AMPP Store - Products tagged with 'sucker rods'

Available for download

Development of Sucker Rods for Aggressive Environments

Product Number: 51317--8944-SG

ISBN: 8944 2017 CP

Author: Martin Buhler

Publication Date: 2017

$20.00

A Cr-Mo-B-Ti low alloyed steel, with a special quenched and tempered heat treatment, was designed. Corrosion fatigue resistance of the new material was evaluated at lab scale. Field tests are being carried out in 26 wells where sucker rods had failed for years.

Available for download

Fracture Failure Analysis of Type HL Sucker Rod in H2S-CO2 Environment

Product Number: 51320-14649-SG

Author: Jiangjiang Zhang, Zhiwen Yang, Wenguang Zeng, Dapeng Li, Yujie Guo, Xiuyun Wang, Qiuying Gao, Lei Zhang

Publication Date: 2020

$20.00

Recently, there have been several cracking failures of type HL carbon steel sucker rods with evidence of fatigue striation. In order to find out the reason for the fracture failure, the fracture morphology, material properties, loading and corrosion product of the failed type HL 35CrMoA sucker rod were analyzed, combined with the corrosion environment. The results show that the material properties of the failed 35CrMoA sucker rod meet the GB/T 26075-2010 standard requirements. Also the result of loading analysis shows that the loading is far from the fatigue limit stress. The type HL sucker rod’s yield strength is almost 1049 MPa and hardness is 35.2 HRC. In addition, the low in-situ pH and high H2S-CO2 partial pressure places the sucker rods in the Region 3 of sulfide stress corrosion cracking, which means the quenched and tempered sucker rod’s yield strength should not exceed 863 MPa and hardness should not exceed 30 HRC, according to the ISO 15156-2:2015 standard. It is concluded that the high hardness level of the type HL sucker rod led to sulfide stress corrosion cracking in the high H2S-CO2 partial pressure and low in-situ pH condition.

Available for download

Investigation of the Corrosion Performance of Stainless Steel and Low Alloy Steel Sucker Rod Materials in Aggressive Environments

Product Number: 51320-14321-SG

Author: Aleksey Shakhmatov, Oscar Martinez, Robert Badrak, Sergey Kolesov, Rodrigo Barreto, William Howie

Publication Date: 2020

$20.00

The corrosion resistance of sucker rod materials can be a significant concern, especially in aggressive service environments with high acid gas concentrations. Corrosion-related failures have been associated with increased levels of produced hydrogen sulfide (H2S) and carbon dioxide (CO2). The presence of corrosion damage, which is characterized by local material dissolution and pitting formation under the influence of CO2 and/or H2S, provides the initiation sites in a fatigue cracking mechanism. The fatigue crack propagation in corrosion aggressive environments is associated with the following factors: (1) local tensile stress concentration at crack tip, and (2) local corrosion dissolution. Therefore, using a material that tends to re-passivate as it interacts with the environment would be the optimum solution in order to mitigate the likelihood of field failures and reduce overall operating costs. Regarding passive film disruption processes abrasion and high temperature influences were not considered at this stage of the present study and repassivation kinetics were not measured. Conventional sucker rod production processes include normalize and temper (N&T) or quench and temper (Q&T) heat treatments to meet desired strength levels of low alloy steels. In order to enhance the corrosion properties and provide a resistant sucker rod solution, 13Cr martensitic stainless steel may provide a viable alternative to low alloys steels. This paper focuses on the characterization of 13Cr sucker rod material by comparing the general corrosion and corrosion fatigue performance with low-alloy steels.

Available for download

MR0174-1988, Recommendations for Selecting Inhibitors for Use as Sucker Rod Thread Lubricants

Product Number: 53017-HD1988

Author: NACE

Publication Date: 1988

$179.00

Control of down-hole corrosion in and around sucker rod threads. Selection of lubricant and use of corrosion inhibitors against the effects of corrosive well fluids. Historical Document 1988

Available for download

MR0174-2007-SG, Selecting Inhibitors for Use as Sucker-Rod Thread Lubricants

Product Number: 21300-SG

ISBN: 1-57590-120-X

Publication Date: 2007

$109.00

Corrosion inhibitors to provide protection of sucker-rod threads and box cavities against corrosive well fluids and to protect the threads from galling. Inhibited lubricants and tests to select.

Available for download

MR0174-HD1995-SG Selecting Inhibitors for Use as Sucker-Rod Thread Lubricants-HD1995

Product Number: 21300-HD1995

Author: NACE

Publication Date: 1995

$179.00

Corrosion inhibitors to provide protection of sucker-rod threads and box cavities against corrosive well fluids and to protect the threads from galling. Inhibited lubricants and tests to select. Historical Document 1995

Available for download

MR-01-74-HD1995-SG, Recommendations for Selecting Inhibitors for Use as Sucker Rod Thread Lubricants

Product Number: MR-01-HD1974

Author: NACE International

Publication Date: 1995

$179.00

This standard defines requirements for inhibited lubricants and suggests types of tests. Simulated sweet, sour, aerated, or combination environments with simulated or actual field fluids. Historical Document 1995

Available for download

MR0176-2012 Metallic Materials for Sucker-Rod Pumps for Corrosive Oilfield Environments

Product Number: 21303-SG

ISBN: 1-57590-099-8

Publication Date: 2012

$179.00

HISTORICAL DOCUMENT. Metallic material requirements for sucker-rod pumps in oilfield environments. Recommended materials for mild, moderate, and severe metal-loss corrosion. Properties of pump barrel and plunger materials.

Available for download

NACE MR0176-HD1976-SG Metallic Materials for Sucker Rod Pumps for Hydrogen Sulfide Environments-HD1976

Product Number: 21303-HD1976

$179.00

Supplement API Standard 11AX (6th ed., 1971) specifying the material requirements of metallic materials for the construction of sucker-rod pumps for service in hydrogen sulfide environments. Only pumps with one-piece barrels and metal plungers have been considered in this standard.

Available for download

RP0195-1995 Recommended Practice for Corrosion Control of Sucker Rods by Chemical Treatment-HD1995

Product Number: 21069-HD1995

Author: NACE International

Publication Date: 1995

$179.00

Corrosion inhibition, wear reduction, and corrosion prevention techniques for use from the manufacturing of bare steel sucker rods and couplings through installation and service in the well. Historical document 1995

Available for download

SP0195-2017 (formerly RP0195), Corrosion Control of Sucker Rods by Chemical Treatment

Product Number: 21069-SG

ISBN: 1-57590-122-6

Publication Date: 2017

$109.00

Corrosion inhibition, wear reduction & corrosion prevention of bare steel sucker rods and couplings through manufacture, installation & service. Corrosion control for atmospheric and downhole environments.

Available for download

Sucker Rod Materials - Metallurgical Quality Evaluation And Its Influence On General Corrosion Resistance

Product Number: 51321-16733-SG

Author: Aleksey Shakhmatov; William Howie; Oscar Martinez; Robert Badrak; Rodrigo Barreto

Publication Date: 2021

$20.00

Products tagged with 'sucker rods'

Association for Materials Protection and Performance