

 
Picture for 05334 Electrochemical Behavior of Nickel Alloys in
Available for download

05334 Electrochemical Behavior of Nickel Alloys in HCl Solutions Containing Oxidizing Impurities

Product Number: 51300-05334-SG
ISBN: 05334 2005 CP
Author: Nacera Sabrina Meck and Paul Crook, Haynes International; Raul B. Rebak, Lawrence Livermore National
$20.00
Picture for 05392 Corrosion Behavior of Ni Base Alloys and 316
Available for download

05392 Corrosion Behavior of Ni Base Alloys and 316 Stainless Steel in Less Oxidizing or Reducing SCW Containing HCl

Product Number: 51300-05392-SG
ISBN: 05392 2005 CP
Author: Ryutaro Fujisawa and Kenji Nishimura; Takashi Nishida and Motohiro Sakaihara; Yoshiaki Kurata; Yutak
$20.00
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support