Menu
Search
Filters
Close
Menu

Search and Filter

Toggle Open/Closed
View as
Display per page
14122 total products found.
Picture for TM0399-2018 Determination of Phosphonate Concentration in Water
Available for download

TM0399-2018, Determination of Phosphonate Concentration in Water

Product Number: 21238-SG
ISBN: 1-57590-084-X
Publication Date: 2018
$109.00

STABILIZATION NOTICE: This document has been declared “Stabilized” by NACE Task Group (TG) 414 under the auspices of Specific Technology Group (STG) 31 and will no longer be subjected to periodic reviews for currency. 

This standard test method is a colorimetric determination of low concentrations of phosphonate residuals in water from oil and gas production, water injection/disposal, and other industrial applications. 
Picture for 10097 Worst Case TLC: Cold Spot Corrosion
Available for download

10097 Worst Case TLC: Cold Spot Corrosion

Product Number: 51300-10097-SG
ISBN: 10097 2010 CP
Author: Yves Gunaltun, Suchada Punpruk, Matina Thammachart and Pornthep Tanaprasertsong
Publication Date: 2010
$20.00
Picture for Investigating the Effect of Temperature in the Community Structure of an Oilfield Microbial Consortium and Its Impact on Corrosion of Carbon Steel
Available for download

Investigating the Effect of Temperature in the Community Structure of an Oilfield Microbial Consortium and Its Impact on Corrosion of Carbon Steel

Product Number: 51319-13343-SG
Author: Silvia Salgar Chaparro
Publication Date: 2019
$20.00

Crude oil and formation water in oil reservoirs hosts a variety of microorganisms. The community structure of these microbial populations depends on the environmental conditions. Regularly oil reservoirs present high temperatures favouring the activity of thermophiles microbes. Nonetheless temperature decreases after the oil-water extraction along the oil production facilities. The effect of this temperature fluctuation from thermophilic (60°C) conditions to mesophilic (40°C) conditions on the microbial composition has been investigated in a microbial consortium recovered from a Western Australian oilfield. NGS sequencing of 16S rRNA gene was implemented for the diversity profiling of total and active community under both thermal conditions. Additionally carbon steel coupons were exposed for studying the impact of the microbial structure changes in the corrosivity of the consortium. Results showed noticeable differences in the relative abundance of the species and likewise their corrosive behaviour. Sulphide producing prokaryotes and methanogens were the predominant microbial groups at a higher temperature whereas acid producing and iron-related bacteria also played a role in the mesophilic consortium. Both consortia caused weight losses to the metal coupons exposed however corrosion rates were dissimilar from which thermophile community was the most corrosive. This analysis suggests that microbiologically influenced corrosion rates and mechanisms may differ along the oil facilities according to the variation of abundant species due to temperature changes.
Picture for 10301 Threshold Strain and Cyclic Stress Effects on Stress Corrosion Cracking of Duplex SS 2205
Available for download

10301 Threshold Strain and Cyclic Stress Effects on Stress Corrosion Cracking of Duplex Stainless Steel 2205 in Chloride Environment and White Liquor

Product Number: 51300-10301-SG
ISBN: 10301 2010 CP
Author: Di Yang, Xiaoyuan Lou, Preet M. Singh and Richard W. Neu
Publication Date: 2010
$20.00
Picture for 00322 SCALE CONTROL IN GEOTHERMAL
Available for download

00322 SCALE CONTROL IN GEOTHERMAL SYSTEMS

Product Number: 51300-00322-SG
ISBN: 00322 2000 CP
Author: Libardo A. Perez
$20.00
Picture for Performance of Monel pipeline in benzene processing unit
Available for download

51318-11041-Performance of Monel pipeline in benzene processing unit

Product Number: 51318-11041-SG
Author: Hussain Al-Mahamadh / Ali H. Al-Shawaf
Publication Date: 2018
$20.00

A comprehensive corrosion investigation of a pipeline made of UNS N04400. Samples of the failed pipeline were obtained for investigation. The study concludes that the failure can be attributed to acidic corrosion that formed inside the pipeline.
Picture for Electrochemical Corrosion Behavior of Niobium Alloys as Metallic Bio-Implants
Available for download

