Menu
Search
Filters
Close
Menu

Search and Filter

Toggle Open/Closed
View as
Display per page
14122 total products found.
Picture for Comparing in-situ Methods for Monitoring Effectiveness of Biocide Treatment
Available for download

Comparing in-situ Methods for Monitoring Effectiveness of Biocide Treatment

Product Number: 51317--9114-SG
ISBN: 9114 2017 CP
Author: Sabine Doddema
Publication Date: 2017
$20.00

In this paper we describe a case study in which we compared several available methods including viabilitypolymerase chain reactionfor measuring the effectiveness of biocide treatment.
From 6Mo To Ni-Base – Characterizing The Corrosion Performance Of Two Important Material Groups
Available for download

From 6Mo To Ni-Base – Characterizing The Corrosion Performance Of Two Important Material Groups

Product Number: 51322-17935-SG
Author: Björn Helmersson
Publication Date: 2022
$20.00

Stainless steels and Ni-base alloys are often considered as construction materials in applications where highly corrosive conditions are expected. High levels of halides, low pH and high temperatures are factors that often contribute to the selection of such materials.

Ten different alloys have been included in this work, representing a range of highly alloyed stainless steels and Ni-base alloys. The purpose has been to evaluate the corrosion resistance of stainless steels with alloying content in the 6Mo range or higher, and competing Ni-base materials. The austenitic grade N08904 and two super-duplex grades have also been included for reference. 
Picture for Prediction And Mitigation Of Top Of Line Corrosion Risk Due To Damages In External Pipeline Coating
Available for download

Prediction And Mitigation Of Top Of Line Corrosion Risk Due To Damages In External Pipeline Coating

Product Number: 51321-16789-SG
Author: Marc Singer, Nick Bardsley, Julie Morgan, Stuart Kegg, Adam Darwin, Peter Cossins, Anthony Kwong, Jason Biddlecombe, Jo Yetman, Joe Bullen
Publication Date: 2021
$20.00

A visual inspection of a subsea field development, transporting wet gas, containing approximately 1.5 to 2 mol% of CO2 to shore, was conducted via ROV (remotely operated vehicle). The pipeline system is largely carbon steel with only short lengths of CRA (corrosion resistant alloy) piping from the wellhead to the production/pigging manifold. Downstream of the pigging manifold the system has 20” carbon steel spools leading to the FTA (flowline termination assembly) and then 20” carbon steel flowlines to the riser platform.
Picture for Electrochemical Behavior of the Prestressing Steel in Alkaline Electrolytes:Influence of Cement Type
Available for download

51314-4145-Electrochemical Behavior of the Prestressing Steel in Alkaline Electrolytes:Influence of Cement Type

Product Number: 51314-4145-SG
ISBN: 4145 2014 CP
Author: Ioan PEPENAR
Publication Date: 2014
$20.00
Picture for 10305 316 Stainless Steel Instrument Tubing in Marine Applications
Available for download

10305 316 Stainless Steel Instrument Tubing in Marine Applications

Product Number: 51300-10305-SG
ISBN: 10305 2010 CP
Author: Ardjan Kopliku and Conchita Mendez
Publication Date: 2010
$20.00

Field experience was studied to identify the best solutions to Localized corrosion of 316 stainless steel instrument and chemical injection tubing in marine environment. Laboratory tests and exposure in marine environment of samples have been used to evaluate possible alternative materials and protective chemicals.
Picture for The Effect of High Partial Pressure of CO2 on the Corrosion Mechanism of Carbon Steel in H2O-CO2 Systems
Available for download

51318-11623-The Effect of High Partial Pressure of CO2 on the Corrosion Mechanism of Carbon Steel in H2O-CO2 Systems

Product Number: 51318-11623-SG
Author: Tatiana C. Almeida / Oscar R. Mattos / Rogaciano M. Moreira / Merlin C. E. Bandeira
Publication Date: 2018
$20.00

The corrosion mechanism of X65 carbon steel was evaluated in water environment by increasing CO2 partial pressure from 1 bar at 24 °C to 110 bar at 40 °C, reaching conditions that include water saturated with supercritical CO2.
Picture for A Corrosion Fatigue (CF) Assessment Method for High-stressed Engine Components in Corrosive Fuels
Available for download

