AMPP Store - Products tagged with 'wear'

Available for download

51316-6970-Development Of Spray-Applied Pipeline Erosion-Protective Epoxy Linings

Product Number: 51316-6970-SG

ISBN: 6970 2016 CP

Author: Osmay OHarriz

Publication Date: 2016

$20.00

This paper aims to present a novel class of pipeline protective lining materials that provide erosion-corrosion resistance combined with negligible wear to spray equipment. These coatings have been formulated with a blend of thermoplastic fillers rather than the traditional ceramic fillers used for erosion resistance.

Available for download

51316-7298-Application of Non-Metallic Materials in Oil Sands Operations

Product Number: 51316-7298-SG

ISBN: 7298 2016 CP

Author: John Wolodko

Publication Date: 2016

$20.00

Oil sands production has unique challenges in terms of materials selection and long-term performance. This paper provides a general overview of various oil sands recovery and upgrading processes, and outlines areas where polymers and composites could be effectively utilized. Case studies.

Available for download

51316-7323-Study of protection mechanism of multifunctional coating systems against internal corrosion in pipelines in oil and gas industry

Product Number: 51316-7323-SG

ISBN: 7323 2016 CP

Author: Nasser AlJassem

Publication Date: 2016

$20.00

Organic coating systems for protection against internal corrosion of pipelines are important to maintain integrity of oil and gas infrastructure. The present investigation focuses on evaluation of protective properties of a set of multiphase coating systems in the environment encountered inside of off-shore natural gas pipelines.

Available for download

51317--9636-Optimizing Composition Fabrication and Inspection of Chromium Carbide Overlay (CCO) for Oil Sands

Product Number: 51317--9636-SG

ISBN: 9636 2017 CP

Author: Duane Serate

Publication Date: 2017

$20.00

Lab tests, assessments and technical studies/literature reviews were done concerning common commercial Chromium Carbide Overlay (CCO) products to understand the effects of overlay composition and welding parameters on underbead cracking, mechanical properties, and wear/abrasion resistance.

Available for download

51317--9637-Non-Metallic Liners for Dense Slurry (Oil Sands) Applications

Product Number: 51317--9637-SG

ISBN: 9637 2017 CP

Author: Duane Serate

Publication Date: 2017

$20.00

This paper summarizes the experimental findings, discusses the effects of a typical bitumen-water slurry solution on the wear performance of polyurethanes and neoprenes and proposes a mathematical relationship between Coriolis (low stress, low angle abrasion & scouring) wear to the relevant physical properties in the virgin state of polyurethanes and neoprenes.

Available for download

Importance Of Quality Control Of Wear Resistant Overlays In Oil Sands Production Operations.

Product Number: 51322-17838-SG

Author: Satya Kompally, Jeff Liu

Publication Date: 2022

$20.00

Canadian Oil Sands mining operations have been producing oil from sand ore from the early 1960s. Oil Sands mainly consists of high hardness quartz, silica, bitumen and water. Bitumen production processes include mining the sand, washing it with hot water, slurry transportation, tailing disposal and bitumen production. Abrasion, gouging wear, impact wear, erosion and erosion-corrosion are predominant degradation mechanisms in Oil Sand mining operations.

Available for download

New Thermal Management Raw Materials Platform Gives Flexibility to Develop Next Generation Thermal Insulation Coatings (TIC) with Improved Performance

Product Number: 51324-20913-SG

Author: Gary Fisher

Publication Date: 2024

$40.00

Coating industry trends has driven increased use and interest to develop more efficient and durable thermal insulative coatings. The key areas for this expansion are to reduce corrosion under insulation, increase occupational safety and reduce energy loss. Key features of these water-based coatings are low thermal conductivity, high hydrophobicity and adhesion along with an emerging interest to have greater heat resistance and stability. This paper will introduce a new water-based silicone hybrid resin to accompany the two novel microporous composite granules; one with high thermal insulative efficiency and the other, a pure hydrophobic synthetic silica pearl shaped filler to optimize thermal insulation efficiency as well as offering mechanical stability and reduced cracking in these highly filled coatings. The new platform offers the formulator options to leverage all new technologies together or separately when a compatible binder is needed to increase thermal heat stability and flame-retardant performance. Coatings and formulating details will be highlighted with thermal degradation of binders, surface temperature comparison for “Safe Touch” coatings, thermal conductivity (Lambda - mW/mK), contact angle measurements along with fire retardance test and direct flame testing using various thermal insulation fillers.

Available for download

Non-metallic Slurry Pipelines in Oil Sands - Challenges and Potential Solutions

Product Number: 51323-19483-SG

Author: Soon W. Moon, Mark Schaffer, Muaaz Syed, Michael Romanow, Robert Rong

Publication Date: 2023

$20.00

Syncrude is one of the largest operators in Canada’s oil sands industry, with an over 55-year history of innovation. Based in Fort McMurray, AB, Canada and with a large research and development (R&D) facility in Edmonton, AB, Canada, this joint venture company operated by Suncor Energy Inc. has pioneered many of the processes used in the industry. The production process starts with oil sands surface mining using shovels and trucks, followed by a crushing and screening process.

Available for download

Novel Composite Overlay for High Temperature Corrosive/Wear Applications

Product Number: 51324-20925-SG

Author: Gary Fisher

Publication Date: 2024

$40.00

Synergistic erosion and corrosion at elevated temperatures is a prevalent condition in oil refining and power generation. Corrosion resistant alloys do not tend to be durable under wear conditions, whilst common wear-resistant solutions such as tungsten carbide-based coatings display poor resistance to oxidation and corrosion. This work details the development of a composite overlay, deposited by plasma transferred arc welding, that has been designed to exhibit high levels of wear protection coupled with resistance to oxidizing and carburizing environments. The performance of the composite is provided by the corrosion resistance of a MCrAlX-type alloy, which acts as a matrix for a homogenous distribution of chromium-based carbides. The protective oxide promoted by the matrix alloy, combined with a dense population of in-situ formed primary carbides act synergistically to provide resistance to high temperature corrosive/wear environments. The presentation details the alloy selection and development of the deposition process. The performance of the composite is assessed under abrasive wear, oxidizing and carburizing conditions, and gauged against commonly used corrosion resistant alloys.

Products tagged with 'wear'

Association for Materials Protection and Performance