51316-7270-Electrochemical Corrosion Behavior of Niobium Alloys as Metallic Bio-Implants

Product Number: 51316-7270-SG
ISBN: 7270 2016 CP
Author: Wei Wang
Publication Date: 2016
$20.00

Mechanical properties and microstructure of Nb-Ta-Re, Nb-Re, Nb-Pd, and Nb-Pt alloys were studied by nano-indentation measurements and X-ray diffraction. Corrosion behavior was compared by electrochemical methods, including open circuit potential measurement, potentiodynamic, and electrochemical impedance spectroscopy.
Picture for Real Time Corrosion Monitoring for High Sour Applications
Available for download

Real Time Corrosion Monitoring for High Sour Applications

Product Number: 51321-16384-SG
Author: Dawood Al Sharyani/Monica Fernandez/Naveed Munir/Michael Jones/Hallgeir Jenssen/Kjell Wold
Publication Date: 2021
$20.00
Picture for Measuring the Localized Corrosion Due to Carbonic Acid
Available for download

Measuring the Localized Corrosion Due to Carbonic Acid

Product Number: 51319-12923-SG
Author: Omar Yepez
Publication Date: 2019
$20.00

The mechanism of carbonic acid corrosion is of a paramount importance for the oil industry. This is because production of crude is always accompanied by CO2 and water. Carbonic acid localized corrosion is by far more important than general corrosion. This is because you just need one tiny rupture in the pipe to have a failure which will need to be addressed and repaired. Methods to determine localized corrosion are very few. In one method the electrochemical potential of the metal specimen is increased with time until the material fails which is detected as a large oxidation current. In another a large constant oxidative potential is imposed on the metal coupon then its temperature is increased until a high current is observed. In both the nature of the surface at corrosion potential is not preserved. Electrochemical noise has come to address this problems because this method does not perturb the surface of the metal and all its measurements occurs at open circuit potential. However this non-perturbative method has little quantitative value and the interpretation of the data obtained is still very difficult. For instance the noise current cannot be integrated to know the extension of the damage. This is because one does not know to what electrode the noise belongs. In this paper the localized carbonic acid corrosion of a carbon steel at corrosion potential was measured. This was performed by pulsing at the corrosion potential and changing the temperature of the test. Electrochemical impedance spectroscopy was also used in the same manner. In both methods the localized current was integrated and the localized damage was determined.Key words: Localized corrosion CO2 corrosion electrochemical methods.
Picture for Building an Oil and Water Partitioning Model for Corrosion Inhibitor Dosage Based on Novel Residual Technique
Available for download

Building an Oil and Water Partitioning Model for Corrosion Inhibitor Dosage Based on Novel Residual Technique

Product Number: 51323-19205-SG
Author: Peng Jin, Tracey Jackson, Haitao Fang, Lei Huang, Gaoxiang Wu, Ramsey Smith, Yao Xiong, Renita Nnoli
Publication Date: 2023
$20.00

In the production of oil and gas, corrosion inhibitor (CI) is usually dosed into multiphase flows (oil/water/gas). The partitioning behavior of CI among the different phases is a critical factor for a successful application. Unreliable measurement of CI residuals can lead to inaccurate dosing, overtreatment, and higher operating costs.
Picture for 08297 Monitoring of Effectiveness of Dehumidification System for Corrosion Control Inside Upper Stee
Available for download

08297 Monitoring of Effectiveness of Dehumidification System for Corrosion Control Inside Upper Steel Box Girder in Yeongjong Grand Bridge Using Thin-Film Electrical Resistance Sensors

Product Number: 51300-08297-SG
ISBN: 08297 2008 CP
Author: SeonYeob Li, SungWon Jung, and Kyeong Park
Publication Date: 2008
$20.00
A History Of Corrosion Improvement: Over the last few decades there has been significant improvement especially with automobiles.
Available for download

A History Of Corrosion Improvement: Over the last few decades there has been significant improvement especially with automobiles.

