Menu
Search
Filters
Close
Menu

Products tagged with 'protective coatings'

View as
Sort by
Display per page
Picture for Evaluating Cost-Effectiveness of Water Infrastructure Corrosion Control Methods
Available for download

51318-11230-Evaluating Cost-Effectiveness of Water Infrastructure Corrosion Control Methods

Product Number: 51318-11230-SG
Author: Jessica D. Torrey / Todd Gaston / Bobbi Jo E. Merten c
Publication Date: 2018
$20.00

This paper demonstrates a spreadsheet tool developed to evaluate life-cycle costs for specific cases using economic principles and professionally developed cost estimates.
A High Volume Production Multi-Use Polyurea Protective Coating
Available for download

A High Volume Production Multi-Use Polyurea Protective Coating

Product Number: 41206-221-SG
Author: Dan M. Bratys
Publication Date: 2006
$20.00

While sprayable bedliners have been available for numerous years in the aftermarket, it has only been with the introduction of two component polyurea bedliner coating at Nissan-Canton, that a bedliner could be applied successfully in a high-volume production atmosphere
An innovative thermoplastic coating for CUI applications
Available for download

An Innovative Thermoplastic Coating For CUI Applications

Product Number: 51322-18122-SG
Author: Hindrik Harm Broesder
Publication Date: 2022
$20.00

An innovative thermoplastic type of coating material based on pure isobutene homopolymer was investigated to determine whether it would be fit for purpose in CUI services at low and moderate temperatures up to 120 °C. This polymer is commonly called Polyisobutene (PIB) and has a unique set of properties that are beneficial for protecting metallic structures from corrosion. Polyisobutene is a polyolefin with a chemical structure similar to Polyethylene (PE) and Polypropylene (PP). One of the major differences is that PE and PP are solid materials with a high degree of crystallinity, whereas PIB does not have a crystallization or melting temperature. PIB has a glass transition temperature (Tg) below – 60 °C which indicates that the polymer is a liquid above this temperature.
MR0175/ANSI 15156
Available for download

ANSI/NACE MR0175/ISO 15156-2009

Product Number: 21307-HD2009
Publication Date: 2009
$400.00

2009 EDITION - HISTORICAL DOCUMENT.

Selection and qualification of carbon and low-alloy steels, corrosion-resistant alloys, and other alloys for service in oil and natural gas production and treatment plants with H2S-containing environments.
Picture for ANSI/NACE MR0175/ISO 15156 (Chinese Version)

ANSI/NACE MR0175/ISO 15156-2009 (Chinese), Petroleum and Natural Gas Industries—Materials for Use in H2S-Containing Environments in Oil and Gas Production

Product Number: 21310-SG
ISBN: 1-57590-176-5
Publication Date: 2009
$310.00

CHINESE TRANSLATION. Selection and qualification of carbon and alloy steels for service in oil and natural gas production & treatment in H2S-containing environments.  Multiple downloadable files. 
 
Picture of ANSI/NACE MR0175/ISO 15156-2015

ANSI/NACE MR0175/ISO 15156-2015

Product Number: 21307-SG
ISBN: MR0175/ISO15156
Publication Date: 2015
$255.00

HISTORICAL DOWNLOADABLE 2015 EDITION.

Selection and qualification of carbon and low-alloy steels, corrosion-resistant alloys, and other alloys for service in equipment in oil and natural gas production and NG treatment plants in H2S-containing
Picture for ANSI/NACE MR0175-2021/ISO 15156:2020

ANSI/NACE MR0175-2021/ISO 15156:2020

Product Number: ANSI-NACE MR0175-2021
Publication Date: 2021
$495.00

Note: This document was originally published with errors in Table A.16, page 3-32. These identified errors are corrected. Errata sheet is included.

