Menu
Search
Filters
Close
Menu

Search and Filter

Toggle Open/Closed
View as
Display per page
14122 total products found.
Picture for Rethinking Sulfide Stress Cracking (SSC) Resistance Super Martensitic Stainless Steel (SMSS-13Cr) Bar Stock With 95 Ksi MY
Available for download

Rethinking Sulfide Stress Cracking (SSC) Resistance Super Martensitic Stainless Steel (SMSS-13Cr) Bar Stock With 95 Ksi MY

Product Number: 51322-17614-SG
Author: Karthik Krishnan, Chad Glaesman
Publication Date: 2022
$20.00

13Cr-5Ni-2Mo type Super Martensitic stainless steels referred to as SMSS-13Cr type grades can provide good general corrosion resistance such as in high CO2 environments combined with higher strengths and excellent toughness2 making them a prospective material choice for long term downhole completion equipment depending on actual well conditions. One of the main limiting factors for the use of SMSS-13Cr type grades is the Sulfide Stress Cracking (SSC) resistance in presence of H2S in downhole well conditions. Therefore, a good understanding of this behavior is essential to facilitate the material selection process. 
Picture for Corrosion Behavior Of Stainless Steel Food Processing Equipment In Low Ph Environments
Available for download

Corrosion Behavior Of Stainless Steel Food Processing Equipment In Low Ph Environments

Product Number: 51322-17783-SG
Author: Suresh Divi, Harbinder Pordal
Publication Date: 2022
$20.00

Food consists mainly of proteins, carbohydrates, and fats. Processed foods contain diverse aqueous solutions, syrups, and additives, used to improve food appearance, taste, quality and preservation. They have a wide pH range, components such as, salt, water, and vinegar impact food corrosivity.
Effects of Scratch Defects in Epoxy Coating of Steel Reinforcing Bars Embedded in Structural Concrete
Available for download

Effects of Scratch Defects in Epoxy Coating of Steel Reinforcing Bars Embedded in Structural Concrete

Product Number: 41216-968-SG
Author: Zhicheng Gao, Robert Y. Liang, Anil K.
Publication Date: 2016
$20.00

Epoxy coatings provide excellent physical barrier to the steel reinforcing bars that are embedded in reinforced concrete and prevent chloride ions from reaching the bar surface under corrosive environment. Such protection primarily depends on the integrity of the coatings, which can often be damaged during construction. Repair of epoxy coatings can be time consuming and expensive. Therefore, it is important to determine a critical amount of damage that can be tolerated without compromising the capacity of the coatings to provide corrosion protection. 
Picture for 96223 CORROSION INHIBITION IN THE PRESENCE
Available for download

96223 CORROSION INHIBITION IN THE PRESENCE OF MICROBIAL CORROSION

Product Number: 51300-96223-SG
ISBN: 96223 1996 CP
Author: Hector A. Videla
$20.00
Picture for Probabilistic Techniques in Corrosion Modelling and Remnant Life Prediction
Available for download

Probabilistic Techniques in Corrosion Modelling and Remnant Life Prediction

Product Number: 51324-20902-SG
Author: Navin S; Nicholas Laycock; Wouter Hamer; Valliappan V; Aswin Venugopal
Publication Date: 2024
$40.00
The Virtual Corrosion Engineer (VCE)(1) platform in Shell uses data from online monitoring of industrial plant process conditions as the input to the best available models for the damage mechanisms applicable to the equipment or components of interest. The primary output is then the corrosion rate or susceptibility to failure, displayed on a continuously updated dashboard in real time. However, for furnaces or heat exchangers with hundreds or thousands of tubes, most components of the input data are properly considered as distributions rather than single point value estimates, and hence the remnant life of the tubes is also best represented as a distribution. This paper shows how Monte-Carlo simulation techniques can be used to address this problem and improve the quality of decision making, using practical examples related to creep damage of furnace tubes in service.
Picture for Pipeline Corrosion and Cathodic Protection 3rd Ed.