Product Number: 41213-761-SG
Author: Joe Larson
Publication Date: 2013
$20.00

This paper is a narrative of the improvements in corrosion resistance, with a strong automotive bent, made during the author’s tenure. Included are anecdotes, observations, and insights gained from interaction with many technical personnel over the years. It defines the confluence of multiple factors including steel manufacturing, new facilities being built, interesting new technologies, and the influence of competition.
Picture for Tele-Inspection Nondestructive Evaluation for Corrosion Applications
Available for download

Tele-Inspection Nondestructive Evaluation for Corrosion Applications

Product Number: 51323-19085-SG
Author: Connie LaMorte, Josh James
Publication Date: 2023
$20.00

Automated inspection systems are widely used in many industries. Tele-commuting enables an entire spectrum of virtual workers. Tele-inspection combines the automation hardware with a virtually present human-inspector to allow the transfer of manual dexterity in real-time over the internet.
Picture for Characterizing Corrosion On AA-7075 Through Alternative Cleaning Methods And Optical Profilometry
Available for download

Characterizing Corrosion On AA-7075 Through Alternative Cleaning Methods And Optical Profilometry

Product Number: 51322-17579-SG
Author: Steven Kopitzke, Karla De Jesus Santiago, Rachel Black
Publication Date: 2022
$20.00

Measuring the severity of corrosion on a specific alloy is often accomplished via mass loss using ASTM G-1. These processes work well and provide high fidelity data for many materials, especially steels. However, recent internal findings and disclosures from other research groups have highlighted a potential issue with using mass loss techniques to measure the damage on some aluminum alloy surfaces.
Picture for Effect Of Temperature On Inhibition Efficiency And Data Analysis With Different Adsorption Isotherms
Available for download

Effect Of Temperature On Inhibition Efficiency And Data Analysis With Different Adsorption Isotherms

Product Number: 51322-17895-SG
Author: Yi He, Shuai Ren, Xi Wang, David Young, Marc Singer, Maalek Mohamed-Saïd, Sheyla Camperos
Publication Date: 2022
$20.00

In the oil and gas industry, long-distance transportation of petroleum and related products is usually carried out in large-diameter carbon steel pipelines. Water present with the oil, along with corrosive species such as CO2, H2S and organic acids, causes severe corrosion of the inner pipe walls.1 An effective method of controlling corrosion is to continuously inject corrosion inhibitors into pipelines conveying oil-water mixtures. As corrosion occurs on water wetted metal surfaces, corrosion inhibitor (CI) molecules form protective films which retard electrochemical reaction rates at the water-metal interface,2 thereby protecting carbon steel pipes against CO2 ("sweet") corrosion and H2S ("sour") corrosion. Most commercial CIs are a complex mixture of several compounds that contain surfactant-type active ingredients, such as imidazoline, amine, phosphate ester, and quaternary ammonium derivatives.
Picture for Evaluation of Galvanic Coupling of Lean Duplex Stainless Steel and Carbon Steel in Concrete Structures in Marine Environment
Available for download

Evaluation of Galvanic Coupling of Lean Duplex Stainless Steel and Carbon Steel in Concrete Structures in Marine Environment

Product Number: 51319-13334-SG
Author: Zehbour Panossian
Publication Date: 2019
$20.00

Duplex stainless steels are used in concrete structures installed under high aggressiveness conditions such as marine atmosphere or areas with intense use of de-icing salt. This type of rebars are used when a very service life is required (over 100 years) or when there are maintenance restrictions such as inaccessibility or very high maintenance costs and disturbances to the population. Due to the high initial cost the use of duplex stainless steel rebars are restricted to the outside layer of a concrete structure which is directly subjected to a chloride contamination whereas at the inside areas or in areas protected from a chloride contamination carbon steel rebars are used electrically connected to the stainless steel rebars. However the galvanic corrosion of the stainless steel/carbon steel couple is a concern because different metals are kept in contact with each other in the structure. This work aims at studying the behavior of UNS S32304 stainless steel rebars in electric contact with bare steel rebars. Corrosion tests were conducted with the rebars immersed in pore solution and embedded in concrete subjected to cycles of contamination by chloride ions. Tests using AISI 304 were conducted as a reference.
Picture for Corrosion Resistance of the Super-Austenitic Stainless Steel UNS S31266 for Geothermal Applications
Available for download

