Menu
Search
Filters
Close
Menu

Individual Conference Papers

View as
Sort by
Display per page
Picture for Management of Corrosion in Shale Development
Available for download

Management of Corrosion in Shale Development

Product Number: 51319-13189-SG
Author: Sytze Huizinga
Publication Date: 2019
$20.00

In recent years production of oil and gas from shale formations has multiplied and now contributes significantly to oil and gas supply. This type of unconventional production differs from historical conventional approaches with far reaching consequences for asset integrity management.The present paper outlines corrosion threats associated with shale development including acidizing fracing flowback CO2 and H2S in produced fluids and artificial lift. Usually little detailed information about corrosive exposure is available upfront. The production mode contributes to complex and highly variable environmental conditions. Corrosion cracking and weight loss corrosion of well completion materials are known to have occurred.Whereas classical asset integrity management is usually rolled out over many years the typical timescale in shale production ranges from just months to a few years driving low-cost quick earn-back scenarios. This paper discussed the consequences for materials selection and corrosion control.
Managing Construction Risk through Aggressive Schedule Managemen
Available for download

Managing Construction Risk through Aggressive Schedule Management

Product Number: 41211-640-SG
Author: Greg Powers
Publication Date: 2011
$20.00

Contractors often agree to deliver a project on a certain schedule. Then, once the work begins, the project suffers significant impacts, oftentimes through no fault of either the General Contractor or the Subcontractors, and then they do not have the tools in place to properly communicate the impacts, recover the losses and manage success.
Picture for Managing Corrosion Risk in Carbon Capture and Storage Facilities Using Non-Intrusive Monitoring Technologies
Available for download

Managing Corrosion Risk in Carbon Capture and Storage Facilities Using Non-Intrusive Monitoring Technologies

Product Number: 51323-18856-SG
Author: William Fazackerley
Publication Date: 2023
$20.00

Carbon capture and storage (CCS) or utilisation (CCU) of the captured carbon dioxide (CO2) are tools for reducing global carbon emissions, and to combat climate change both are required. According to the IEA1, in 2021, the global capacity of CCS grew by 48%i, showing that this technology is becoming more popular to meet sustainability targets.
Managing Integrity and Corrosion Through Real-Time Prediction Modeling Approach – “Software Sensor” Concept
Available for download

Managing Integrity And Corrosion Through Real-Time Prediction Modeling Approach – “Software Sensor” Concept

Product Number: 51322-18126-SG
Author: Slawomir Kus, Kwei Meng Yap, Pierre Constantineau
Publication Date: 2022
$20.00

Safe and stable operation of the process plant through its life cycle is an ultimate target of any integrity management system. Over the last decades, a number of possible ways and systems for managing plant integrity were described and implemented.1-4 A common path for all those efforts was to control and manage corrosion processes in a more-or-less systematic way by applying certain measures (monitoring techniques, material selection guidelines, operating procedures etc.) and performance indicators (remaining time-to-failure, inhibitor usage etc.). An effective corrosion and integrity management system, in theory, should be capable to “uncover” excessive corrosion incidents before serious damage occurs. Unfortunately, unexpected corrosion-related failures are still occurring in the petroleum industry.5 This situation stems predominantly from relatively poor data organization and management, leaving corrosion and key process information spread and hidden across different refinery functions and systems.  
Picture for Managing Risk in Sustainable Aviation Fuel and Renewable Diesel Production with Online Corrosion Monitoring
Available for download

Managing Risk in Sustainable Aviation Fuel and Renewable Diesel Production with Online Corrosion Monitoring