Pipeline Corrosion and Cathodic Protection, Third Edition

Product Number: 37778
ISBN: 9780872011496
Author: By M.E. Parker and E.G. Peattie
Publication Date: 1984
$77.00

Field measurements & calculations for cathodic protection (CP) of buried pipelines.  Design.  Soil, potential & current surveys. Rectifier systems. Ground beds. Bond protection. Electrochemistry.  Operation. Maintenance. Inspection. 1984 Gulf
Picture for A Promising Coating of Nanostructured Graphene-Ceria Nanofillers in Polyurethane for Corrosion Prote
Available for download

A Promising Coating of Nanostructured Graphene-Ceria Nanofillers in Polyurethane for Corrosion Protection

Product Number: 51317--9217-SG
ISBN: 9217 2017 CP
Author: Mohammad Mizanur Rahman
Publication Date: 2017
$20.00

In this study a simple method has been applied to fabricate graphene nanocomposite with the inclusion of cerium oxide nanoparticles which can be effectively implemented as a reinforcement material in polyurethane coatings for corrosion protection.
Picture for Screening For Selective Seam Weld Corrosion and Long Seam Anomalies in ERW Pipe Using ILI Data. A Case Study
Available for download

Screening For Selective Seam Weld Corrosion and Long Seam Anomalies in ERW Pipe Using ILI Data. A Case Study

Product Number: 51323-19476-SG
Author: Bernardo Cuervo, Mark McQueen
Publication Date: 2023
$20.00

On July 8th, 1986, an 8-inch pipeline transporting gasoline ruptured in Mounds View, Minnesota. Vaporized gasoline combined with air and liquid gasoline flowed along neighborhood streets. Approximately 30 minutes later, a vehicle entered the area igniting the gasoline vapor.
Picture for Evaluation of Preferential Weld Corrosion Susceptibility and Its Mitigation in Slightly Sour Conditions
Available for download

Evaluation of Preferential Weld Corrosion Susceptibility and Its Mitigation in Slightly Sour Conditions

Product Number: 51315-5640-SG
ISBN: 5640 2015 CP
Author: Ray Case
Publication Date: 2015
$20.00

Preferential Weld Corrosion (PWC) susceptibility was studied in a slightly sour wet gas piping system using electrochemical methods based on the “hockey puck” technique. Several corrosion inhibitors were evaluated to assess their performance in suppressing PWC.
Picture for Dual Functional Corrosion Inhibitor Design And Testing For Top-Of-Line And Bottom Of Line Corrosion
Available for download

Dual Functional Corrosion Inhibitor Design And Testing For Top-Of-Line And Bottom Of Line Corrosion

Product Number: 51322-17787-SG
Author: Larry Chen, Nihal Obeyesekere, Jonathan Wylde, Michael Sim
Publication Date: 2022
$20.00

TOL corrosion is reported to occur in large diameter wet gas pipeline in stratified flow conditions
due to low fluid velocities1. With increasing distance from the inlet, the wet gas pipeline becomes
cooler as it loses heat to the environment. Such cooling causes water, hydrocarbon, and other
high vapor pressure species to condense on the pipe wall. The upper part of the pipe will
constantly be supplied with freshly condensed water while the less corrosive water saturated
with corrosion products will be drained along the pipe wall to the bottom of the line.
Severe Erosion in Pump Casings
Available for download

Severe Erosion in Pump Casings

Product Number: 41213-790-SG
Author: Allen Skaja, David Tordonato, Bobbi Jo Merten
Publication Date: 2013
$20.00

The Bureau of Reclamation has encountered challenges with coatings on pump casings. The casings are exposed to aggressive erosion conditions due to the suspended solids such as sand and debris in the water. 
Picture for Microstructural Investigation of Sour Corrosion Phenomena in UNS C72900
Available for download

51318-11322-Microstructural Investigation of Sour Corrosion Phenomena in UNS C72900

Product Number: 51318-11322-SG
Author: William Kovacs III / Liu Cao / Kavitha Tummala / Fritz Grensing / Robert Kusner / Carole Trybus / Carolyn Curran
Publication Date: 2018
$20.00

Sour corrosion phenomena observed in laboratory testing as it related to the microstructural features of UNSC72900. This was investigated through a parametric study of varying temperature and levels of H2S and chloride.
Picture for Integrating Real Time Corrosion Measurements with Process Data Using Plantweb Insight
Available for download

Integrating Real Time Corrosion Measurements with Process Data Using Plantweb Insight

Product Number: 51321-16275-SG
Author: William Fazackerley
Publication Date: 2021
$20.00
Picture for Corrosion Of Mild Steel In Concentrated Monoethylene Glycol (MEG)
Available for download

Corrosion Of Mild Steel In Concentrated Monoethylene Glycol (MEG)

