AMPP Store - Products tagged with 'Developed by STG 44 - Marine Corrosion: Ships and Structures'

Available for download

ANSI/NACE SP0508-2017, Methods of Validating Equivalence to ISO 8502-9 on Measurement of the Levels of Soluble Salts

Product Number: 21134-SG

ISBN: 1-57590-222-2

Publication Date: 2017

$109.00

The Bresle patch method is defined by ISO 8502-9. This standard establishes the equivalence of other methods for measuring the level of contamination of salts to results of that same Bresle patch method.

Available for download

SP0111-2019, “Coating Technical File in Accordance with the IMO Performance Standard for Protective Coatings”

Product Number: 21153-SG

ISBN: 1-57590-245-1

Publication Date: 2019

$109.00

Maintaining the coating technical file (CTF) for ships to comply with the International Maritime Organization(IMO)’s “Performance Standard for Protective Coatings” (PSPC). File formats - electronic and paper.

Available for download

SP21421-2017 Pictorial Standard for underwater Evaluation of Fouling Degree on Ship Hulls

Product Number: 21421-SG

ISBN: 1-57590-379-2

Publication Date: 2017

$109.00

One of the key factors affecting ship performance, particularly fuel consumption and associated GHG (Green House Gas) emissions, is the degree of biofouling on the immersed hull and propeller(s). Rates of biofouling accumulation vary considerably, depending on the suitability, age and physical condition of the coating system(s) applied to the hull, the voyaging, anchoring and lay up patterns of the ship, and the geographical regions where these take place.

Available for download

TM0112-2018-SG, Test to Determine the Potential Corrosion Effects of Ballast Water Treatment Systems on Ballast Tanks Coating and Other Materials

Product Number: 21258-SG

ISBN: 1-57590-254-0

Publication Date: 2018

$109.00

Ballast water carried by ships keeps them upright during loading and offloading operations and provides balance, stability, and trim during sailing. Because ballast water is loaded from the surrounding port or coastal waters, organisms in the ballast water sometimes establish populations resulting in biological invasions, which may have severe ecological or economic impacts. This standard is designed to test the effect of long-term accelerated exposure of treated water on coating systems.

Products tagged with 'Developed by STG 44 - Marine Corrosion: Ships and Structures'

ANSI/NACE SP0508-2017, Methods of Validating Equivalence to ISO 8502-9 on Measurement of the Levels of Soluble Salts

SP0111-2019, “Coating Technical File in Accordance with the IMO Performance Standard for Protective Coatings”

SP21421-2017 Pictorial Standard for underwater Evaluation of Fouling Degree on Ship Hulls

TM0112-2018-SG, Test to Determine the Potential Corrosion Effects of Ballast Water Treatment Systems on Ballast Tanks Coating and Other Materials

Association for Materials Protection and Performance