Corrosion Resistance of the Super-Austenitic Stainless Steel UNS S31266 for Geothermal Applications

Product Number: 51317--8825-SG
ISBN: 8825 2017 CP
Author: Ralph Baessler
Publication Date: 2017
$20.00

Update on recent experiences from laboratory tests performed at service conditions for geothermal applications.  Incorporated in a catalogue of suitable materials for applications geothermal power plants. Users shall be enabled to have a basis for designing such facilities.
Picture for Cathodic Protection Coupon Use for Buried Piping in Plant (i.e. Complex) Facilities
Available for download

Cathodic Protection Coupon Use for Buried Piping in Plant (i.e. Complex) Facilities

Product Number: 51317--8824-SG
ISBN: 8824 2017 CP
Author: Douglas Gilroy
Publication Date: 2017
$20.00

Measurement and interpretation of cathodic protection data in plant facilities present challenges where mixed metals are electrically continuous with the protected structure. This paper address some of the confusion and important aspects when using coupons for buried piping in mixed-metal circuits.
Picture for Practical Galvanic Series for Improved Materials Selection in Sweet Systems
Available for download

Practical Galvanic Series for Improved Materials Selection in Sweet Systems

Product Number: 51319-12855-SG
Author: Guenter Schmitt
Publication Date: 2019
$20.00

In oil and gas production and transportation dissimilar materials are frequently combined for technical and economic reasons. However the combination of dissimilar metals can result in corrosion due to galvanic or bimetallic effects. The driving force for this kind of corrosion is the difference of the corrosion potentials of the individual materials in the given environment which causes element currents the magnitude of which depends on the sum of all system resistances (Ohmic Law). Any assessment of the corrosion rates at bimetallic couplings needs the information on the corrosion (rest) potentials of the bimetallic partners in the relevant medium.Due to the lack of consistent literature data a practical galvanic series was established in this work for standard oil country tubular goods (OCTG) steels corrosion resistant alloys (CRA) as well as graphite (as gasket material) in a model sweet upstream environment. From polarization resistance measurements information was obtained on the corrosion rate of the C-steels in the absence of bimetallic coupling. Furthermore the corrosion rates encountered at the partners of bimetallic couples were quantified via mass loss measurements. The results of this work allow better assessment of the severity of bimetallic corrosion and hence a more appropriate selection of materials which prevents corrosion failures increases the integrity of assets and saves costs.
Picture for 11244 Field Experience: Identification of the Potential Mechanism of Flow Assisted Corrosion
Available for download

11244 Field Experience: Identification of the Potential Mechanism of Flow Assisted Corrosion Due to a Large Viscosity Contrast in Biphasic Flow of Heavy Crude Oil

Product Number: 51300-11244-SG
ISBN: 2011 11244 CP
Author: Bernard J. Pesneau and Hugo Caceres Rosales
Publication Date: 2011
$20.00
Picture for Effect of CP on the Occurrence of SCC in X80 and X100 Pipe Steels in a Near-Neutral pH Environment
Available for download

Effect of CP on the Occurrence of SCC in X80 and X100 Pipe Steels in a Near-Neutral pH Environment

Product Number: 51317--9147-SG
ISBN: 9147 2017 CP
Author: Li Yan
Publication Date: 2017
$20.00

In this work, stress corrosion cracking (SCC) of X80 and X100 pipe steels under various cathodic protection (CP) levels in near-neutral pH environment was investigated. The results showed that X100 tended to form longer SCC cracks compared to X80 steel.
Picture for Development Of A F22 Compatible Scale Inhibitor
Available for download

Development Of A F22 Compatible Scale Inhibitor

Product Number: 51322-17610-SG
Author: Ya Liu, Benton Hutchinson, Rose Lehman, Jeffrey Russek, James Outlaw
Publication Date: 2022
$20.00