Product Number: 51321-16701-SG
Author: Marion Seiersten
Publication Date: 2021
$20.00

The thermodynamic hydrate inhibitor MEG is a robust choice for long distance gas-condensate tie-backs operating at low temperature. The possibility to regenerate and recycle the MEG enables cost effective operation with low discharges. The choice of regeneration process depends on the salt content of the produced water.
Picture for Monitoring AC Interference and Corrosion on High-pressure Pipeline
Available for download

51315-5470-Monitoring AC Interference and Corrosion on High-pressure Pipeline

Product Number: 51315-5470-SG
ISBN: 5470 2015 CP
Author: Ian Thompson
Publication Date: 2015
$20.00
Picture for 05157 Critical Review: Fas Assessment Methods for
Available for download

05157 Critical Review: Fas Assessment Methods for Crack-Like Flaws in Pipelines

Product Number: 51300-05157-SG
ISBN: 05157 2005 CP
Author: Ming Gao, Richard McNealy, and Jose Loris, GE Energy; Ravi M. Krishnamurthy, Blade Energy Partners
Publication Date: 2005
$20.00

Currently, a number of fracture mechanics-based methods are available for crack assessment. In this paper, a critical review is given to failure assessment diagram (FAD), in particular the API 579-2000 fracture mechanics assessment method for crack-like flaws. Illustrations, arranged by applicability to field examples, demonstrate the approach.
Picture for Monitoring Evaluating and Control of Corrosion and Scaling in Higher Pressure Industrial Boilers
Available for download

Monitoring Evaluating and Control of Corrosion and Scaling in Higher Pressure Industrial Boilers

Product Number: 51317--8988-SG
ISBN: 8988 2017 CP
Author: John Kelly
Publication Date: 2017
$20.00

The author has utilized two types of instruments in conducting hydrogen studies. Hydrogen analyzers are used extensively in both the laboratory and in industrial steam generating plants.  This is a collection of five case studies.
Picture for Data Integration Techniques to Support Meaningful Visualization of Corrosion Data
Available for download

51318-11007-Data Integration Techniques to Support Meaningful Visualization of Corrosion Data

Product Number: 51318-11007-SG
Author: Joshua Greer
Publication Date: 2018
$20.00

Specifically, the paper examines the key first step in visualizing corrosion data: integrating different types of data from different sources into a single system by using spatial components within each dataset to correlate the information.
The United States Marine Corps (USMC) Corrosion Prevention and Control (CPAC) Program
Available for download

The United States Marine Corps (USMC) Corrosion Prevention and Control (CPAC) Program

Product Number: 41213-780-SG
Author: Matthew Koch, Andrew Sheetz, John Repp
Publication Date: 2013
$20.00

The USMC CPAC Program provides a holistic approach to corrosion engineering on ground vehicles. This starts with the acquisition of a new system, where CPAC will work with the Program Manager (PM) to develop the contractual requirements for corrosion prevention and aid in the evaluation and verification of an Original Equipment Manufacturer (OEM) to meeting those requirements. 
Picture for Investigation On The Localized Corrosion Performance Of Lean Duplex Stainless Steels In Urban Wastewater Treatment Plants
Available for download

Investigation On The Localized Corrosion Performance Of Lean Duplex Stainless Steels In Urban Wastewater Treatment Plants

Product Number: 51322-17756-SG
Author: Audrey Allion, Nicolas Larché, Dominique Thierry, Benoît Emo, Elisabeth Johansson
Publication Date: 2022
$20.00

Wastewater coming from both municipal and industrial activities present corrosive properties toward metals and can in certain cases exceed the tolerances of the most often used stainless steels such as 304L and 316L, thus resulting in the need of superior alloys. The main factors influencing the corrosiveness of the fluids in wastewater treatment plants are high concentration of halides (more specifically chlorides), H2S, low pH, temperature and their combined action. Corrosiveness of incoming fluids at a municipal wastewater treatment finds its roots in the municipal collection network.
Picture for Corrosion of Stainless Steels 2nd Edition

Corrosion of Stainless Steels, Second Edition

Product Number: 37796
ISBN: 9780471007920
Author: By A. John Sedriks
$202.00
Picture for 05188 Role of Alkalization in AC Induced Corrosion
Available for download

