AMPP Store - Products tagged with 'standards collaboration'

Available for download

ANSI/NACE MR0103-2015/ISO 17945:2015 (R2023), Petroleum, petrochemical and natural gas industries — Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments

Product Number: ANSI-NACE MR0103-2023

Publication Date: 2023

$200.00

Establishes material requirements for resistance to SSC in sour petroleum refining and related processing environments containing H2S either as a gas or dissolved in an aqueous (liquid water) phase with or without the presence of hydrocarbon. This International Standard does not include and is not intended to include design specifications. Other forms of wet H2S cracking, environmental cracking, corrosion, and other modes of failure are outside the scope of this International Standard. It is intended to be used by refiners, equipment manufacturers, engineering contractors, and construction contractors.

Specifically, this International Standard is directed at the prevention of SSC of equipment (including pressure vessels, heat exchangers, piping, valve bodies, and pump and compressor cases) and components used in the refining industry. Prevention of SSC in carbon steel categorized under P-No. 1 in Section IX of the ASME Boiler and Pressure Vessel Code (BPVC) is addressed by requiring compliance with NACE SP0472.

This international standard applies to all components of equipment exposed to sour refinery environments (see Clause 6) where failure by SSC would (1) compromise the integrity of the pressure-containment system, (2) prevent the basic function of the equipment, and/or (3) prevent the equipment from being restored to an operating condition while continuing to contain pressure.

ANSI/NACE MR0175-2021/ISO 15156:2020

Product Number: ANSI-NACE MR0175-2021

Publication Date: 2021

$495.00

Note: This document was originally published with errors in Table A.16, page 3-32. These identified errors are corrected. Errata sheet is included.

NACE MR0175/ISO 15156 gives requirements and recommendations for the selection and qualification of carbon and low-alloy steels, corrosion-resistant alloys, and other alloys for service in equipment used in oil and natural gas production and natural gas treatment plants in H2S-containing environments, whose failure could pose a risk to the health and safety of the public and personnel or to the equipment itself.

Available for download

ANSI/NACE SP0115-2015/ISO15589-2:2012, “Petroleum, petrochemical and natural gas industries — Cathodic protection of pipeline transportation systems — Part 2: Offshore pipelines”

Product Number: 21190-SG

ISBN: 1-57590-310-5

Publication Date: 2015

$220.00

This standard specifies requirements and gives recommendations for the pre-installation surveys, design, materials, equipment, fabrication, installation, commissioning, operation, inspection and maintenance of cathodic protection (CP) systems for offshore pipelines for the petroleum, petrochemical and natural gas industries as defined in ISO 13623. It is applicable to carbon steel, stainless steel and flexible pipelines in offshore service, and to retrofits, modifications and repairs made to existing pipeline systems. Key words: Cathodic protection, impressed current, offshore pipeline, CP system design, galvanic anode, galvanic anode manufacturing, galvanic anode quality control, pipeline design for CP This nationally adopted ISO standard is not available for complimentary download by members.

Available for download

ANSI/NACE SP0300-2016/ISO 16784-1:2006, “Corrosion of metals and alloys — Corrosion and fouling in industrial cooling water systems — Part 1: Guidelines for conducting pilot scale evaluation of corrosion and fouling control additives for open recirculating cooling water systems”

Product Number: 21092-SG

ISBN: 1-57590-162-5

Publication Date: 2016

$109.00

Establishment of criteria for the pilot-scale evaluation of the performance of cooling water additives under field-specific operating conditions.

Available for download

ANSI/NACE TM0416-2023/ISO 22858:2020, Corrosion of metals and alloys — Electrochemical measurements — Test method for monitoring atmospheric corrosion

Product Number: ANSI-NACE TM0416-2023-ISO 22858-2020

$149.00

The purpose of this document is to provide instructions on the use of electrochemical sensors for monitoring atmospheric corrosion. These sensors are used to measure thin film electrolyte conductance, corrosion current or coating condition over long periods. This method permits the instantaneous evaluation of corrosion current that can be related to specific environmental conditions in real time. The instantaneous corrosion current measurements are not accessible using electrical resistance sensors or mass loss techniques. The technology described in this document complements other standard techniques for assessing atmospheric corrosion such as mass loss coupons, electrical resistance sensors or coated test panels (see ISO 8407 and ISO 4628-8). These continuous records of material condition can be useful for studying atmospheric corrosion, evaluating materials or managing assets.

Products tagged with 'standards collaboration'

ANSI/NACE MR0103-2015/ISO 17945:2015 (R2023), Petroleum, petrochemical and natural gas industries — Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments

ANSI/NACE MR0175-2021/ISO 15156:2020

ANSI/NACE SP0115-2015/ISO15589-2:2012, “Petroleum, petrochemical and natural gas industries — Cathodic protection of pipeline transportation systems — Part 2: Offshore pipelines”

ANSI/NACE SP0300-2016/ISO 16784-1:2006, “Corrosion of metals and alloys — Corrosion and fouling in industrial cooling water systems — Part 1: Guidelines for conducting pilot scale evaluation of corrosion and fouling control additives for open recirculating cooling water systems”

ANSI/NACE TM0416-2023/ISO 22858:2020, Corrosion of metals and alloys — Electrochemical measurements — Test method for monitoring atmospheric corrosion

Association for Materials Protection and Performance