F22 is a low alloy steel that typically contains 12% Carbon, 2.25% Chromium, and 1.0% Molybdenum1. This steel has been widely used in oil production systems, especially in well head design and construction. As a low alloy steel, F22 can be corroded by oilfield chemicals under certain circumstances. For example, it was observed in the Gulf of Mexico that typical scale inhibitor chemistries caused severe corrosion on F22.
Picture for The Role of Synthetic Hydrocarbon on Corrosion Behavior of API X65 Carbon Steel in a CO2 Multiphase
Available for download

51313-02626-The Role of Synthetic Hydrocarbon on Corrosion Behavior of API X65 Carbon Steel in a CO2 Multiphase Flow System

Product Number: 51313-02626-SG
ISBN: 02626 2013 CP
Author: Frederick Pessu
Publication Date: 2013
$20.00
Picture for Corrosion Monitoring of Tied-Arch Bridge Hanger Anchor Systems
Available for download

Corrosion Monitoring of Tied-Arch Bridge Hanger Anchor Systems

Product Number: 51319-12820-SG
Author: C Brossia
Publication Date: 2019
$20.00

Tied-arch bridges are widely used because of its capability of providing clear load path long span and high clearance. However the steel elements of a tied-arch bridge are subject to corrosion which could lead to accidental bridge failure or even collapse when coupled with other bad factors. Hanger anchors as the key elements along the load paths were usually tightly sealed in the anchorages during construction to protect them from corrosion attacks in their service life. This makes it very difficult to manually inspect the corrosion conditions of hanger anchors. Corrosion inspection of hanger anchors has been a blind spot in tied-arch bridge routine maintenance.Corrosion monitoring using different sensorsystems was utilized to provide bridge owners with awareness of possible corrosion of hanger anchors allowing them to make informed maintenance decisions accordingly thus increasing bridge operational safety.
Picture for 96518 HIGH STRENGTH COPPER NICKEL -OPTIMISATION
Available for download

96518 HIGH STRENGTH COPPER NICKEL -OPTIMISATION OF MECHANICAL STRENGTH AND MARINE CORROSION RESISTANCE FOR USE IN NAVAL ARCHITECTURE AND OFFSHORE OIL & GAS

Product Number: 51300-96518-SG
ISBN: 96518 1996 CP
Author: R.J.Grylls, G.W.J.Radford, S.Campbell, D. S.Tuck, K.C.Bendall
$20.00
Picture for Susceptibility to Hydrogen Induced Stress Cracking of Alloy 718 and Alloy 725 Under Cathodic Polarization
Available for download

Susceptibility to Hydrogen Induced Stress Cracking of Alloy 718 and Alloy 725 Under Cathodic Polarization

Product Number: 51315-5597-SG
ISBN: 5597 2015 CP
Author: Gaute Stenerud
Publication Date: 2015
$20.00

 A test project to examine the susceptibility of Hydrogen Induced Stress Cracking (HISC) has been executed. In this project hydrogen charged samples of Alloy 718 and Alloy 725 have been exposed under tensile stress to establish critical stress levels for initiation of HISC.
Picture for 05258 Performance of Corrosion Resistant
Available for download

05258 Performance of Corrosion Resistant Reinforcement as Assessed by Accelerated Testing and Long Term Exposure in Chloride Contaminated Concrete

Product Number: 51300-05258-SG
ISBN: 05258 2005 CP
Author: Diane Lysogorski, Pascal Cros, and William H. Hartt, Florida Atlantic University
$20.00
Picture for 05624 The Effect of Surface Films on Corrosion of
Available for download

05624 The Effect of Surface Films on Corrosion of Carbon Steel in a CO2-H2S-H2O System

Product Number: 51300-05624-SG
ISBN: 05624 2005 CP
Author: Dharma Abayarathna, Ali R. Naraghi, and Shihuai Wang, Champion Technologies, Inc.
$20.00
Picture for 05637 Electrochemical Monitoring of Corrosion in
Available for download

05637 Electrochemical Monitoring of Corrosion in Sour Systems: Fact and Fiction of Electrode Bridging, Fouling and Other Horror Stories

