AMPP Store - Products tagged with 'salt spray test'

Available for download

51316-7287-Phenomenal Pitting Corrosion on Coating Damaged Surface of Automobile Suspension Coil Springs

Product Number: 51316-7287-SG

ISBN: 7287 2016 CP

Author: Yugo Ashida

Publication Date: 2016

$20.00

This study focuses on a better understanding of significant pitting corrosion on coating surface damaged carbon steels, or low alloy steels, during salt spray testing for automotive applications. Anodic cyclic polarization test was used to evaluate the severity of pitting corrosion, and to estimate the corrosion rate of raw materials.

Available for download

51316-7304-Evaluation of Protective Coating Performance in a Cyclic-Temperature Environment

Product Number: 51316-7304-SG

ISBN: 7304 2016 CP

Author: Junki Miyashita

Publication Date: 2016

$20.00

Overview of coatings for a cyclic-temperature environment. Test method, including a heat cycle between 21 to 300 deg-C simulating the dehydrator operation and exposure to salt spray. The performances of the three coatings were evaluated using this method. Factors to be considered for coating selection in the cyclic-temperature environment are discussed.c

Available for download

51318-11068-What is the Optimum Protective Coating System for Cyclic-Temperature Service?

Product Number: 51318-11068-SG

Author: Naoki Tanuma

Publication Date: 2018

$20.00

In Oil and Gas plant facilities, protective coating system selection is important. Thermal Sprayed Aluminum and Inorganic Zinc Primer with Inert Multi-Polymeric Matrix are optimum protective coating system in severe conditions.

Available for download

Evaluations of Wetting and Dispersing Additives for Use in Waterborne AntiCorrosive Paints

Product Number: 51217-032-SG

Author: Martin Muth, Max Conrad “Hochschule Niederrhein”, Ronald Brashear

Publication Date: 2017

$20.00

Over the last few years, the protective coatings industry has seen an increased demand for high performance waterborne coatings in the field of corrosion protection. Market drivers such as “Sustainability”, “Greenability”, and ongoing regulatory and environmental concerns continue to force coatings producers to look for other viable options to replace conventional solvent borne technologies.

Available for download

Formulated Didecyl Dimethyl Ammonium Bicarbonate/Carbonate (DDABC), a Multi- Metal Corrosion Inhibitor with Relevance to Commercial Surface Preparation and Coatings Technologies

Product Number: 41207-306-SG

Author: Thomas C. Bedard, T. David Burleigh, Joseph Kimler

Publication Date: 2007

$20.00

A new water-soluble quaternary ammonium compound, didecyldimethylammonium bicarbonate/carbonate (DDABC), has been evaluated as a corrosion inhibitor via standard electrochemical tests on steel and shown to be highly effective. At the proper dilution, the inhibitor migrates to the metal/solution interface and forms a monomolecular film on the anodic sites.

Available for download

Study of Scribe Type on Accelerated Underfilm Corrosion Creep

Product Number: 41211-642-SG

Author: Carl W. Reed

Publication Date: 2011

$20.00

The creepage of corrosion underneath a coatings film applied to a steel test panel is often used as a performance test for the anti-corrosion properties of a coating system. Creepage is defined as the degree of corrosion (usually measured in mm) emanating away from a scribe line underneath a coating film applied to a steel substrate. There are several factors which may affect the degree of corrosion creep, one of which is the type and width of scribe cut into the coatings film to the steel substrate. There is a variety of scribing methods used in various test methods and specifications; however it is unclear if there is actually a performance difference observed in corrosion creep when using different scribe types.

Products tagged with 'salt spray test'

51316-7287-Phenomenal Pitting Corrosion on Coating Damaged Surface of Automobile Suspension Coil Springs

51316-7304-Evaluation of Protective Coating Performance in a Cyclic-Temperature Environment

51318-11068-What is the Optimum Protective Coating System for Cyclic-Temperature Service?

Evaluations of Wetting and Dispersing Additives for Use in Waterborne AntiCorrosive Paints

Formulated Didecyl Dimethyl Ammonium Bicarbonate/Carbonate (DDABC), a Multi- Metal Corrosion Inhibitor with Relevance to Commercial Surface Preparation and Coatings Technologies

Study of Scribe Type on Accelerated Underfilm Corrosion Creep

Association for Materials Protection and Performance