A Corrosion Fatigue (CF) Assessment Method for High-stressed Engine Components in Corrosive Fuels

Product Number: 51317--9001-SG
ISBN: 9001 2017 CP
Author: Sven Kaefer
Publication Date: 2017
$20.00

To investigate the corrosive impact of fuels with biogenic components by performing corrosion fatigue tests on notched and un-notched specimen of stainless 17% chromium steel 1.4016 (X6Cr17) AISI430 in air and biofuel E85 ­(fuel with 85% ethanol added).
Picture for Effect of Elements Mo and W on Humidity Corrosion of Low Alloy Steels in H2S-Containing Environment
Available for download

51316-7319-Effect of Elements Mo and W on Humidity Corrosion of Low Alloy Steels in H2S-Containing Environment

Product Number: 51316-7319-SG
ISBN: 7319 2016 CP
Author: Wei Liu
Publication Date: 2016
$20.00

The effect of Tungsten (W) and Molybdenum (Mo) on the corrosion behavior of low alloy steels exposed to acid humidity corrosion environment containing O2, H2S, and CO2 was investigated using weight loss, scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and electrochemical measurements.
Picture for Molecular Microbiological Methods to Investigate Microbial Influenced Corrosion in Fully Integrated
Available for download

51316-7278-Molecular Microbiological Methods to Investigate Microbial Influenced Corrosion in Fully Integrated Kraft Pulp and Paper Mills

Product Number: 51316-7278-SG
ISBN: 7278 2016 CP
Author: Dora Ogles
Publication Date: 2016
$20.00

Corrosion in modern paper mills accounts for 30+% of maintenance expenses. Molecular microbiological methods (MMM): • Quantitative polymerase chain reaction (qPCR) and QuantArray were employed to examine MIC at four paper mills each with unique process characteristics and construction materials in the affected areas. 
Picture for 98195 CONTROL OF EROSIVE WEAR IN CORROSIVE
Available for download

98195 CONTROL OF EROSIVE WEAR IN CORROSIVE ENVIRONMENTS USING EROSION-CORROSION MAPS: POTENTIAL APPLICATIONS TO FOSSIL FUEL ENVIRONMENTS.

Product Number: 51300-98195-SG
ISBN: 98195 1998 CP
Author: M.M. Stack
$20.00
Picture for Acquisition Visualization and Interpretation of Pipeline Corrosion Monitoring Data
Available for download

51318-10942-Acquisition Visualization and Interpretation of Pipeline Corrosion Monitoring Data

Product Number: 51318-10942-SG
Author: Jigneshkumar J. Desai / Ashik S. Murthy / Cathleen Shargay
Publication Date: 2018
$20.00

An overview of some of recent progresses in monitoring corrosion using probes/sensors as a practical means of acquiring in-situ and site-specific data from ‘invisible’ underground structures such as oil & gas pipelines
Picture for The Virginia Tech High Turbulence Corrosion Loop
Available for download

51317--9748-The Virginia Tech High Turbulence Corrosion Loop

Product Number: 51317--9748-SG
ISBN: 9748 2017 CP
Author: Robert Hendricks
Publication Date: 2017
$20.00

It is possible to design, construct, and perform experiments with a modular corrosion loop allowing a detailed investigation of corrosion processes. The instrument described in this paper was aimed at validating the experimental concept via testing a material that is susceptible to erosion-corrosion.

 
Picture for The Virtual Corrosion Engineer For Soil Side Corrosion Prediction And Cathodic Protection Status Monitoring
Available for download

The Virtual Corrosion Engineer For Soil Side Corrosion Prediction And Cathodic Protection Status Monitoring

Product Number: 51322-17677-SG
Author: Vishnu Sivadasan, Emad Daher, Tom Bos, Nicholas Laycock
Publication Date: 2022
$20.00