Product Number: 51300-05637-SG
ISBN: 05637 2005 CP
Author: Russell D. Kane and David A. Eden, InterCorr International Inc.
$20.00
Picture for 06082 ELECTROCHEMICAL NOISE STUDY ON THE CORROSION
Available for download

06082 ELECTROCHEMICAL NOISE STUDY ON THE CORROSION OF MAGNESIUM GALVANIC ANODES IN NaCl AND CaSO4-Mg(OH)2 SOLUTIONS

Product Number: 51300-06082-SG
ISBN: 06082 2006 CP
Author: J.Genesca, F. Guadarrama, R. Duran and J. Mendoza
$20.00
Picture for Evaluation of Susceptibility to Exfoliation Corrosion of Aluminum 2060-T8E30 Using Electrochemical T
Available for download

51315-5805-Evaluation of Susceptibility to Exfoliation Corrosion of Aluminum 2060-T8E30 Using Electrochemical Techniques in EXCO and Modified EXCO Solutions

Product Number: 51315-5805-SG
ISBN: 5805 2015 CP
Author: Javier Esquivel
Publication Date: 2015
$20.00
Picture for 05242 Track-to-Earth Resistance, What Does
Available for download

05242 Track-to-Earth Resistance, What Does it Mean?

Product Number: 51300-05242-SG
ISBN: 05242 2005 CP
Author: Edwin Wetzel, Professional Corrosion Service
Publication Date: 2005
$20.00

The development of design levels of track-to-earth resistance has been diluted and misunderstood. This paper will describe development of track-to-earth resistance levels,  examples of differences in systems and extensions, describe the latest technologies and discuss acceptance testing.

 
Picture for Mechanistic Understanding Of Irradiation Assisted Stress Corrosion Cracking
Available for download

Role of Grain Boundary Oxidation in Crack Initiation of Neutron-irradiated Stainless Steel

Product Number: ED22-17333-SG
Author: Srinivasan Swaminathan, Donghai Du, Gary S. Was
Publication Date: 2022
$20.00

Irradiation assisted stress corrosion cracking (IASCC) continues to be a major concern for the
structural integrity of core internals in both pressurized water reactors (PWRs) and boiling water
reactor (BWRs). While factors such as stress, an irradiated microstructure and a high temperature
water environment are required for IASCC, a better understanding of the underlying mechanism
has become a subject of intense long-term research. In the last two decades, much progress has
been made in understanding IASCC susceptibility, though a clear cause-and-effect has yet to be
established on the mechanism of intergranular cracking in highly neutron irradiated stainless steels
in the PWR environment.
What Happens to Zinc Under Hot Insulation?
Available for download

What Happens to Zinc Under Hot Insulation?

Product Number: 41215-883-SG
Author: Bangyih Chen
Publication Date: 2015
$20.00

The polarity of the zinc-steel galvanic couple in hot aqueous solutions was published more than 20 years ago. It used an inorganic zinc primer coating that was applied under thermal insulation at elevated temperatures [30C-60C (86F-140F)].  Since the year 2000, industrial practices or standards do not recommend using inorganic zinc rich coatings under thermal insulation. Research has showed over the years that good practice of corrosion prevention under insulation is to apply an additional layer of a heat resistant modified epoxy or inorganic polymer coating as an additional barrier.
Flexible Measurement Solutions for Industrial Painting and Inspection Applications
Available for download

Flexible Measurement Solutions for Industrial Painting and Inspection Applications

Product Number: 41214-833-SG
Author: Paul Lomax
Publication Date: 2014
$20.00

Structures are made of different substrates and materials. In order to protect these structures from the impact of corrosion, virtually everything is coated with some combination of paints, lacquers, epoxies, and thermoplastics. Inspecting structures requires multiple types of tests including measuring the thickness of a wide variety of protective coatings. This paper will discuss flexible measurement devices and how the utilization of various probes provides the best measurement results for specific applications.
Picture for Effect of Cl? Concentration on Erosion-Corrosion Behavior of 434 Stainless Steel in High-Temperature
Available for download