05188 Role of Alkalization in AC Induced Corrosion of Pipelines and Consequences Hereof in Relation to CP Requirements

Product Number: 51300-05188-SG
ISBN: 05188 2005 CP
Author: Lars Vendelbo Nielsen, MetriCorr Aps
Publication Date: 2005
$20.00

In the present paper, characteristics of the AC corrosion problem are demonstrated using laboratory results and field measurements as examples.  Evidence has been given that the AC corrosion mechanisms involve alkalization of the environment nearby the coating defect, and in combination with AC, corrosion may be induced. 
Picture for Coatings Used in Conjunction with Cathodic Protection - Shielding vs NonShielding Pipeline Coatings
Available for download

Coatings Used in Conjunction with Cathodic Protection - Shielding vs NonShielding Pipeline Coatings

Product Number: 41212-693-SG
Author: Richard Norsworthy
Publication Date: 2012
$20.00

When using cathodic protection on coated pipelines, end users must consider the problems that exist if the coating disbonds (loses adhesion).  Many in the pipeline industry assume cathodic protection will solve their external corrosion problems without truly understanding the relationship between the coating and cathodic protection.  
Picture for Direct Calculation of Economic Appraisals of Corrosion Control Measureas
Available for download

RP0272-1972, Direct Calculation of Economic Appraisals of Corrosion Control Measures

Product Number: 53009-HD1972
Author: NACE
Publication Date: 1972
$179.00

The choice of corrosion control measures must consider economic factors as well as technical aspects.  Methods here presented are tools of engineering and management decision making. Historical Document 1972
Picture for 11353 Timescale Correlation Between Marine Atmospheric Exposure and Accelerated Corrosion Testing
Available for download

11353 Timescale Correlation Between Marine Atmospheric Exposure and Accelerated Corrosion Testing

Product Number: 51300-11353-SG
ISBN: 2011 11353 CP
Author: Eliza L. Montgomery, Jerome P. Curran, Luz M. Calle and Mark R. Kolody
Publication Date: 2011
$20.00

Evaluation of metal-based structures has relied on atmospheric exposure test sites to determine corrosion resistance in marine environments. This work uses surface chemistry and electrochemical techniques to interpret the chemical changes occurring on low carbon and stainless steel during atmospheric and accelerated corrosion conditions to find a correlation between its accelerated and long-term corrosion performance.
Picture for Formation of Galvanic Cells and Localized Corrosion under Atmospheric Conditions
Available for download

51316-7212-Formation of Galvanic Cells and Localized Corrosion under Atmospheric Conditions

Product Number: 51316-7212-SG
ISBN: 7212 2016 CP
Author: Dominique Thierry
Publication Date: 2016
$20.00

The aim of this study was to determine the mechanism of atmospheric corrosion of zinc in areas of local NaCl contamination and to define the driving force of spreading of electrochemical reactions using Scanning Kelvin Probe (SKP).
Picture for Exfoliation and Intergranular Corrosion of Aluminum Plastics Molds
Available for download

51318-11175-Exfoliation and Intergranular Corrosion of Aluminum Plastics Molds

Product Number: 51318-11175-SG
Author: James Dillon
Publication Date: 2018
$20.00

Case histories will be presented that illustrate the exfoliation corrosion mechanism and the problems that occur in plastics manufacturing systems. Methods for control of corrosion in these systems will be proposed.
Picture for The Promise of a Holistic Digital Strategy for Corrosion and Integrity Management
Available for download

51318-10831-The Promise of a Holistic Digital Strategy for Corrosion and Integrity Management

Product Number: 51318-10831-SG
Author: Cecilie A. Haarseth / David A. Norman
Publication Date: 2018
$20.00

 An overview and possible methods to capture the full potential of digital technologies for corrosion and integrity management with a focus on upstream pipelines. Considering current industry offerings but also potential new technologies.
Picture for Effect of Iron Sulfide Deposits on Sour Corrosion of Carbon Steel
Available for download

51316-7313-Effect of Iron Sulfide Deposits on Sour Corrosion of Carbon Steel

Product Number: 51316-7313-SG
ISBN: 7313 2016 CP
Author: Jon Kvarekval
Publication Date: 2016
$20.00

The corrosive effects of iron monosulfide deposited on carbon steel surfaces were investigated in  autoclave experiments. The H2S and CO2 partial pressures were 1 to 20 bar.  Temperatures were 10-120 °C. The test solutions consisted of high-salinity brine and low-salinity condensed water. Typical duration was 14 days. Weight loss and localized corrosion data were obtained.
Polyasparartic Ester Finish Coats - A New Generation
Available for download