Corrosion is a ubiquitous phenomenon, which can have massive impacts on the functioning of industrial assets. The threat of corrosion is exacerbated in situations where regular corrosion inspections are difficult. The Virtual Corrosion Engineer (VCE) Project within Shell is intended to offer a solution to this problem by automatically assessing the corrosion rates and threat levels in assets due to a variety of corrosion mechanisms. The VCE system has been deployed in an asset progressively since 2019.
Picture for Embrittlement of MP35N (UNS R30035) Springs in Simulated Downhole Production and Acid Treatment Envi
Available for download

51312-01156-Embrittlement of MP35N (UNS R30035) Springs in Simulated Downhole Production and Acid Treatment Envi

Product Number: 51312-01156-SG
ISBN: 01156 2012 CP
Author: Karthik Krishnan
Publication Date: 2012
$20.00
Picture for 01082 CORROSION PROPERTIES OF 3% CR STEELS
Available for download

01082 CORROSION PROPERTIES OF 3% CR STEELS IN OIL AND GAS ENVIRONMENTS.

Product Number: 51300-01082-SG
ISBN: 01082 2001 CP
Author: Perry Ian Nice, John Martin, Koichi Nose and Hitoshi Asahi
$20.00
Galvanic Corrosion in Water & Wastewater Structures: Coupling Stainless and Carbon Metals Leads to Accelerated Corrosion
Available for download

Galvanic Corrosion in Water & Wastewater Structures: Coupling Stainless and Carbon Metals Leads to Accelerated Corrosion

Product Number: 41214-840-SG
Author: Vaughn O’Dea, Travis C. Tatum, Pat Barry, Paul B. Higgins
Publication Date: 2014
$20.00

Stainless steel is selected for use in the municipal waterworks industry because of its inherent corrosion resistance properties.  Designers oftentimes overlook the associated problems with coupling stainless steel with carbon steel metals. When these materials are electrically connected and placed into aqueous environments (immersion service) accelerated corrosion of the anodic carbon steel metal is initiated. 
Picture for 03252 CORROSION PROTECTION FOR BOLTING
Available for download

03252 CORROSION PROTECTION FOR BOLTING IN MARINE ENVIRONMENTS

Product Number: 51300-03252-SG
ISBN: 03252 2003 CP
Author: KEN STEVENS, K. DANIEL EFtRD
Publication Date: 2003
$20.00

The nut and bolt thread protector system is a patented, ultraviolet stabilized polyethylene thread protector, which seals nut and bolt threads in pressurized grease to effectively prevent corrosion and provide protection against physical damage.
Picture for Moisture Management In Thermal Insulations For In-Service And Out Of Service Pipelines
Available for download

Moisture Management In Thermal Insulations For In-Service And Out Of Service Pipelines

Product Number: 51322-17594-SG
Author: Ahmad Raza Khan Rana, Graham Brigham
Publication Date: 2022
$20.00

Thermally insulated pipelines have wide networks globally that are used to transport various chemicals, hydrocarbons as well as steam. CUI (corrosion under insulation), external SCC (stress corrosion cracking) and corrosion fatigue are some of the prominent damage mechanisms which may occur on the external surface of insulated pipes/ pipelines that in turn jeopardize the long-term integrity and operations. The moisture is undoubtedly the key contributor behind the above said external degradations of metallic surfaces and can come under thermal insulations via seepage and/ or condensation. Various factors that influence the extent of moisture intrusion are the design of insulated system(s), type and age of insulation, operating temperature of pipeline(s) as well as environmental and neighborhood conditions.
Air-Drying Waterborne One-Pack Coatings For Corrosion Protection
Available for download

Air-Drying Waterborne One-Pack Coatings For Corrosion Protection

Product Number: 41213-767-SG
Author: Michaela Zirngast, Roland Feola, Florian Lunzer
Publication Date: 2013
$20.00

Corrosion can seriously damage the substrate and can lead to significant repair or replacement costs. Good corrosion protection for metal coatings is traditionally achieved through two component (2K) systems. However, they show certain disadvantages that do not exist for one component (1K) systems. 
Picture for Role of Hydrogen in Intergranular Corrosion of AA2024 Aluminium Alloy: An AFM-KFM Study
Available for download

Role of Hydrogen in Intergranular Corrosion of AA2024 Aluminium Alloy: An AFM-KFM Study

