Server maintenance is scheduled for Saturday, December 21st between 6am-10am CST.

During that time, parts of our website will be affected until maintenance is completed. Thank you for your patience.

Menu
Search
Filters
Close
Menu

00061 THE EFFECT OF WATER-CUT ON THE CORROSION BEHAVIOUR LS0 CARBON STEEL UNDER DOWNHOLE CONDITIONS

Picture for 00061 THE EFFECT OF WATER-CUT ON THE CORROSION
Available for download
Product Number: 51300-00061-SG
ISBN: 00061 2000 CP
Author: J. A. Carew, A. AI-Sayegh and A. AI-Hashem
Industry: Oil and Gas Production
$0.00
$20.00
$20.00
An investigation was carried out to determine the corrosion behavior of carbon steel L80 in different waters produced in local crude oil under specific downhole conditions. Results indicated that the corrosion rate of this alloy remains within acceptable level when the water-cut was below 30%. However, the corrosion rate of the alloy started to increase gradually between 30 to 40% water-cut. This corrosion rate increased sharply when the water-cut surpassed 40% and reached a maximum at 100% water-cut. It was recommended that a corrosion inhibitor ought to be used when the water-cut exceeds 30% to maintain the integrity of this alloy under operating conditions. Keywords: Corrosion, water-cut, downhole, L 80 carbon steel, produced water.
An investigation was carried out to determine the corrosion behavior of carbon steel L80 in different waters produced in local crude oil under specific downhole conditions. Results indicated that the corrosion rate of this alloy remains within acceptable level when the water-cut was below 30%. However, the corrosion rate of the alloy started to increase gradually between 30 to 40% water-cut. This corrosion rate increased sharply when the water-cut surpassed 40% and reached a maximum at 100% water-cut. It was recommended that a corrosion inhibitor ought to be used when the water-cut exceeds 30% to maintain the integrity of this alloy under operating conditions. Keywords: Corrosion, water-cut, downhole, L 80 carbon steel, produced water.
PRICE BREAKS - The more you buy, the more you save
Quantity
1+
5+
Price
$20.00
$20.00
Product tags
Also Purchased
Picture for 00005 PROTECTIVE PROPERTIES OF CRUDE OILS
Available for download

00005 PROTECTIVE PROPERTIES OF CRUDE OILS IN CO2 AND H2S CORROSION

Product Number: 51300-00005-SG
ISBN: 00005 2000 CP
Author: Marta Castillo, Hern~in Rincon, Simona Duplat, Jose Vera, Evaristo Baron
$20.00
Picture for 00011 USE OF INTERNAL IMPRESSED CURRENT CATHODIC
Available for download

00011 USE OF INTERNAL IMPRESSED CURRENT CATHODIC PROTECTION SYSTEMS FOR CO2 CORROSION CONTROL IN OFFSHORE SEPARATORS

Product Number: 51300-00011-SG
ISBN: 00011 2000 CP
Author: Gareth John and Trevor Rosbrook, John Robinson, lan Munro
$20.00

Due to failure of internal coatings in the high pressure and test separators on offshore production facilities, the option to install an internal cathodic protection system was considered.
Picture for 00009 REPORT OF A COATING FAILURE ON A 16-INCH
Available for download

00009 REPORT OF A COATING FAILURE ON A 16-INCH OIL PIPELINE UNDER WET CO2 SERVICE

Product Number: 51300-00009-SG
ISBN: 00009 2000 CP
Author: Klaus E. Kueter and David E. Hendrix
$20.00
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support