AMPP Store - Products tagged with 'test methods'

Available for download

Extending the Function of Concrete as a Cladding Material

Product Number: 41207-299-SG

Author: Lorella Angelini

Publication Date: 2007

$20.00

“Tilt-up" is a state-of-the-art building system in which steel reinforced concrete panels are cast on site and tilted up into their final position. The tilt-up panels are load bearing and also function as cladding elements. With the exceptions of integrally colored concrete, tilt-up concrete panels can look bare and unattractive if a finish is not applied. It is also well known that concrete is not a “perfect” material as it shows porosity and micro-cracks which can lead to deterioration over time.

Available for download

Fouling, Corrosion, And Wear Protection Of Power Take Off Rods For Wave Energy Conversion - Laser Cladding And Scraping

Product Number: 51322-17891-SG

Author: Johan B. Lindén, Kjell-Åke Andersson, Ross Harnden, Antoine Bonel, Gonçalo Fonseca, Pedro Almeida Vinagre, Emiliano Pinori

Publication Date: 2022

$20.00

Harvesting ocean energy will play an important role in supplying fossil-free energy for future generations. The oceanic environments around the world are unfortunately of the toughest possible to operate in. Most technologies use a power take-off (PTO) unit with mechanisms that are placed inside protective enclosures or sealed buoys to protect from the harsh environment in seawater. This gives a barrier from the corrosive electrolyte and biological activity that can deteriorate the components. The energy from the oceans in form of relative movements and forces are transferred to the PTOs with help from complex dynamic sealing systems.

Available for download

Further Advances In Paperless QA For Coatings Inspection

Product Number: 41211-604-SG

Author: JF Fletcher

Publication Date: 2011

$20.00

It is often said that inspection processes save money but that inspection reports cost money. The automation of inspection processes is an important cost saving that also leads to more time being allocated to the important task of inspection. There have been recent developments in both software and gauge design, which together make paperless quality assurance a reality for all protective and industrial coating applications.

Available for download

Ice-Phobic Coatings for Wind Tower Blades and Structures

Product Number: 41213-794-SG

Author: Rob Thomaier

Publication Date: 2013

$20.00

Ice build-up on wind power blades can affect efficiency by reducing the aerodynamics of the blades. The sudden release of ice through centripetal force can result in dangerous projectiles in the large chunks of released ice.

Industrial Coating Application (ICA) Module 3: Surface Preparation_ALL

Product Number: ICA_Mod 3

$450.00

Purchase of this course includes a one-year subscription and is non-refundable. Students will have access to all course materials for a period of one year from the date of registration. All course work must be completed during this time period. Extensions or transfers cannot be granted.

Before industrial coatings are applied, critical testing must be performed during surface preparation to ensure the coatings’ designed lifecycle will be maximized. This e-Course contains 13 modules and reviews methods of surface preparation equipment, methods, and standards.

Length: 13 Hours

Exam: Upon successful completion of the end of module assessment, students will receive a printable certificate of completion and 13 PDHs.

Available for download

Introductory Handbook for NACE MR0175/ISO 15156 (E-book)

Product Number: 37607-E

ISBN: 978-1-57590-320-0

Author: Derek Milliams

Publication Date: 2016

$59.00

ANSI/NACE MR0175/ISO 15156 standard in context of the corrosion science and the forms of cracking that led to its development. Usage. User Support. Documents. Laboratory tests to confirm cracking resistance of materials in O & G environments. 2016 NACE E-BOOK

Available for download

It’s All About Adhesion

Product Number: 51216-016-SG

Author: Guerman Vainblat, Timur Kolchinskiy

Publication Date: 2016

$20.00

A long-term project such as the current Brooklyn Bridge Rehabilitation Program, known as Brooklyn Bridge Contract 6, presents a great opportunity to collect vast amounts of data and records relating to the total coating replacement on a historic landmark. On any project, especially one of this scope, the project team has to deal with many obstacles, both expected and unexpected, and significant unknowns.