Polyasparartic Ester Finish Coats - A New Generation

Product Number: 41208-440-SG
Author: Mike O’Donoghue, Ron Garrett, V.J. Datta, Justin Dunn
Publication Date: 2008
$20.00

Recent advances in the realm of polyaspartic ester finish coat technology have led to significant improvements in their aesthetic and corrosion resistance properties. Of particular interest is an initial comparison of the aesthetic properties of older and new generation polyaspartic ester finishes with both polyurethanes and isocyanate-free polysiloxane finishes.  
Picture for 99058 HOT CORROSION IN A TEMPERATURE GRADIENT
Available for download

99058 HOT CORROSION IN A TEMPERATURE GRADIENT

Product Number: 51300-99058-SG
ISBN: 99058 1999 CP
Author: Gordon R. Holcomb
$20.00
Development of Methodologies for Continuous and Batch Inhibitor Film Persistency Investigation in the Laboratory
Available for download

Development Of Methodologies For Continuous And Batch Inhibitor Film Persistency Investigation In The Laboratory

Product Number: 51322-18056-SG
Author: Mengqiu Pan, Kasra Shayar Bahadori, Maryam Eslami, Bruce Brown, Marc Singer
Publication Date: 2022
$20.00

Application of corrosion inhibitors confer many advantages for combatting internal pipeline corrosion in the upstream oil and gas industry. It is known that the associated costs for using corrosion inhibitors are low compared to other mitigation techniques [1]. For continuous injection procedures, water-soluble inhibitors are not expected to form long-lasting films, so they must be continuously injected to maintain their effectiveness. Batch inhibitors are usually higher molecular weight species and oil soluble. They tend to be more tenacious, providing a protective barrier between the water and the metal over a long period of time.
Picture for Corrosion Behavior Of UNS S31600 In Purified Molten Salts
Available for download

Corrosion Behavior Of UNS S31600 In Purified Molten Salts

Product Number: 51321-16945-SG
Author: Chi Ying Loh; Jared O. Butner; Connor J. Veronese; Christopher J. Faraj; Chi Ying Loh; Jared O. Butner; Connor J. Veronese; Christopher J. Faraj; Vilupanur A. Raviilupanur A. Ravi
Publication Date: 2021
$20.00
Corrosion Properties Of UNS S83071, Super Duplex Stainless Steel With High Acid Corrosion Resistance
Available for download

Corrosion Properties Of UNS S83071, Super Duplex Stainless Steel With High Acid Corrosion Resistance

Product Number: 51322-17925-SG
Author: Oscar Öhlin, Daniel Gullberg
Publication Date: 2022
$20.00

Austenitic-ferritic stainless steels, commonly known as duplex stainless steels (DSSs), are a group of materials typically consisting of equal amounts austenite and ferrite. DSSs are well-known materials in chemical industry and are often a cost-effective alternative as they combine high mechanical strength and fatigue resistance with good corrosion properties. Contributing to the cost-effectiveness is the low nickel content compared to austenitic stainless steels. Advantages with DSSs are high chloride stress corrosion cracking resistance (SCC), where austenitic steels with moderate nickel content are inherently more sensitive. In combinations with carbon steel it can be a benefit to use DSSs since carbon steel and DSSs have matching thermal expansion. 
Picture for 07114 Stress Corrosion Cracking of Nitronic 60 STAB
Available for download

07114 Stress Corrosion Cracking of Nitronic 60 STAB

Product Number: 51300-07114-SG
ISBN: 07114 2007 CP
Author: Fatima Cunha and Annelise Zeemann
Publication Date: 2007
$20.00

Case Study: These lines, which are operating in about 500 Completion Risers Joints for more than 3 years exposed to a mixture of seawater, mud, oil and eventually products of acidification in the annular space , have shown good performance except for an unusual case of cracking of the Nitronic stab.
Picture for Atmospheric Corrosion Resistance of Stainless Steel in Middle East: Result of Field Exposure Program
Available for download

Atmospheric Corrosion Resistance of Stainless Steel in Middle East: Result of Field Exposure Program

Product Number: 51317--8964-SG
ISBN: 8964 2017 CP
Author: Sukanya Mameng
Publication Date: 2017
$20.00