Product Number: 51317--9464-SG
ISBN: 9464 2017 CP
Author: Christine BLANC
Publication Date: 2017
$20.00

A powerful way to study hydrogen embrittlement at a local scale is by Scanning Kelvin Probe Force Microscopy (SKPFM). This technique by measuring the surface potential at the nanometer scale allows the detection and localization of hydrogen in the alloy.
Picture for 11015 Factors Affecting the Corrosion Rate at Intersection Points of Steel Rebar Mat
Available for download

11015 Factors Affecting the Corrosion Rate at Intersection Points of Steel Rebar Mat in Reinforced Concrete Structures

Product Number: 51300-11015-SG
ISBN: 2011 11015 CP
Author: Dr. Raja Rizwan Hussain, Abdulrahman Alhozaimy, Rajeh Al Zaid and Abdulaziz Al Negheimish
Publication Date: 2011
$20.00
Picture for Role of Major and Minor Alloying Elements in CRAs to Localized Corrosion Inhibition: A Review
Available for download

51318-11330-Role of Major and Minor Alloying Elements in CRAs to Localized Corrosion Inhibition: A Review

Product Number: 51318-11330-SG
Author: Ajit Mishra
Publication Date: 2018
$20.00

This study reviews the localized corrosion performance of corrosion-resistant alloys and high-temperatures alloys containing varying amount of Cr, Mo and W, using both quantitative and surface characterization techniques.
Picture for Corrosion Control of a Hydrocracking Unit Debutanizer Overhead System
Available for download

51316-7273-Corrosion Control of a Hydrocracking Unit Debutanizer Overhead System

Product Number: 51316-7273-SG
ISBN: 7273 2016 CP
Author: OMAR ALABDULGADER
Publication Date: 2016
$20.00

A Corrosion Control Plan was developed for a Debutanizer Overhead System, which had suffered from high corrosion rates and multiple leaks. This paper will outline the efforts undertaken and conclude with the Corrosion Control Plan, developed to enhance reliability and availability of the unit and mitigate corrosion damage.

Picture for Corrosion and Its Control: An Introduction to The Subject, 2nd Edition (e-Book)
Available for download

Corrosion and Its Control: An Introduction to the Subject, Second Edition (e-Book)

Product Number: 37552-E
ISBN: 1877914711
Author: J.T.N. Atkinson and H. Van Droffelaar
Publication Date: 1995
$90.00

This NACE best-seller is based on the authors' course, The Corrosion & Protection of Metals.  This edition of this classic text is based on notes used by the authors for more than a decade in their course, The Corrosion and Protection of Metals. The authors emphasize the engineering aspects of corrosion and its control in ways that will be helpful to the practicing engineer. Topics covered include corrosion economics, detecting and monitoring corrosion, regulations, specifications, safety, and the selection and use of materials, with special emphasis on stainless steels.  1995 NACE E-BOOK 
Picture for Effect of Solution pH on Corrosion Product Layer Formation in a Controlled Water Chemistry System
Available for download

Effect of Solution pH on Corrosion Product Layer Formation in a Controlled Water Chemistry System

Product Number: 51317--9160-SG
ISBN: 9160 2017 CP
Author: Supat IEAMSUPAPONG
Publication Date: 2017
$20.00

The primary objective of this study was to investigate iron carbonate (FeCO3) formation mechanisms on ferritic-pearlitic carbon steel corroding in a CO2 saturated aqueous solution near iron carbonate saturation, with particular emphasis on the effect of solution pH.
Picture for 10374 Key Facctors in Development of a CO2/H2S Corrosion Prediction Model for Multiphase Oil/Gas
Available for download

10374 Key Facctors in Development of a CO2/H2S Corrosion Prediction Model for Multiphase Oil/Gas Production Systems

Product Number: 51300-10374-SG
ISBN: 10374 2010 CP
Author: Kwei-Meng Yap and Sridhar Srinivasan
Publication Date: 2010
$20.00
New Developments in Fluorourthane Coatings for Bridges
Available for download

New Developments in Fluorourthane Coatings for Bridges

Product Number: 41216-995-SG
Author: Robert Parker, Kristen Blankenship
Publication Date: 2016
$20.00