Available for download

Laboratory And Full-Scale Qualification Of An Abrasion Resistant Overcoat Wrap

Product Number: 51322-17633-SG

Author: David B. Futch, Tré Bischof, David D’Ambrosio, Chris Alexander

Publication Date: 2022

$20.00

As onshore pipeline rights-of-way become more congested and urban sprawl increases, the number of horizontal directional drills (HDDs) will likely increase. HDD is a trenchless pipeline installation method that requires drilling a larger pilot hole where the mainline pipe can be subsequently pulled through the drilled hole. However, HDDs have an increased probability for coating damage, even when coated with traditional mill or field applied abrasion resistant overcoat (ARO). This coating damage includes abrasion, impact, gouging, denting, tearing, bending, etc. and that damage may exist for the life of the pipeline due to an HDD being inaccessible for future maintenance.

Available for download

Laboratory Investigations into the Edge Protection of Organic Coatings

Product Number: 41210-555-SG

Author: Sascha Buchbach, Andreas W. Momber

Publication Date: 2010

$20.00

The presentation reports about a nationally funded 3-year R&D project on the effects of edge geometry and coating type on the corrosion protection performance of organic coatings on edges with particular attention to ballast water tank applications. Core of the presentation is the description of the testing scenarios, the introduction of three assessment methods, and the discussion of the results. Testing methods included the long-term testing of samples in a specially designed IMO chamber, the utilization of electric impedance spectroscopy and DFT measurements on polished cross sections of coated edges.

Available for download

Magnesium Special Issue - Corrosion Journal (digital) February 2021

Product Number: 32142-351-SG

ISBN: 1938-159X

Author: Geraint Williams / Joey Kish / T.W. Cain / C.F. Glover / J.S. Laird / N. Birbilis / J.R. Scully / R.L. Liu / E.A. McNally / S. Mahboubi / J.R. McDermid / H.N. McMurray / Michele Curioni / Meng Lyu / Andrea Cioncolini / Fabio Scenini / Christos Kousis / Patrick Keil / Ronald N. Clark / James Humpage / Robert Burrows / Hugh Godfrey / Mustufa Sagir / S.H. Salleh / Z.R. Zeng / M. Musameh / K. Venkatesan / S. Thomas / B. Zaghloul / C. Feiler / D. Mei / B.J.C. Luthringer-Feyerabend / S.V. Lamaka / M.L. Zheludkevich / Michael Höhlinger / Mark Bruns / Lukas Dahlem / Sannakaisa Virtanen / Jun-Lan Wang / Ming-Shi Song / Karla G. Contreras / Ivan Cole / Xiao-Bo Chen / Mohammad Umar Farooq Khan / Taban Larimian / T. Borkar / R.K. Gupta / M. Shahabi-Navid / M. Halvarsson / J.E. Svensson / A. Allanore / L.G. Johansson / M. Esmaily

Publication Date: 2021

$150.00

CORROSION journal's February 2021 special issue provides readers with the current trends in magensium corrosion research. This single download contains all articles from the issue and explores topics such as novel alloying additions, novel experimental methods and techniques, biomedical applications, atmospheric corrosion, and more.

Available for download

Major keys to Cost Effective Surface Preparation for Superior Coating Performance Corrosion Protection and Long Service Life

Product Number: 41209-505-SG

Author: Hugh J Roper, Joseph Brandon

Publication Date: 2009

$20.00

This presentation will outline the results and conclusions of a number of years of testing and experience in surface preparation for high-performance coatings. Testing has shown that there are a number of important surface preparation variables that are not routinely monitored and controlled on coating projects. These variables will be identified and guidance will be provided on appropriate treatment to achieve coating results.

Available for download

Measurement of Internal Coating Stresses of MIL-PRF-23377 Top Coated with MIL-PRF-8528

Product Number: 41215-884-SG

Author: Devin Clark, Richard C. Ferguson, James W. Rawlins

Publication Date: 2015

$20.00

Internal coatings stress (ICS) develops in coatings applied to a rigid substrates. During drying, volume changes due to solvent loss and/or cure induces stresses in the films. Differences in the thermal expansion coefficients of the coating and substrate also affect the ICS. ICS affects the interfacial adhesion and results in delamination once the stress exceeds the force of adhesion.

Products tagged with 'test methods'

Association for Materials Protection and Performance