A marine site and a semi-marine site in the UAE and a rural site in Saudi Arabia were selected in this study. The field test results compare the atmospheric corrosion resistance of eight different stainless steel grades
Picture for Assessment of Ammonium Chloride Corrosion in Refinery Crude Distillation Unit Overhead Conditions
Available for download

Assessment of Ammonium Chloride Corrosion in Refinery Crude Distillation Unit Overhead Conditions

Product Number: 51324-21131-SG
Author: H. Li; Y. Yoon; Russell D. Kane
Publication Date: 2024
$40.00
The corrosion in crude unit overhead systems, specifically related to acidic attack and under-deposit corrosion caused by salt formation, has been extensively documented in both industry and literature. However, the absence of comprehensive corrosion data correlating critical environmental and flow variables has posed challenges in evaluating corrosion and selecting appropriate materials. To address this issue, a Joint Industry Program (JIP) was conducted with the primary objective of generating engineering data on the corrosion behavior of commonly used construction materials in atmospheric overhead systems of refinery crude distillation units (CDU-OH). The study focused on investigating the effects of HCl, NH3, NH4Cl, H2O, and H2S in the presence of ammonium chloride, aiming to identify key parameters associated with three prevalent forms of corrosion: under-deposit, water dew point, and aqueous corrosion. Through meticulous thermodynamic modeling and corrosion evaluations performed in simulated environments that accurately represented relevant conditions, the impact of these key parameters on the corrosion of six frequently used materials of construction—namely, carbon steel, 410 stainless steel, Alloy 400, Titanium, Alloy 625, and Alloy C-276—was rigorously evaluated. The corrosion rates of these materials under various test conditions were quantified, leading to the development of a corrosion prediction model. This model serves as a valuable tool for determining conditions for ammonium chloride-induced corrosion in CDU-OH systems, aiding in the assessment and decision-making processes pertaining to material selection.
Picture for 02276 WHY CORROSION INHIBITORS DO NOT...
Available for download

02276 WHY CORROSION INHIBITORS DO NOT PERFORM WELL IN SOME MULTIPHASE CONDITIONS: A MECHANISTIC STUDY

Product Number: 51300-02276-SG
ISBN: 02276 2002 CP
Author: Hongbin Wang, Hongwei Wang, Hua Shi, Cheolho Kang, and Paul W. Jepson
Publication Date: 2002
$20.00

Results of inhibitor performance at slug flow in a 101.6 mm inner diameter horizontal pipeline. Electrochemical Impedance Spectroscopy (EIS) and scanning electrom microscope (SEM) techniques are used to reveal that the strong bubble impact, high shear stress and turbulent intensity are the reasons for a poor performance of inhibitor.
Picture for Stress-Corrosion Cracking Direct Assessment of Carbon Steel Pipelines Using Advanced Eddy Current Ar
Available for download

51318-11150-Stress-Corrosion Cracking Direct Assessment of Carbon Steel Pipelines Using Advanced Eddy Current Ar

Product Number: 51318-11150-SG
Author: Angélique Raude / Mathieu Bouchard / Michael Sirois
Publication Date: 2018
$20.00

Development of a solution and its application on carbon steel pipelines for the detection and sizing of Stress corrosion cracking (SCC). Potential to replace MPI and UT as the industry gold standard for SCC detection and sizing.
Picture for Biocide Injection to Eliminate the Risk of Bacterial Growth and Corrosion Failure in Non Internal Co
Available for download

51316-7117-Biocide Injection to Eliminate the Risk of Bacterial Growth and Corrosion Failure in Non Internal Coated Pressure Safety Valve from an Eocene Sub Centre at Partitioned Zone (Kingdom of Saudi Arabia and Kuwait). – A Case Study

Product Number: 51316-7117-SG
ISBN: 7117 2016 CP
Author: Hamed Al-Shammary
Publication Date: 2016
$20.00

The case study demonstrates different approaches towards what went wrong and why on pressure safety valve susceptible to MIC growth. The Eocene Sub Centre-1 Shipping Pump discharge header connected pressure safety valve (01PSV172) reported leaking from the body and POD requested Asset Integrity Division to conduct Root Cause Analysis with recommendation.
Picture for Corrosion in Amine Reclaimer System
Available for download

