Menu
Search
Filters
Close
Menu

02093 IN SITU EVALUATION OF PIPELINE COATINGS

Picture for 02093 IN SITU EVALUATION OF PIPELINE COATINGS
Available for download
Product Number: 51300-02093-SG
ISBN: 02093 2002 CP
Author: Ashok Kumar and Larry D. Stephenson
$0.00
$20.00
$20.00
In-situ laboratory testing of pipe coatings was conducted on three steel pipes measuring 2.5 inches (6.35 cm) in outer diameter X 6 feet (183 cm) long that had been buried in Champaign, Illinois soil for the past 14 years. Prior to burial, two of the pipes had been coated with 0.0315 inch (0.8 mm) thick polyethylene sheaths, and intentional coating flaws were introduced by stripping the coating along the length of the pipe to create bare areas measuring 1% and 10% the total pipe surface area, respectively. The third pipe was not coated prior to burial (i.e., 100% bare). The soil was saturated with water, and electrochemical impedance spectroscopy (EIS) was conducted. EIS measurements indicated that the relative degree of pipe coating degradation can be estimated without digging up the pipe by using a simulated equivalent electrical circuit model.
In-situ laboratory testing of pipe coatings was conducted on three steel pipes measuring 2.5 inches (6.35 cm) in outer diameter X 6 feet (183 cm) long that had been buried in Champaign, Illinois soil for the past 14 years. Prior to burial, two of the pipes had been coated with 0.0315 inch (0.8 mm) thick polyethylene sheaths, and intentional coating flaws were introduced by stripping the coating along the length of the pipe to create bare areas measuring 1% and 10% the total pipe surface area, respectively. The third pipe was not coated prior to burial (i.e., 100% bare). The soil was saturated with water, and electrochemical impedance spectroscopy (EIS) was conducted. EIS measurements indicated that the relative degree of pipe coating degradation can be estimated without digging up the pipe by using a simulated equivalent electrical circuit model.
PRICE BREAKS - The more you buy, the more you save
Quantity
1+
5+
Price
$20.00
$20.00
Product tags
Also Purchased
Picture for 06047 Protective Pipeline Coating Evaluation
Available for download

06047 Protective Pipeline Coating Evaluation

Product Number: 51300-06047-SG
ISBN: 06047 2006 CP
Author: Sankara Papavinasam, R.Winston Revie
$20.00
Picture for 01627 PIPELINE CORROSION MANAGEMENT
Available for download

01627 PIPELINE CORROSION MANAGEMENT

Product Number: 51300-01627-SG
ISBN: 01627 2001 CP
Author: Jane Dawson, Julia Race, Stephen Peet and Ravi Krishnamurthy
$20.00
Picture for 03046 OPTIMIZATION OF PIPELINE COATING
Available for download

03046 OPTIMIZATION OF PIPELINE COATING AND BACKFILL SELECTION

Product Number: 51300-03046-SG
ISBN: 03046 2003 CP
Author: Richard Espiner, Ian Thompson, Julian Barnett
Publication Date: 2003
$20.00

Pipeline coatings' mechanical properties in relation to the need to use imported or site-processed bedding and backfill materials to create the pipeline's habitat, and describes a program of  laboratory and site tests carried out for two major pipeline operators.
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support