Product Number: 51324-20579-SG
Author: William Fazackerley
Publication Date: 2024
$40.00
The adoption of renewable feedstocks by refiners is driven by a variety of factors, including regulatory compliance, sustainability, and diversification of their product portfolio. However, the introduction of these feedstocks poses significant risks due to their chemical differences compared to traditional crude feedstocks. To address these risks, many refiners have undertaken costly conversion projects to protect their plants from damage caused by these new feedstocks. In addition, refiners are increasingly turning to online integrity sensors to quickly detect corrosion and mitigate unwanted risk, helping to ensure that their critical assets remain healthy and reliable. With these strategies in place, refiners can effectively manage the challenges of incorporating “bio” feedstocks into their refining processes while ensuring the safety and longevity of their equipment. This paper will feature a case study from a major European refiner who have converted an old hydroprocessing unit into producing sustainable fuels from 100% bio feedstock.
Managing the Risk of Corrosion-Coatings Failure
Available for download

Managing the Risk of Corrosion-Coatings Failure

Product Number: 41206-293-SG
Author: Bruce Woodruff
Publication Date: 2006
$20.00

Coatings maintenance projects are typically scheduled and selected based on ASTM rust grade, service environment - corrosion rate, coating condition and project visibility or aesthetics. There is something missing.  That something is a risk-based assessment.  This paper will demonstrate how to make a risk grid and accommodate this into condition assessment criteria for prioritizing and scheduling painting projects.
Picture for Managing wet H2S Cracking in Refineries
Available for download

Managing wet H2S Cracking in Refineries

Product Number: 51312-01136-SG
ISBN: 01136 2012 CP
Author: Militza I. Lobaton
Publication Date: 2012
$20.00
Picture for Mandatory Integrity Reassessment of Gravity-Fed Crude Oil Pipeline Using MP-ICDA in Kuwait
Available for download

Mandatory Integrity Reassessment of Gravity-Fed Crude Oil Pipeline Using MP-ICDA in Kuwait

Product Number: 51321-16269-SG
Author: Amer Jaragh/Shabbir Safri/Patrick Teevens/Miles Huynh/Tijan Pinnock/Perry O’Hearn
$20.00
Picture for Manhole Rehabilitation - The Role Played by Linings
Available for download

Manhole Rehabilitation - The Role Played by Linings

Product Number: 41212-689-SG
Author: Kevin Morris
Publication Date: 2012
$20.00

The paper will be a discussion of the various generic lining products available in the marketplace today, required application methods and potential issues associated with each. Additional discussion will take place around ancillary work required to achieve a successful long-term installation.
Picture for Mapping Effective Corrosion Inhibitor Dose in a Large Onshore Oilfield
Available for download

Mapping Effective Corrosion Inhibitor Dose in a Large Onshore Oilfield

Product Number: 51314-4245-SG
ISBN: 4245 2014 CP
Author: Cameron Mackenzie
Publication Date: 2014
$0.00
Martin “B-C” Zone Reservoir Liner Replacement Doing our Part for the Tucson Water Department Construction/Inspection Team
Available for download

Martin “B-C” Zone Reservoir Liner Replacement Doing our Part for the Tucson Water Department Construction/Inspection Team

Product Number: 41213-733-SG
Author: Eric Brackman
Publication Date: 2013
$20.00

In 2010 the Tucson Water Department began to implement the Tucson Water Reservoir and Tank Program. The purpose of the program was to evaluate and repair approximately 70 concrete and steel potable water storage facilities. 
Picture for Investigation Of Structural Materials And Techniques For Microreactor Fabrication
Available for download

Material and Manufacturing Study to Enable Coreblocks for Microractor Technology

Product Number: ED22-17136-SG
Author: Lindsay B. O’Brien, Holly R. Trellue, Amber N. Black, Ryan M. Mier, Andrew N. Duffield, Colt J. Montgomery, John. S. Carpenter
Publication Date: 2022
$20.00

Microreactor technology has the potential to provide efficient, modular, and inherently safe baseload power that can be used in regions that are too remote to support the larger, light water reactor (LWR) technology that dominates today’s nuclear energy landscape. To generate enough power and thermal efficiency to be attractive, the microreactors must be operated at higher temperatures (approximately 1112-1652°F or 600-900°C) than traditional LWR’s, and therefore are cooled using technologies such as heat pipes with gas, sodium, or molten salt coolants. 
Categories
Industry
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support