Fluorourethane coatings based on FEVE, fluoroethylene vinyl ether chemistry, have been used globally for over 30 years. This technology has a proven record of outstanding performance against exposure to the elements and has been used in applications ranging from aerospace to architectural structures. Recently, the bridge market has taken notice of this high performance, especially in harsh marine environments. Resistance to degradation by UV light is important to the longevity of a bridge structure, but it could be argued that corrosion resistance is the key performance indicator for a protective topcoat. 
Picture for Case Histories of Low Alloy Steel Used for Completion Tools in High-H2S and -CO2 Environments
Available for download

51318-10899-Case Histories of Low Alloy Steel Used for Completion Tools in High-H2S and -CO2 Environments

Product Number: 51318-10899-SG
Author: Karthik Krishnan
Publication Date: 2018
$20.00

This paper discusses two case histories in which 41XX low-alloy steel, quenched and tempered to 22 HRC maximum hardness, was used in longer-term downhole completion tools.
Picture for Prioritization of External Corrosion on Piping Within Metallic Casing using In-Line Inspection Data
Available for download

Prioritization of External Corrosion on Piping Within Metallic Casings using In-Line Inspection Data

Product Number: SP21475-2020
Publication Date: 2020
$109.00

This NACE International standard provides the most current technology and industry practices for prioritization of cased piping using In-Line Inspection (ILI) data.  

 Metallic casings are used to install and protect the carrier pipe at pipeline crossings such as those at road and railroad rights of way. This standard provides an overview of prioritization strategies for management of external corrosion of piping in metallic cased crossings using ILI data integrated with construction, operating, maintenance and inspection information.
Picture for TM0171-Autoclave Corrosion Testing of Metals in High-Temperature Water-HD1995
Available for download

TM0171-HD1995-SG Autoclave Corrosion Testing of Metals in High-Temperature Water-HD1995

Product Number: 21203-HD1995
Author: NACE International
Publication Date: 1995
$179.00

A laboratory test method for determining the extent and rate of corrosion of metals in high-temperature water at temperatures greater than 100°C (212°F) but less than approximately 360°C (680°F). Historical Document 1995
Picture for Corrosion and Corrosion Products in a Sour Environment from 80°C to 200°C
Available for download

Corrosion and Corrosion Products in a Sour Environment from 80°C to 200°C

Product Number: 51317--9084-SG
ISBN: 9084 2017 CP
Author: Shujun Gao
Publication Date: 2017
$20.00

Corrosion rate of mild steel and character of corrosion products in sour environments at temperatures from 20 to 200°C. H2S-H2O water chemistry model was developed. Then, H2S corrosion tests were done at 80, 120, 160 & 200°C - exposure time of 4 days.
Picture for 08271 Effects of Oxygen, Temperature and Salinity on Carbon Steel Corrosion in Aqueous Solutions; Mo
Available for download

08271 Effects of Oxygen, Temperature and Salinity on Carbon Steel Corrosion in Aqueous Solutions; Model Predictions versus Laboratory Results

Product Number: 51300-08271-SG
ISBN: 08271 2008 CP
Author: Steven Grise and Brian Saldanha
Publication Date: 2008
$20.00

Corrosion of carbon steel materials in brine solutions.  Model results will be compared with literature data and lab experiments. Conditions will be limited to near neutral pH (5-9), temperature  from 22oC to 55oC, and O2 atmospheres up to 101.325 kPa.
Picture for 51318-10847- A Critical Review of Parameters for Meaningful AC Corrosion Modelling
Available for download

51318-10847- A Critical Review of Parameters for Meaningful AC Corrosion Modelling

Product Number: 51318-10847-SG
Author: Ernesto Santana-Diaz / Andreas Junker-Holst / Lars Vendelbo Nielsen
Publication Date: 2018
$20.00

The present paper presents and discusses the various components contained in an electrical equivalent circuit describing the AC corrosion process from a computer modelling perspective.
Picture for Crevice Corrosion Performance of High Grade Stainless Steels and Ni-Based Alloys in Natural And Treated Seawater
Available for download

