AMPP Store - Maritime

Available for download

SP0111-HD2011, “Coating Technical File in Accordance with the IMO Performance Standard for Protective Coatings”

Product Number: 21153-HD2011

ISBN: 1-57590-245-1

Publication Date: 2011

$179.00

Maintaining the coating technical file (CTF) for ships to comply with the International Maritime Organization(IMO)’s “Performance Standard for Protective Coatings” (PSPC). File formats - electronic and paper. HISTORICAL DOCUMENT.

Available for download

SP0176-2007, Corrosion Control of Submerged Areas of Permanently Installed Steel Offshore Structures Associated with Petroleum Production

Product Number: 21018-SG

Publication Date: 2007

$179.00

HISTORICAL DOCUMENT. Materials, practices, and methods of corrosion control for fixed offshore structures associated with petroleum production. Three major areas: the submerged zone, the splash zone, and the atmospheric zone.

Available for download

SP0213-2013, Definition of Set Soluble Salt Levels by Conductivity Measurements

Product Number: 21172-SG

ISBN: 1-57590-260-5

Publication Date: 2013

$109.00

Method to describe specific levels of soluble salt contamination for the purpose of specifying surface cleanliness prior to coating. Employs surface conductivity measurements.

Available for download

SP0387-2019 Metallurgical and Inspection Requirements for Cast Galvanic Anodes for Offshore Applications

Product Number: 21036-SG

ISBN: 1-57590-081-5

Publication Date: 2019

$109.00

Defines minimum physical quality and inspection standards for cast sacrificial anodes for offshore applications.

Available for download

SP0408-2014, Cathodic Protection of Reinforcing Steel in Buried or Submerged Concrete Structures

Product Number: 21133-SG

ISBN: 1-57590-223-0

Publication Date: 2014

$179.00

DOWNLOADABLE HISTORICAL DOCUMENT-Guidelines for cathodic protection (CP) of reinforcing steel in buried or submerged concrete structures.

Available for download

SP0408-2019, Cathodic Protection of Reinforcing Steel in Buried or Submerged Concrete Structures

Product Number: 21133-2019

ISBN: 1-57590-223-0

Publication Date: 2019

$109.00

This NACE standard presents guidelines for cathodic protection (CP) of reinforcing steel in buried or submerged concrete structures. These guidelines provide corrosion control personnel with information to control corrosion of conventional reinforcing steel in portland cement concrete structures through the application of CP. The guidelines presented in this standard are limited to CP systems for new or existing buried or submerged reinforced concrete elements.

Available for download

SP0492-2016-SG (formerly RP0492), “Metallurgical and Inspection Requirements for Offshore Pipeline Bracelet Anodes"

Product Number: 21056-SG

ISBN: 1-57590-080-7

Publication Date: 2016

$109.00

Sets minimum physical quality and inspection standards for cast sacrificial anodes for offshore pipeline applications. Applicable to half-shell or segmented bracelet-type anodes, only.

Available for download

SP0616-2016, Standard for Hull Roughness Measurements on Ship Hulls in Dry Dock

Product Number: 21407-SG

Publication Date: 2016

$179.00

HISTORICAL DOCUMENT. Measuring hull roughness of vessels in dry-dock. Limited to a methodology—no interpretation presented. Hull roughness has a major impact on vessel fuel efficiency.

Available for download

SP21421-2017 Pictorial Standard for underwater Evaluation of Fouling Degree on Ship Hulls

Product Number: 21421-SG

ISBN: 1-57590-379-2

Publication Date: 2017

$109.00

One of the key factors affecting ship performance, particularly fuel consumption and associated GHG (Green House Gas) emissions, is the degree of biofouling on the immersed hull and propeller(s). Rates of biofouling accumulation vary considerably, depending on the suitability, age and physical condition of the coating system(s) applied to the hull, the voyaging, anchoring and lay up patterns of the ship, and the geographical regions where these take place.

Available for download

Spread of Corrosion Assessment on Flexible Elastomeric Insulation Systems in a Continuous Salt-Water Spray Environment

Product Number: 51317--8907-SG

ISBN: 8907 2017 CP

Author: Luis Mario Rodriguez

Publication Date: 2017

$20.00

Details of a test procedure jointly developed by TNO/Endures, Netherlands to assess the long term performance of insulation systems when a damaged section of the system is subject to a continuous salt-water spray environment.

Available for download

SSPC-AB 3-2017, Ferrous Metallic Abrasive

Product Number: SSPC-AB 3-2017

Publication Date: 2017

$179.00

HISTORICAL DOCUMENT.

Available for download

SSPC-AB 3-2023, Ferrous Metallic Abrasive

Product Number: SSPC-AB 3-2023

$109.00

This standard contains the requirements for ferrous metallic abrasive used for the removal of rust, mill scale, paint, or other surface coating systems by blast cleaning.

This standard covers previously unused abrasive material. It does not address cleanliness of recycled abrasive processed through field or shop abrasive blast cleaning units. Requirements for recycled ferrous metallic abrasive are contained in SSPC-AB 2.

Maritime

Association for Materials Protection and Performance