 

NACE MR0175/ISO 15156 gives requirements and recommendations for the selection and qualification of carbon and low-alloy steels, corrosion-resistant alloys, and other alloys for service in equipment used in oil and natural gas production and natural gas treatment plants in H2S-containing environments, whose failure could pose a risk to the health and safety of the public and personnel or to the equipment itself.
Assessment and Rehabilitation of Piping Inside Water and Wastewater Treatment Plants
Available for download

Assessment And Rehabilitation Of Piping Inside Water And Wastewater Treatment Plants

Product Number: 51322-18200-SG
Author: Manuel Najar
Publication Date: 2022
$20.00

Many pipelines within water and wastewater treatment plants that were constructed within the last 50 years are nearing the end of their service lives. Owners have invested in condition assessments to help them make the difficult decision to repair or replace these pipelines. 
Benjamin Franklin Bridge Painting Project
Available for download

Benjamin Franklin Bridge Painting Project

Product Number: 41206-262-SG
Author: Vijay R. Pandya, Kenneth A. Trimber, Louis G. Lyras
Publication Date: 2006
$20.00

This paper identifies the unique steps taken to safely remove lead-based paint from a major highway/commuter railroad bridge connecting   Philadelphia, Pennsylvania with Camden, New Jersey, followed by the application of a new long lasting protective coating system. The paper addresses project phasing by the owner and coordination with the commuter train to keep costs down and to minimize inconvenience to the public. 
Picture for Case Study: Foreign Operator DC Interference On An Existing Pipeline Systems
Available for download

Case Study: Foreign Operator DC Interference On An Existing Pipeline Systems

Product Number: 51322-17587-SG
Author: Jessica Jaskolka
Publication Date: 2022
$20.00

EN Engineering (ENE) completed an AC interference study over 68 miles of an operator’s transmission line. In addition, an ACVG survey of approximately one (1) mile of the pipeline was conducted at the take-off point of the 8” line. As a result of this AC interference study, evidence of elevated AC corrosion risk has not been found on the operator’s pipeline. However, a review of the provided data shows evidence of DC interference due to a nearby foreign rectifier groundbed at the take-off point of the operator’s line.
Picture for Challenges and Insights behind Qualifying a Protective Coating as a Corrosion under Insulation Preventive Coating
Available for download

Challenges and Insights behind Qualifying a Protective Coating as a Corrosion under Insulation Preventive Coating

Product Number: 51324-20774-SG
Author: Jenny Natalie Manvik; Anders W. B. Skilbred; Sondre Volden; Svein Jacob Kaspersen
Publication Date: 2024
$40.00
Corrosion under insulation (CUI) poses a severe threat to many industries operating at elevated temperatures. One of the most used and most cost-effective methods to mitigate and prevent CUI is by the use of organic coatings. In the last decades the importance of CUI-preventive coatings has increased greatly, and standards for testing these coatings have been published and discussed. At the end of 2018 the ISO 19277 standard was published, forming the first internationally accepted standard for testing and qualifying coating systems for CUI protection. Over the last years an extensive amount of testing has been performed to test and qualify coating systems, but also to provide insight and knowledge about the correlations and differences between various CUI test methods. In this paper, we will present a variety of test results to show how complex it is to qualify coatings to prevent CUI occurring. How do we use the library of results we now have? What does it tell us about real life? Do the various standards give the same conclusions based on the results? Some questions will be answered, and some will be left open.
Picture for Coating Condition Surveys
Available for download

Coating Condition Surveys

Product Number: 51324-20828-SG
Author: Griffin Collins; Cortney Chalifoux
Publication Date: 2024
$40.00
A coating maintenance strategy for aging military infrastructure and utilities systems is vital for the long-term performance of the asset. Integrity maintenance plans can enhance risk mitigation and mitigate costly environmental impacts. No well-developed maintenance strategy is complete without the implementation of periodic coating inspection and assessments, collectively referred to as Coating Condition Surveys (CCS), guided by United Facilities Criteria (UFC) and United Facilities Guide Specifications (UFGS). Regularly scheduled CCSs provide key information that not only helps owners better understand their assets, but also help engineers, specifiers, coatings applicators, and inspectors better perform their roles in corrosion mitigation. Additionally, the information provided by a CCS aids owners in making budgeting decisions for maintenance, helps designers plan for future repairs and inspections, and provides coatings contractors a clear understanding of the repairs necessary to extend the service life of an asset. This discussion will outline methods involved in performing on-site inspections and highlight the necessity of on-site inspections in corrosion mitigation. While this discussion will focus on inspection and repair strategies for existing coatings on steel substrates, the strategies outlined can be applied to enhance maintenance strategies of all infrastructure subject to corrosion.
Categories
Industry
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support