AMPP Store - Products tagged with 'Standards Credit Redeemable'

Available for download

SP0775-2013-HD2013-SG "Preparation, Installation, Analysis, and Interpretation of Corrosion Coupons in Oilfield Operations"

Product Number: 21017-HD2013

ISBN: 1-57590-086-6

Publication Date: 2013

$179.00

Uniform, industry-proven methods to monitor corrosion in oil production systems. Preparing, analyzing, and installing corrosion coupons. Corrosion rate calculations and typical data recording form included.

Available for download

SP0775-2018 "Preparation, Installation, Analysis, and Interpretation of Corrosion Coupons in Oilfield Operations"

Product Number: 21017-SG

Publication Date: 2018

$179.00

HISTORICAL DOCUMENT. This standard outlines procedures for preparing, installing, and analyzing metallic corrosion coupons. Factors considered in the interpretation of results obtained from these corrosion coupons are also included for the use of oil and service industry personnel. This standard is maintained by TG 409.

Available for download

SP0892-2007-SG (formerly RP0892), Coatings and Linings over Concrete for Chemical Immersion and Containment Service

Product Number: 21060-SG

ISBN: 1-57590-136-6

Publication Date: 2007

$109.00

A guide for personnel who prepare specifications, standards, and procedures for protective coatings of concrete surfaces. Based on best current knowledge and experience.

Available for download

SP21421-2017 Pictorial Standard for underwater Evaluation of Fouling Degree on Ship Hulls

Product Number: 21421-SG

ISBN: 1-57590-379-2

Publication Date: 2017

$109.00

One of the key factors affecting ship performance, particularly fuel consumption and associated GHG (Green House Gas) emissions, is the degree of biofouling on the immersed hull and propeller(s). Rates of biofouling accumulation vary considerably, depending on the suitability, age and physical condition of the coating system(s) applied to the hull, the voyaging, anchoring and lay up patterns of the ship, and the geographical regions where these take place.

Available for download

SP21424-2018-SG, “Alternating Current Corrosion on Cathodically Protected Pipelines: Risk Assessment, Mitigation, and Monitoring”

Product Number: 21424-SG

ISBN: 1-57590-384-9

Publication Date: 2018

$109.00

This standard practice presents guidelines and procedures for use during risk assessment, mitigation, and monitoring of corrosion on underground, cathodically protected steel piping systems caused by proximity to alternating current (AC) power supply systems.

Available for download

SP21430-2019, “Standard Framework for Establishing Corrosion Management Systems”

Product Number: 21430-2019

ISBN: 1-57590-396-2

Publication Date: 2019

$109.00

A corrosion management system (CMS) for assets is described in this Standard. The framework is intended to be applicable to a wide variety of asset types and is not focused on a particular industry or sector. Non-mandatory guidance is provided throughout this Standard to aid users with implementing the Standard. The framework in this Standard can be utilized to develop a stand-alone CMS or to integrate corrosion management into an organization’s existing management system. Additionally, some processes covered in this framework may already be implemented by an organization, for example, management of change (MOC). An organization may modify their existing processes to address the elements identified in this framework.

Available for download

SP21433-2019/IEEE 2445, Inspection and Assessment of Below Grade and Groundline Corrosion on Weathering Steel on Electrical Transmission and Distribution Structures

Product Number: 21433-2019

ISBN: 1-57590-405-5

Publication Date: 2019

$109.00

The buried or below-grade sections of electric utility steel transmission and distribution structures are often subject to corrosive environments and are not easily accessible for visual inspection. Prior to the publication of this standard, no industry practice existed to help electric utilities determine a prioritized listing of structures to be inspected or that described an inspection and assessment procedure to evaluate below-grade corrosion problems.

Available for download

SP21434-2020, Cathodic Protection Systems for the Mitigation of External Corrosion of Buried and Submerged Metallic Piping Systems at Nuclear Power Plants

Product Number: 21434-2020

Publication Date: 2020

$109.00

New in 2020! This standard presents accepted methods and practices regarding the use of cathodic protection (CP) for the control of external corrosion on buried or submerged carbon steel, stainless steel, gray cast iron, ductile cast iron, copper, and aluminum piping systems at nuclear power plants. This standard may be useful at facilities other than nuclear power plants that contain complex networks of buried or submerged piping, which may be composed of more than one material and may or may not be grounded.

Available for download

SP21461-2020, Corrosion Evaluations of Masonry Clad Steel Frame Buildings (Pre-1950)

Product Number: SP21461-2020

ISBN: 1-57590-409-8

Publication Date: 2020

$109.00

When distress of a structure is evident, it is important to determine the nature of the degradation to select the best restoration strategy. This standard practice provides testing procedures and investigative techniques for the evaluation of masonry-clad steel frame buildings. The investigation and evaluation techniques described in this standard focus on degradation resulting from corrosion of the steel frame.

This standard provides the investigator, corrosion specialist, engineer, or owner a framework for evaluating the corrosion condition of a steel frame building beyond simple visual inspection and basic sounding techniques. Evaluation techniques that identify general and localized corrosion of masonry-clad steel frame buildings are provided.

This standard is intended for use by corrosion specialists, historic architects, structural engineers, and exterior building envelope consultants involved with evaluating corrosion of steel frame buildings and the subsequent effect on the masonry cladding. It also may be useful to owners of historic buildings whose service life may be affected by steel frame corrosion.

Available for download

SP21464-2020, Erosion Management in the Oil and Gas Industry

Product Number: SP21464-2020

Publication Date: 2020

$109.00

Erosion is defined by NACE International as “The progressive loss of material from a solid surface resulting from mechanical interaction between that surface and a fluid, a multicomponent fluid, or solid particles carried with the fluid.”

This SP provides guidance on internal erosion and erosion-corrosion management. Guidance is given for erosion and erosion-corrosion threat assessment/prediction, barrier selection, monitoring, inspection, risk assessment and data management. This SP covers mainly sand caused erosion. However, the guidance in this document can be used for other solid particles.

This SP is applicable to tubular products, e.g., tubing, pipelines, flowlines, risers, valves, and piping systems.

Available for download

SSPC Checklist of Items Commonly Found in Specifications for Coating Steel and Concrete

Product Number: SSPC CHECKLIST

Publication Date: 2011

$109.00

Available for download

SSPC CPC-1/NACE SP21412-2020, Corrosion Prevention and Control Planning

Product Number: SP21412-2020

Publication Date: 2020

$109.00

Revised in 2020! This standard on corrosion prevention and control (CPC) planning is intended to support future CPC improvements to national acquisition and sustainment of equipment, systems, facilities, and infrastructure at an acceptable cost. It provides a standardized framework for a supplier’s plan to control corrosion of supplied products and structures. The standard is intended for use by public and private facility owners/acquisition agencies that require their suppliers to provide corrosion prevention and control procedures as a deliverable provided with the purchased product, installation, or system. The standard includes:

Attributes of the supplied product, system or facility that require planning for CPC;
Considerations for material selection and design of a product, system or facility to minimize corrosion;
Items or topics that should be addressed in a CPC plan;

Items or topics that should be addressed in CPC planning which affect CPC in design, fabrication and construction, operation and use, and maintenance and sustainability;
Characteristics of the key elements of CPC planning;
New in this revision - Approaches to CPC assessment.

NOTE: Readers should use the latest version of Adobe’s free Acrobat Reader to ensure this document performs as intended. It contains internal hyperlinks that may not perform correctly if other software is used.

Products tagged with 'Standards Credit Redeemable'

Association for Materials Protection and Performance