Effect of Cl? Concentration on Erosion-Corrosion Behavior of 434 Stainless Steel in High-Temperature and High-Pressure CO?-O? Environment

Product Number: 51315-5973-SG
ISBN: 5973 2015 CP
Author: Wei Liu
Publication Date: 2015
$20.00
Picture for 08230 A Pure Ternary High Molybedenum Containing Ni-Cr-Mo Alloy N06059 (Alloy 59), Provides Reliable
Available for download

08230 A Pure Ternary High Molybedenum Containing Ni-Cr-Mo Alloy N06059 (Alloy 59), Provides Reliable Solutions to Various Maintenance & Corrosion Problems in Naval/Marine Applications

Product Number: 51300-08230-SG
ISBN: 08230 2008 CP
Author: Dinesh C. Agarwal
Publication Date: 2008
$20.00
Picture for Wireless UT Sensors For Structural Health Monitoring & Remote Operations In A Post COVID19 World
Available for download

Wireless UT Sensors For Structural Health Monitoring & Remote Operations In A Post COVID19 World

Product Number: 51322-17523-SG
Author: Steve Strachan
Publication Date: 2022
$20.00

For decades, many asset owner/operators across the O&G value chain (and other critical industry segments) of upstream, midstream, & downstream have struggled to identify the root cause of fluctuating corrosion/erosion rates due to unreliable or infrequent data during various operating intervals on their most valuable of assets. This key missing data point has forced mechanical integrity teams, corrosion engineers, inspectors, and operations to, in many cases, make the best guess or hypothesize how to operate with a limited data set of information. In almost all cases, a time-based inspection or maintenance interval is used to gauge the useful lifetime of assets based on this limited data simply because these assets couldn’t give their owners a real-time health diagnostic of how they were doing … until now.
Picture for AMPP TM21549-2024
Available for download

AMPP TM21549-2024, Test Method for Assessing the Impact of an Insulation Material on Corrosion Under Insulation

Product Number: AMPP TM21549-2024
Publication Date: 2024
$109.00

This AMPP standard test method provides a comprehensive methodology to evaluate the relative performance of insulation materials in accelerated and simulated field conditions on bare metal substrates. This test method is intended for use by corrosion control personnel, design engineers, project managers, purchasing personnel, and construction engineers and managers. It is applicable to insulated piping and equipment in industrial applications such as oil and gas gathering, distribution, transmission and refining, power generation, mining, and chemical industries.
Picture for SCC Of Alloy 82 Weld Metal In BWR Water
Available for download

SCC Of Alloy 82 Weld Metal In BWR Water

Product Number: ED22-17242-SG
Author: Peter L. Andresen, Katsuhiko Kumagai
Publication Date: 2022
$20.00

There is extensive evidence from laboratory data and plant experience of the SCC susceptibility of Alloy 82 weld metal in both BWR and PWR environments. Two international expert panels evaluated laboratory data under PWR conditions and created disposition curves to address the effects of stress intensity factor (K), temperature, and other factors. Another expert panel is creating a disposition
curve under BWR conditions for K, temperature, corrosion potential, impurities, and other factors. Nickel alloy weld metals at lower Cr levels (~15% Cr for Alloy 182 and ~20% Cr for Alloy 82) are more susceptible to SCC than weld metals of higher Cr content (~30% Cr for Alloy 52/152). This paper focuses on on-thefly effects on SCC growth rate of Alloy 82 weld metal in BWR environments of corrosion potential, water
purity and temperature.
Picture for 02012 Monitoring and Control in Boilers with...
Available for download

02012 Monitoring and Control in Boilers with All Solid-State Fluorometers

Product Number: 51300-02012-SG
ISBN: 02012 2002 CP
Author: Martin R. Godfrey
$20.00
Picture for On-Site Parameter Measurements And Corrosion Coupon Tests Of Buried Pipeline Subject To AC Interferences Of High Speed Railway
Available for download

On-Site Parameter Measurements And Corrosion Coupon Tests Of Buried Pipeline Subject To AC Interferences Of High Speed Railway

