Products tagged with 'crack growth'

View as

Sort by

Display per page

Available for download

51316-7183-Sour Service Fatigue and Fracture Behavior of High Strength Steels

Product Number: 51316-7183-SG

ISBN: 7183 2016 CP

Author: Thodla Ramgopal

Publication Date: 2016

$20.00

Fatigue Crack Growth Rate (FCGR) and fracture toughness behavior of high strength steels used in drilling riser applications was investigated in sour environments. Frequency scan tests were performed were performed on X80 C110 and S135 in moderate to mildly sour environments.

Available for download

51318-10963-Fatigue and Static Crack Growth Rate response of C110 under CP using a single specimen methodology

Product Number: 51318-10963-SG

Author: Ramgopal Thodla / Feng Gui / Ashwini Chandra

Publication Date: 2018

$20.00

Subsea flowlines and risers experience fatigue cycles due to thermal and/or pressure transients or vortex induced vibration (VIV). Tests were performed under constant stress intensity factor (K) levels, in a mildly sour environment and in seawater under cathodic protection to understand the difference in the CRG.

Available for download

Corrosion Fatigue Performance of Materials in Delayed Cokers and Coker Blowdown Piping System

Product Number: 51324-20618-SG

Author: Haixia Guo; Millar Iverson; Simon Yuen; Sudeep Bohra; Liu Cao

Publication Date: 2024

$40.00

Very often the current body of knowledge and literature of fatigue performance in coke drums and blowdown piping system are linked to fatigue testing performed in air or in water. This paper summarizes the test results that were conducted using process fluids collected from a delayed coker. Both fatigue crack growth rate (FCGR) tests and stress/strain – cycle fatigue endurance tests in sour water at 200°F (93°C) or in a hot oil mix at 460°F (238°C), with gas mixture containing H2S were conducted. Carbon steel, Alloy 625 and their corresponding weld metal specimens were tested. The test results indicate remarkable impact of environment on fatigue behavior. Frequency scanning FCGR tests in sour water environment showed that FCGR increased with decreasing load frequency, particularly with high ?K (32 ksi·vin or 35 MPa·vm ). When ?K was between 12 ksi·vin (13MPa·vm) and 36 ksi·vin (40 MPa·vm), FCGR of all specimens in sour water are higher than the mean + 2 SD (Standard Deviation) curve of carbon steel in air. Fatigue endurance tests in both sour water and hot oil environments showed various ranges of knock-down factors compared to test results in air. This testing program provides a better definition of the corrosion fatigue cracking mechanism of materials in delayed coker process. It also helps in the inspection planning of delayed coker equipment and in decisions on material selection.

Products tagged with 'crack growth'

51316-7183-Sour Service Fatigue and Fracture Behavior of High Strength Steels

51318-10963-Fatigue and Static Crack Growth Rate response of C110 under CP using a single specimen methodology

Corrosion Fatigue Performance of Materials in Delayed Cokers and Coker Blowdown Piping System

Association for Materials Protection and Performance