Search
Filters
Close

51313-02194-Performance of Nickel Alloys in Dilute Hydrochloric and Sulfuric Acids Near and Above Boiling Point

Product Number: 51313-02194-SG
ISBN: 02194 2013 CP
Author: Vinay Deodeshmukh
Publication Date: 2013
$0.00
$20.00
$20.00

Hydrochloric and sulfuric acids are widely used in chemical process industries at various concentrations and temperatures and certain nickel-chromium-molybdenum alloys offer excellent resistance to these acids. Of particular interest in this paper is the corrosion performance of various nickel alloys in low concentrations of these acids at and above their boiling points. In this work the corrosion resistance of N06022 N06200 N10276 N30007 and N10362 was studied in nitrogenated solutions of 1 to 5% HCl and 1 to 5% H2SO4. The main goal of the test program was to identify conditions resulting in corrosion rates close to 0.5 mm/y the accepted maximum for industrial use. Based on the available data an attempt was made to draw iso-corrosion lines of 0.5 mm/y for selected alloys in the range 1 to 5% HCl and H2SO4. Additionally the corrosion performance of selected alloys (N10362 N06200 and N30007) was also studied in dilute HCl (1 to 5%) contaminated by ferric ions (0 to 1000 ppm). SEM/EDS analysis was conducted on alloys that developed thick films and efforts were made to correlate corrosion rates and the types of films developed in the alloys.

Hydrochloric and sulfuric acids are widely used in chemical process industries at various concentrations and temperatures and certain nickel-chromium-molybdenum alloys offer excellent resistance to these acids. Of particular interest in this paper is the corrosion performance of various nickel alloys in low concentrations of these acids at and above their boiling points. In this work the corrosion resistance of N06022 N06200 N10276 N30007 and N10362 was studied in nitrogenated solutions of 1 to 5% HCl and 1 to 5% H2SO4. The main goal of the test program was to identify conditions resulting in corrosion rates close to 0.5 mm/y the accepted maximum for industrial use. Based on the available data an attempt was made to draw iso-corrosion lines of 0.5 mm/y for selected alloys in the range 1 to 5% HCl and H2SO4. Additionally the corrosion performance of selected alloys (N10362 N06200 and N30007) was also studied in dilute HCl (1 to 5%) contaminated by ferric ions (0 to 1000 ppm). SEM/EDS analysis was conducted on alloys that developed thick films and efforts were made to correlate corrosion rates and the types of films developed in the alloys.

Product tags
Also Purchased
Picture for The corrosion resistance of duplex stainless steel grades in sulfuric acid
Available for download

51312-01502-The corrosion resistance of duplex stainless steel grades in sulfuric acid

Product Number: 51312-01502-SG
ISBN: 01502 2012 CP
Author: Carolina Canderyd
Publication Date: 2012
$20.00