Product Number: 51322-17725-SG
Author: Le Chen, Jianjun Li, Yanxia Du, Nianpei Tian, Jia Liu, Yi Liang
Publication Date: 2022
$20.00

With the rapid development of the economy and acceleration of urban modernization, many high-speed railways and buried pipelines have been built in China. Due to the limitation of space or geographical location, high-speed railways are often constructed in parallel or crossing with long-distance pipelines in some locations. The interference of high-speed railways on pipelines is the result of inductive and conductive coupling, which brings about AC corrosion and other safety issues.
Picture for 98222 INVESTIGATION OF THE INHIBITIVE EFFECT OF
Available for download

98222 INVESTIGATION OF THE INHIBITIVE EFFECT OF N-PHOSPHONO-METHYL-GLYCINE ON THE CORROSION OF CARBON STEEL IN NEUTRAL SOLUTIONS BY ELECTROCHEMICAL TECHNIQUES

Product Number: 51300-98222-SG
ISBN: 98222 1998 CP
Author: M.A. Pech-Canul, L.P. Chi-Canul
$20.00
Picture for Evaluation Stress Corrosion Cracking And Localized Corrosion Influence Of Various Buffer Solutions For Simulated Well Condition
Available for download

Evaluation Stress Corrosion Cracking And Localized Corrosion Influence Of Various Buffer Solutions For Simulated Well Condition

Product Number: 51321-16577-SG
Author: Luciana I. L. Lima; Ilson Palmieri Baptista; Arthur Goncalves; Fabiana Magalhaes Teixeira Mendes; Javier ALejandro Carreno Velasco; Walter Souza; Cecile Millet; Marilia Lima
Publication Date: 2021
$20.00
Picture for Chemistry Change Of CRUD With Various Metal Ion Concentration Conditions In PWR Fuel Cladding
Available for download

Chemistry Change Of CRUD With Various Metal Ion Concentration Conditions In PWR Fuel Cladding

Product Number: ED22-17313-SG
Author: Yunju Lee, Seung Chang Yoo, Junhyuk Ham, Daehyeon Park, Ji Hyun Kim
Publication Date: 2022
$20.00

Since 1960s, CRUD induced problems become an issue in PWR power plant. To enhance economic efficiency of PWR, the burn-ups of nuclear fuel have been increased. In the reactor core, some unexpected power shifts, which shows negative axial offset from prediction, have been observed. This phenomenon is called by AOA (Axial offset Anomaly) and it seems to be caused by deposits on the upper side of fuel cladding surface which is called CRUD.
Picture for Failure Analysis and Investigation Methods of Boiler Tubes Corrosion/Case Study
Available for download

51316-7188-Failure Analysis and Investigation Methods of Boiler Tubes Corrosion/Case Study

Product Number: 51316-7188-SG
ISBN: 7188 2016 CP
Author: hajatolah almasi
Publication Date: 2016
$20.00

The purpose of this study is to investigate the effect of amount of oxygen on corrosion rate of steam loop. Consequently, to eliminate failure, more effective steam quality monitoring concept is recommended.
Picture for Distributed Sacrificial Cathodic Protection – A New Cost Effective Solution to Prevent Corrosion on
Available for download

Distributed Sacrificial Cathodic Protection – A New Cost Effective Solution to Prevent Corrosion on Subsea Structures

Product Number: 51317--8941-SG
ISBN: 8941 2017 CP
Author: Roy Johnsen
Publication Date: 2017
$20.00

In this paper, a new concept named CP by distributed sacrificial anodes (DSA) is presented. The main principle of CP by DSA is to convert cathode area to anode area by distributing anode mass over the surface of the equipment to be protected.
Picture for Pipeline And Subsea Integrity Assessment Using Corrosion Direct Assessment And Local Area Inspection
Available for download

Pipeline And Subsea Integrity Assessment Using Corrosion Direct Assessment And Local Area Inspection

Product Number: 51321-16732-SG
Author: Y. Zheng; M. Mateer; W. J. R. Nisbet; J. Sonke; J.T. Martin; P. B. J. van de Camp
Publication Date: 2021
$20.00

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support