Celebrate World Corrosion Awareness Day with 20% off eCourses and eBooks with code WCAD2024 at checkout!
Conference Paper - This paper describes the requirements of the standard, additional inspection points, and several uses of the standard in the field where clear specification language was imperative to successful project completion. NACE 5/SSPC-SP 12 standard confined to water jetting - which makes use of ultra-high pressure water that is nonabrasive. Four levels of visible post-cleaning condition and three levels of non-visible condition are defined.
We are unable to complete this action. Please try again at a later time.
If this error continues to occur, please contact AMPP Customer Support for assistance.
Use this error code for reference:
Please login to use Standards Credits*
* AMPP Members receive Standards Credits in order to redeem eligible Standards and Reports in the Store
You are not a Member.
AMPP Members enjoy many benefits, including Standards Credits which can be used to redeem eligible Standards and Reports in the Store.
You can visit the Membership Page to learn about the benefits of membership.
You have previously purchased this item.
Go to Downloadable Products in your AMPP Store profile to find this item.
You do not have sufficient Standards Credits to claim this item.
Click on 'ADD TO CART' to purchase this item.
Your Standards Credit(s)
1
Remaining Credits
0
Please review your transaction.
Click on 'REDEEM' to use your Standards Credits to claim this item.
You have successfully redeemed:
Go to Downloadable Products in your AMPP Store Profile to find and download this item.
HISTORICAL DOCUMENT. This Technical Committee Report establishes the pertinent parameters to be observed and/or controlled during laboratory and field evaluation of corrosion inhibitors for the purpose of establishing a common baseline for the comparison of the results from such evaluations.
Establishes material requirements for resistance to SSC in sour petroleum refining and related processing environments containing H2S either as a gas or dissolved in an aqueous (liquid water) phase with or without the presence of hydrocarbon. This International Standard does not include and is not intended to include design specifications. Other forms of wet H2S cracking, environmental cracking, corrosion, and other modes of failure are outside the scope of this International Standard. It is intended to be used by refiners, equipment manufacturers, engineering contractors, and construction contractors.
Specifically, this International Standard is directed at the prevention of SSC of equipment (including pressure vessels, heat exchangers, piping, valve bodies, and pump and compressor cases) and components used in the refining industry. Prevention of SSC in carbon steel categorized under P-No. 1 in Section IX of the ASME Boiler and Pressure Vessel Code (BPVC) is addressed by requiring compliance with NACE SP0472.
This international standard applies to all components of equipment exposed to sour refinery environments (see Clause 6) where failure by SSC would (1) compromise the integrity of the pressure-containment system, (2) prevent the basic function of the equipment, and/or (3) prevent the equipment from being restored to an operating condition while continuing to contain pressure.
HISTORICAL DOCUMENT. Material requirements for resistance to sulfide stress cracking (SSC) in sour refinery process environments (i.e., environments that contain wet hydrogen sulfide [H2S]). AKA "wet H2S cracking".
CORRECTION OF PUBLICATION:
In January 2016, NACE published an incorrect version of ANSI/NACE MR0103/ISO 17945:2015 (Petroleum, petrochemical and natural gas industries — Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments). That document was incorrectly titled ANSI/NACE MR0103/ISO 17495:2016. The erroneous standard was retracted at the time and the NACE Store has the corrected version. NOTE: The contents of both versions of the standard are identical. The only discrepancies are in the title.
Selection and qualification of carbon and low-alloy steels, corrosion-resistant alloys, and other alloys in oil and natural gas production and treatment plants with H2S-environments. With inquiries and responses embedded in the standard. Sold as a downloadable only.
International Standard ISO 15156-1:2015 Technical Circular 1. Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 1: General principles for selection of cracking-resistant materials.
International Standard IS) 15156-2:2015 Technical Circular 1. Petroleum and natural gas industries-Materials for use in H2S-containing environments in oil and gas production-Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons.
International Standard ISO 15156-2:2015 Technical Circular 2-Petroleum and natural gas industries-Materials for use in H2S-containing environments in oil and gas production, Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons
International Standard ISO 15156-2:2015 Technical Circular 3-Petroleum and natural gas industries-Materials for use in H2S-containing environments in oil and gas production, Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons
2009 EDITION - HISTORICAL DOCUMENT.
Selection and qualification of carbon and low-alloy steels, corrosion-resistant alloys, and other alloys for service in oil and natural gas production and treatment plants with H2S-containing environments.
CHINESE TRANSLATION. Selection and qualification of carbon and alloy steels for service in oil and natural gas production & treatment in H2S-containing environments. Multiple downloadable files.
HISTORICAL DOWNLOADABLE 2015 EDITION.
Selection and qualification of carbon and low-alloy steels, corrosion-resistant alloys, and other alloys for service in equipment in oil and natural gas production and NG treatment plants in H2S-containing