AMPP Store - Products tagged with 'external'

Available for download

Corrosion Risk Assessment for Reinjection of Aerated Condensate

Product Number: 51323-19023-SG

Author: Sigit Prabowo, Kelly Melia, Alice Young, Aimee Calibugan, Keith Lichti, Farrell Siega

Publication Date: 2023

$20.00

Nga Awa Purua geothermal power station (NAP) operates a conventional direct contact condenser with recirculating cooling water and forced air cooling towers. The power station is located at the Rotokawa Geothermal field, near Taupō in the North Island of New Zealand. The field supports two power stations: NAP, which was commissioned in 2010 with an installed capacity of 140 MW; and Rotokawa I, a binary power plant which has been in operation since 1997.

Available for download

External Chloride Stress Corrosion Cracking (Cl-SCC) of Valve Bonnet 304 Austenitic Stainless Steel Stud Bolts

Product Number: 51324-21176-SG

Author: Iyad Al-Buraiki; Mohammed Abu Alsaud; Yousif AlRabie

Publication Date: 2024

$40.00

Chloride stress corrosion cracking (Cl-SCC) is known to occur in austenitic stainless steels operating at temperatures above 60 °C (150 °F). This paper, however, will discuss external Cl-SCC failures that occurred at ambient conditions. These failures occurred in stainless steel grade 304 bolts used as valve bonnet stud bolts. The failure caused total disengagement of the valve bonnet. These valves were located approximately 1 km from the seashore. In addition, the valves were located underneath a seawater deluge system used for fire protection which was periodically tested resulting in the valves being wetted by seawater. This paper provides details related to the materials, environmental conditions and mechanical properties of these bolts and provides recommendations to avoid such failures in the future.

Available for download

NACE SP0109-2019, Application of Tape Coatings for External Corrosion Protection of Buried Metal Pipelines

Product Number: 21143-SG

Publication Date: 2019

$179.00

HISTORICAL DOCUMENT. This Standard Practice provides the most current technology and industry practices for material requirements and the use of tape coatings for external mainline coating, coating repair, coating rehabilitation, and coating weld joints on buried metal pipelines.

Available for download

SP0109-2009 Field Application of Bonded Tape Coatings for External Repair, Rehabilitation, and Weld Joints on Buried Metal Pipelines

Product Number: 21143-2009

ISBN: 1-57590-234-6

Publication Date: 2009

$179.00

DOWNLOADABLE HISTORICAL DOCUMENT-Selection, application, and performance of bonded tape coatings as external corrosion protection for pipe, girth welds, and fittings. Inspection and tape coating damage repair.

Available for download

SP0109-2009-SG (Chinese), Field Application of Bonded Tape Coatings for External Repair, Rehabilitation, and Weld Joints on Buried Metal Pipelines

Product Number: 21150-SG

ISBN: 1-57590-234-6

Publication Date: 2009

$179.00

用于埋地金属管道外修补、修复和

补口的胶带防腐层现场施工的标准做法

Selection, application, and performance of bonded tape coatings as the external corrosion protection for pipe, girth welds, and fittings. Repair and rehabilitation.

Products tagged with 'external'

Corrosion Risk Assessment for Reinjection of Aerated Condensate

External Chloride Stress Corrosion Cracking (Cl-SCC) of Valve Bonnet 304 Austenitic Stainless Steel Stud Bolts

NACE SP0109-2019, Application of Tape Coatings for External Corrosion Protection of Buried Metal Pipelines

SP0109-2009 Field Application of Bonded Tape Coatings for External Repair, Rehabilitation, and Weld Joints on Buried Metal Pipelines

SP0109-2009-SG (Chinese), Field Application of Bonded Tape Coatings for External Repair, Rehabilitation, and Weld Joints on Buried Metal Pipelines

Association for Materials Protection and Performance