51314-4222-Corrosion in Amine Reclaimer System

Product Number: 51314-4222-SG
ISBN: 4222 2014 CP
Author: Jeevanandam Shanmugam
Publication Date: 2014
$0.00
Picture for 03398 SELECTIVE CORROSION IN DUPLEX STAINLESS
Available for download

03398 SELECTIVE CORROSION IN DUPLEX STAINLESS STEEL

Product Number: 51300-03398-SG
ISBN: 03398 2003 CP
Author: Wen-Ta Tsai, Kuen-Ming Tsai, Changjan Lin
$20.00
Picture for The Importance of Developing Leadership Competency in Corrosion Management
Available for download

The Importance of Developing Leadership Competency in Corrosion Management

Product Number: 51323-19477-SG
Author: Zoe Coull, Noelia Diaz, Muan Wei
Publication Date: 2023
$20.00

Leadership is the ability to motivate and inspire people towards achieving a positive change. Leadership starts with an awareness of self and is driven by a deep understanding of both personal values and the values of wider teams and organizations.


Often leadership is confused with the skill of management, which is defined here as the ability to develop and action structured plans, processes, procedures to achieve required outcomes within defined constraints and with specific resources.
Picture for SP0775-2013"Preparation, Installation, Analysis, and Interpretation of Corrosion Coupons in Oilfield Operations"
Available for download

SP0775-2013-HD2013-SG "Preparation, Installation, Analysis, and Interpretation of Corrosion Coupons in Oilfield Operations"

Product Number: 21017-HD2013
ISBN: 1-57590-086-6
Publication Date: 2013
$179.00

Uniform, industry-proven methods to monitor corrosion in oil production systems. Preparing, analyzing, and installing corrosion coupons.  Corrosion rate calculations and typical data recording form included.
Picture for Corrosion Resistance of High Strength UNS S31010 High Nitrogen Stainless Steel
Available for download

51318-11161-Corrosion Resistance of High Strength UNS S31010 High Nitrogen Stainless Steel

Product Number: 51318-11161-SG
Author: Luca Foroni / Louis Lherbier / Carlo Malara
Publication Date: 2018
$20.00

High strength UNS S31010 with 140 ksi MYS has been produced by warm work hardening and cold work hardening. The characterization of high strength alloy with respect to corrosion resistance is discussed in this paper.
Picture for Development of a Reference Electrode for Study of Supercritical CO2 Corrosion
Available for download

51318-11073-Development of a Reference Electrode for Study of Supercritical CO2 Corrosion

Product Number: 51318-11073-SG
Author: Chin-Hua Cheng / Jing Ning / Raymundo Case
Publication Date: 2018
$20.00

Two methods to prepare tungsten/tungsten oxide as reference electrode for performing electrochemical measurements in H2O-saturated super critical (SC) CO2 phase
Picture for ANSI-NACE TM0416-2023-ISO 22858-2020, Corrosion of metals and alloys — Electrochemical measurements — Test method for monitoring atmospheric corrosion
Available for download

ANSI/NACE TM0416-2023/ISO 22858:2020, Corrosion of metals and alloys — Electrochemical measurements — Test method for monitoring atmospheric corrosion

Product Number: ANSI-NACE TM0416-2023-ISO 22858-2020
$140.00

The purpose of this document is to provide instructions on the use of electrochemical sensors for monitoring atmospheric corrosion. These sensors are used to measure thin film electrolyte conductance, corrosion current or coating condition over long periods. This method permits the instantaneous evaluation of corrosion current that can be related to specific environmental conditions in real time. The instantaneous corrosion current measurements are not accessible using electrical resistance sensors or mass loss techniques. The technology described in this document complements other standard techniques for assessing atmospheric corrosion such as mass loss coupons, electrical resistance sensors or coated test panels (see ISO 8407 and ISO 4628-8). These continuous records of material condition can be useful for studying atmospheric corrosion, evaluating materials or managing assets.
Picture for Sustainable Corrosion Management for the Electric Power Industry
Available for download

Sustainable Corrosion Management for the Electric Power Industry

Product Number: 51317--9438-SG
ISBN: 9438 2017 CP
Author: Gerhardus Koch
Publication Date: 2017
$20.00

A system approach for cost-effective corrosion controls by incorporating corrosion management into a company’s existing systems. It will improve communication, resourcing, and funding allocation such that corrosion control investments result in positive returns while minimizing costly failures.

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support