AMPP Store - Products tagged with 'cavitation'

Available for download

51318-10871-Failure of Light Naphtha Discharge Pump in a 2-Stage Overhead System of Condensate Splitting Unit

Product Number: 51318-10871-SG

Author: Gyutae Park / Jinseok Seo / Majid Abbasi / Yunjo Ro

Publication Date: 2018

$20.00

Recently, a light naphtha discharge pump (made of UNS J91150 casing and impeller) malfunctioned, which caused severe damage to the impeller. Details of the failure analysis will be presented and discussed.

Available for download

Erosion Resistance Testing for Abrasion and Cavitation Resistant Coatings

Product Number: 41215-910-SG

Author: Hee-Baek Lee, Chung-Seo Park, Seong-Mo Son, Kyung-Jin Park, Sang-Sik Park**

Publication Date: 2015

$20.00

Cavitation erosion of the rudder has been a serious problem in the high-speed container ship industry. It is well known that the lifetime of a conventional coating system is about 6 months against cavitation bubble collapse. Although STS 316L stainless steel has been applied to prevent such a problem, there are several drawbacks such as high repair cost and poor workability.

Available for download

Forms of Corrosion: Recognition and Prevention, Second Edition (E-Book)

Product Number: 37626-E

ISBN: 978-1-57590-354-5

Author: Dale McIntyre

Publication Date: 2019

$215.00

The Second Edition of this classic handbook combines Volumes 1 and 2 of the First Edition into a single volume, adding updated commentary and many new case histories. Mechanisms and numerous case histories illustrate general, localized and galvanic corrosion, environmental cracking, erosion-corrosion, cavitation, fretting, intergranular attack, dealloying, and high-temperature corrosion.

This book presents detailed corrosion mechanisms and case histories of a wide variety of corrosion problems from chemical plants, oil production and refining, utilities, pipelines, transport by air, land, and sea, electronics, and the preservation of historical artifacts. The uses of advanced analytical techniques such as electron microscopy, metallography, energy-dispersive X-ray spectroscopy, Aüger spectroscopy and electrochemical techniques are presented to illustrate their utility in corrosion failure investigations.

Available for download

Forms of Corrosion-Recognition and Prevention: NACE Handbook 1, Volume 1 (e-Book)

Product Number: 37531-E

ISBN: 0915567873

Author: Edited by C.P. Dillon

Publication Date: 1982

$105.00

Case histories & illustrations of specific forms of corrosion. General, localized & galvanic corrosion, environmental cracking, erosion-corrosion, cavitation & fretting. Intergranular corrosion, dealloying & high-temperature corrosion. 1982 NACE

Available for download

Investigation of Polymeric Elastomers for Cavitation and Erosion Resistance

Product Number: 51323-18950-SG

Author: Allen Skaja, Christine Henderson

Publication Date: 2023

$20.00

Cavitation occurs in localized areas where there is a pressure drop across a structure; the water goes through a phase transition and forms water vapor. These vapor bubbles implode, resulting in high velocity micro-jets which impact adjacent surfaces. These impacts release shockwaves of energy, which cause microscopic particles of the surface material to flake off.1 Repeated micro-jet impact causes microfractures in the affected surfaces and leads to pitting.

Available for download

The Cavitation Corrosion Behaviour of a Cobalt-Based Alloy in Seawater

Product Number: 51324-21122-SG

Author: A. Al-Hashem

Publication Date: 2024

$40.00

An ultrasonically induced cavitation facility was used to study the cavitation corrosion behavior of cobalt-based alloy (UNS R30006) in seawater. The work included measurements of free corrosion potentials, and mass loss in presence and absence of cavitation. The cavitation tests were made at a frequency of 20 KHz and at temperatures of 250C. Cavitation conditions caused a noble shift in the free corrosion potential for cobalt-based alloys. Cavitation also increased the rate of mass loss of these alloys by several orders of magnitude with respect to stagnant conditions. Cavitation made the surface of this alloy very rough, exhibiting cavity pits in the middle region of the attacked area as revealed by the scanning electron microscope (SEM). Mechanical factors were determined to be the leading cause of metal loss.

Available for download

Ultrasonic Chemical Cleaning: Development Of Chemical Blends For Industrial Applications

Product Number: 51321-16747-SG

Author: Roxanne A. Shank; Russell Philion; Thomas R. McCartney

Publication Date: 2021

$20.00

Products tagged with 'cavitation'

51318-10871-Failure of Light Naphtha Discharge Pump in a 2-Stage Overhead System of Condensate Splitting Unit

Erosion Resistance Testing for Abrasion and Cavitation Resistant Coatings

Forms of Corrosion: Recognition and Prevention, Second Edition (E-Book)

Forms of Corrosion-Recognition and Prevention: NACE Handbook 1, Volume 1 (e-Book)

Investigation of Polymeric Elastomers for Cavitation and Erosion Resistance

The Cavitation Corrosion Behaviour of a Cobalt-Based Alloy in Seawater

Ultrasonic Chemical Cleaning: Development Of Chemical Blends For Industrial Applications

Association for Materials Protection and Performance