AMPP Store - Products tagged with 'fbe'

Available for download

11031 Advances in Damage Resistant Coating Technology

Product Number: 51300-11031-SG

ISBN: 2011 11031 CP

Author: Dr. Jennifer K. Pratt, Meghan Mallozzi and Dr. Andrew D’Souza

Publication Date: 2011

$20.00

Damage to coatings leads to higher potential corrosion sites on the metallic surface and could ultimately lead to a decrease in service life. This paper will present a novel coating system that incorporates both damage resistance and flexibility in a system that is not subject to cathodic shielding.

Available for download

51316-7024-High Temperature FBE Coating Disbondment in Multi-Layer PP Insulation Coatings

Product Number: 51316-7024-SG

ISBN: 7024 2016 CP

Author: Alex Garner

Publication Date: 2016

$20.00

Multi-layer polypropylene (MLPP) insulation coating is used for thermal insulation of subsea pipelines. However in recent years - with higher wellhead operating temperatures - high temperature (HT) Fusion Bonded Epoxies have been used. This paper describes the author's experience with the MLPP systems over the last 20 years.

Available for download

51318-10987-Development of low application temperature coating systems for steel pipelines

Product Number: 51318-10987-SG

Author: Dr Dennis Wong / Catherine Lam / Dr Peter Singh

Publication Date: 2018

$20.00

Coordinating with powder suppliers in the development of Low Application Temperature (LAT) FBE materials and the enhancement and process controls for the corresponding application process to constrain temperatures the steel pipe experiences in a coating plant.

Available for download

51318-11533-Blistering Mechanism of High Tg Temperature FBE Coatings

Product Number: 51318-11533-SG

Author: Sherry (Shan) Rao / Shaoguang Feng

Publication Date: 2018

$20.00

The objective of this study is to investigate blistering formation of high glass-transition- temperature (Tg) fusion bonded epoxy (FBE) coatings in an attempt to understand the blistering mechanism.

Available for download

Field Experience of Various Coating Systems in Oil & Gas Industry

Product Number: 51324-20360-SG

Author: Amjad Kharusi; Janardhan Rao Saithala; Mohammed Al Ghafri; Mohammed Ossama; Talal Nabhani

Publication Date: 2024

$40.00

Internal and external coatings have been used extensively for the corrosion protection of a wide range of process components such as flowlines, pipelines, piping, vessels, tanks etc. that are used in oil and gas industry. Coatings are a critical barrier as part of a corrosion management strategy and shall be capable of providing long term corrosion protection in corrosive environment. Coatings are exposed to wide range of temperatures, high pressure environments, and acid gases (H2S and CO2), and are subjected to mechanical damage, etc. during operating service life. The authors’ company has extensive experience of using various coating systems for over 40 years. Fusion bonded epoxy (FBE) coatings and glass reinforced epoxy (GRE) linings are primarily used as internal coatings, and three-layer polypropylene (3LPP), three-layer polyethylene (3LPE), thermal spray aluminum (TSA), and epoxy coatings are used as external coatings in hydrocarbon and water injection service. During design, it is anticipated that coatings will meet expected design life, however, premature coating failures are reoccurring for various reasons, which result in significant oil & gas deferment and unplanned shutdowns. This paper will present two case studies on field experience of different coating systems and contributing factors that led to premature failures. The three main contributing factors to premature failure are quality QA/QC during coating application, incorrect coating selection, and coating damage during installation.

Available for download

Investigation of the mechanisms and kinetic of cathodic disbondment in seawater and soils

Product Number: 51323-19258-SG

Author: Erwan Diler, Krystel Pelissier, Abdelkader Meroufel, Nicolas Larche

Publication Date: 2023

$20.00

Cathodic protection is used in addition to organic coatings to ensure the integrity of offshore and onshore buried structures against corrosion. The cathodic protection efficiency is usually ensured by keeping the potential of the structure to be protected in a narrow range following standard recommendations such as ISO 15589-1 and/or NF EN 12954. For onshore buried structures, this potential range is limited by the protection potential Ep and the limit potential El.

Available for download

Key Points Specifically For Transmission Pipeline Coating

Product Number: 51322-17760-SG

Author: Ron Raphoon

Publication Date: 2022

$20.00

The bulk of a pipeline coating is shop applied and those processes are typically automated. Because
the automation of pipeline coating has so many controls, there is little need to address the inspection on the body of the mainline coatings. As such, this paper will address inspection of pipeline specific coating types and their unique considerations in a field environment. It will address concerns around tie-ing into other coating types and compatibility.

Available for download

NACE SP0395-2022, Fusion-Bonded Epoxy Coating of Steel Reinforcing Bars

Product Number: NACE SP0395-2022

Publication Date: 2022

$109.00

This standard defines the requirements for fusion-bonded epoxy (FBE) powder coatings applied by electrostatic spray or other suitable method to deformed and plain steel reinforcing bars that are suitable for fabrication after coating. This standard includes requirements and guidelines for ordering, cleaning, coating, inspecting, handling, transporting, and installing the coated steel reinforcing bars.

Available for download

Pipeline Coating Corrosion, Understanding Testing and UV Degradation of Fusion Bonded Epoxy Coatings

Product Number: 51321-16325-SG

Author: Lake H. Barrett/Robert Leggat

Publication Date: 2021

$20.00

Available for download

Success Story: The Rolling Journey of Coatings Standards (2011 – 2021)

Product Number: MECC23-19869-SG

Author: Hassan S. Al-Sagour; Mana H. Al-Mansour

Publication Date: 2023

$20.00

Saudi Aramco coating standards have been holding a great status of prestige, not only in the Arabian Gulf area, but all around the world. Due to the size and significance of Saudi Aramco as one of the largest oil-and-gas producers in the world, the coating applications for its facilities had to follow suit. Yet, the coating standards were also interconnected with the coating industry, its limitations and old practices.

Products tagged with 'fbe'

Association for Materials Protection and Performance