AMPP Store - Products tagged with 'verification'

Available for download

07132 In-Line Inspection Performance Verification

Product Number: 51300-07132-SG

ISBN: 07132 2007 CP

Author: Richard McNealy, Roger McCann, and Ming Gao

Publication Date: 2007

$20.00

Analytical methods for verification of assumed performance metrics, in terms of sizing are presented in this paper. The application of methods and criteria described in API 1163 for rejection and acceptance of assumed tool tolerance are discussed.

Available for download

A Novel and Practical Methodology for Gas Operators to Apply API Std 1163, In-Line Inspection (ILI) Systems Qualification Standard

Product Number: 51321-16500-SG

Author: Bernardo Cuervo/ Mark McQueen

Publication Date: 2021

$20.00

Available for download

Corrosion Under Insulation And Atmospheric Corrosion In The Refinery Industry. An Accurate Approach To Estimate Corrosion Growth Rates, A Texas Refinery Case Study

Product Number: 51322-17751-SG

Author: Bernardo Cuervo, Mark McQueen

Publication Date: 2022

$20.00

External corrosion in uninsulated pipelines is normally able to be prevented by cathodic protection (CP). Generally, external corrosion on buried pipelines cannot occur if CP current is getting onto the pipe. CP is an electrochemical means of corrosion control in which the oxidation reaction in a galvanic cell is concentrated at the anode and suppresses corrosion of the cathode (pipe) in the same cell. For instance, to make a pipeline a cathode, an anode is attached to it.

Available for download

Screening For Selective Seam Weld Corrosion and Long Seam Anomalies in ERW Pipe Using ILI Data. A Case Study

Product Number: 51323-19476-SG

Author: Bernardo Cuervo, Mark McQueen

Publication Date: 2023

$20.00

On July 8th, 1986, an 8-inch pipeline transporting gasoline ruptured in Mounds View, Minnesota. Vaporized gasoline combined with air and liquid gasoline flowed along neighborhood streets. Approximately 30 minutes later, a vehicle entered the area igniting the gasoline vapor.

Available for download

Update to SSPC-PA 9 Paint Application Specification

Product Number: 41216-945-SG

Author: David Beamish

Publication Date: 2016

$20.00

This paper discusses the revision of SSPC-PA 9, “Measurement of Dry Coating Thickness Using Ultrasonic Gages.” This standard describes procedures to measure the thickness of dry, homogeneous coatings applied to concrete, wood, wallboard, plastic, fiber and composite material using commercially available ultrasonic coating thickness gages.

Products tagged with 'verification'

07132 In-Line Inspection Performance Verification

A Novel and Practical Methodology for Gas Operators to Apply API Std 1163, In-Line Inspection (ILI) Systems Qualification Standard

Corrosion Under Insulation And Atmospheric Corrosion In The Refinery Industry. An Accurate Approach To Estimate Corrosion Growth Rates, A Texas Refinery Case Study

Screening For Selective Seam Weld Corrosion and Long Seam Anomalies in ERW Pipe Using ILI Data. A Case Study

Update to SSPC-PA 9 Paint Application Specification

Association for Materials Protection and Performance