Menu
Search
Filters
Close
Menu

Save 20% on select titles with code HIDDEN24 - Shop The Sale Now

02088 ASSESSMENT OF CORROSION IN LOW TOUGHNESS PIPE MATERIAL

Picture for 02088 ASSESSMENT OF CORROSION IN LOW...
Available for download
Product Number: 51300-02088-SG
ISBN: 02088 2002 CP
Author: Julia Race and Stephen Peet
$0.00
$20.00
$20.00
Corrosion is an increasing problem in ageing pipelines world-wide, and the conditions under which a corrosion defect fails have been the subject of extensive world-wide research in the last 30 years. Various organisations have conducted full-scale tests on artificial and real corrosion defects, which have allowed the development of defect assessment criteria. In modern linepipe with high toughness, smooth corrosion defects will fail by ductile initiation and plastic collapse. In this case, the remaining strength of pipelines can be assessed using codified methods. However, for low toughness pipe material the dominant failure mode may be brittle fracture. This is of particular concern in older pipelines, in early Electric Resistance Welded (ERW) welded pipe and pipelines operating at low temperature. In this case, plastic collapse methods may be inappropriate and unconservative and careful consideration must be given to the selection of assessment methods. This paper reviews the available assessment methods for corrosion in low toughness pipe material and demonstrates how these methods are selected and applied to corrosion defects detected in intelligent pig inspections.
Corrosion is an increasing problem in ageing pipelines world-wide, and the conditions under which a corrosion defect fails have been the subject of extensive world-wide research in the last 30 years. Various organisations have conducted full-scale tests on artificial and real corrosion defects, which have allowed the development of defect assessment criteria. In modern linepipe with high toughness, smooth corrosion defects will fail by ductile initiation and plastic collapse. In this case, the remaining strength of pipelines can be assessed using codified methods. However, for low toughness pipe material the dominant failure mode may be brittle fracture. This is of particular concern in older pipelines, in early Electric Resistance Welded (ERW) welded pipe and pipelines operating at low temperature. In this case, plastic collapse methods may be inappropriate and unconservative and careful consideration must be given to the selection of assessment methods. This paper reviews the available assessment methods for corrosion in low toughness pipe material and demonstrates how these methods are selected and applied to corrosion defects detected in intelligent pig inspections.
PRICE BREAKS - The more you buy, the more you save
Quantity
1+
5+
Price
$20.00
$20.00
Product tags
Also Purchased
Picture for Fracture Toughness Testing Methods in H2S Containing Environment for Metallic Materials
Available for download

Fracture Toughness Testing Methods in H2S Containing Environment for Metallic Materials

Product Number: 51317--8930-SG
ISBN: 8930 2017 CP
Author: Arshad Bajvani Gavanluei
Publication Date: 2017
$20.00

Available fracture toughness (FT) test methodologies are reviewed in this publication to compare their details.
Picture for Factors Affecting Impact Toughness in Carbon Steels
Available for download

Factors Affecting Impact Toughness in Carbon Steels

Product Number: 51319-13361-SG
Author: Sangeetha Cathapuram
Publication Date: 2019
$20.00

Over the last five years there have been numerous reports of failures of carbon steel A105 flanges A234 fittings and some A106 seamless pipe. The failure primarily occurred in newly constructed material and the nature of the failures was Brittle Fracture with very low Charpy V-notch values (3 ft-lbs) at room temperatures when the expected notch toughness was higher than 40 ft-lbs. Typically these steels are exempted from impact testing for upto temperatures -20°F (-29°C) per ASME B31.3. It has been found that the cause of low toughness was a gradual change in the chemical composition of the steel during the steel making process primarily low Mn to C ratios (even though within specification limits) addition of alloying elements like boron vanadium kind of heat treatment applied grain size etc.This paper will identify and document how the different factors like low Mn high C addition of boron and resultant grain size affects the impact toughness of steels based on a review of currently available literature. A comparison with impact properties of other product forms of carbon steel like plates etc. will be presented. A review of the current industry best practices and recommendations to avoid brittle fracture due to metallurgical factors without affecting other mechanical properties during hydrostatic testing cold startups and other low temperature in service conditions will be documented and presented.
Picture for 02061 EFFECT OF FILLER MATERIAL SELECTION...
Available for download

02061 EFFECT OF FILLER MATERIAL SELECTION ON STRESS STRAIN BUILD UP AND STRESS CORROSION CRACKING RESISTANCE OF WELDED SUPERMARTENSITIC STAINLESS STEEL PIPES

Product Number: 51300-02061-SG
ISBN: 02061 2002 CP
Author: Thomas Boellinghaus and Thomas Kannengiesser,
$20.00
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support