Crevice Corrosion Performance of High Grade Stainless Steels and Ni-Based Alloys in Natural And Treated Seawater

Product Number: 51316-7196-SG
ISBN: 7196 2016 CP
Author: Dominique Thierry
Publication Date: 2016
$20.00

To better understand and quantify the effect of crevice geometry, several crevice configurations simulating service conditions were evaluated including flanges assembled with gaskets, bolts mounted with nuts to plates, and the standard CREVCORR-type crevice formers.
Picture for 51317-9340-Investigation of Under-deposit corrosion on X-60 using Multielcetrode System
Available for download

51317-9340-Investigation of Under-deposit corrosion on X-60 using Multielcetrode System

Product Number: 51317-9340-SG
Author: Nayef M. Alanazi
Publication Date: 2017
$0.00

The effect of the deposition of sand and field sludge on the corrosion mechanism of carbon steel in sour environments. Under-deposit corrosion (UDC) of carbon steel was studied underneath the sand deposit and the field sludge in a simulated sour environment
Picture for AMPP TR21473-2024, In-Situ Coating of Steel Pipelines via Pigging
Available for download

AMPP TR21473-2024, In-Situ Coating of Steel Pipelines via Pigging

Product Number: AMPP TR21473-2024
Publication Date: 2024
$109.00

This report provides the most current technology and industry practices for the internal in-situ cleaning and coating application in an existing steel pipeline. This report presents general practices and preferences in regard to the cleaning, surface preparation, drying, and the application of a coating in a steel pipeline by the pig (scraper) batching method. It is applicable to onshore or offshore steel pipelines in all industries including the oil and gas gathering, distribution, and transmission industries. It is also applicable to welded steel water and brine handling pipelines.
Picture for 03288 CORROSION INHIBITORS IN CONCRETE
Available for download

03288 CORROSION INHIBITORS IN CONCRETE

Product Number: 51300-03288-SG
ISBN: 03288 2003 CP
Author: R.J. Kessler, R.G. Powers, W.D. Cerlanek, A.A. Sagues
$20.00
Picture for Corrosion Inhibition of Carbon Steel under Supercritical CO2/H2S Environment
Available for download

51318-11193-Corrosion Inhibition of Carbon Steel under Supercritical CO2/H2S Environment

Product Number: 51318-11193-SG
Author: Yoon-Seok Choi / Shokrollah Hassani / Thanh Nam Vu / Srdjan Nesic
Publication Date: 2018
$20.00

Experiments were carried out in a 7.5L autoclave with two combinations of CO2 partial pressure and temperature and different H2S concentrations. Corrosion behavior of specimens was evaluated using electrochemical measurements and surface analytical techniques.
Pitting, crevice corrosion, carbon steel, ZnP pretreatment, coating damage, cyclic polarization, immersion test
Available for download

Localized Corrosion on Coating Damaged Surface of Automotive Suspension Coil Springs

Product Number: 51317--9152-SG
ISBN: 9152 2017 CP
Author: Yugo Ashida
Publication Date: 2017
$20.00

This study focuses on a better understanding of pitting and crevice corrosion on coating surface damaged carbon steels in automotive applications. Immersion and cyclic polarization tests were conducted on bare and coated metals in a 5% NaCl solution.
Picture for Spatial evaluation of the corrosion condition of reinforced concrete structures
Available for download

51318-11133-Spatial evaluation of the corrosion condition of reinforced concrete structures

Product Number: 51318-11133-SG
Author: Sylvia Kessler
Publication Date: 2018
$20.00

This paper presents a case study (an abutment wall built in 1961)for updating the corrosion probability with half-cell potential measurement data.

 
Picture for Concept of Using Physics-Based Models for Real Time Corrosion Monitoring
Available for download

51316-7128-Concept of Using Physics-Based Models for Real Time Corrosion Monitoring

Product Number: 51316-7128-SG
ISBN: 7128 2016 CP
Author: Fengmei Song
Publication Date: 2016
$20.00

 The concept of using physics-based models for corrosion monitoring is still new although corrosion monitoring by use of hardware coupons and probes is well recognized.  This paper describes the application in downstream related to crude unit overhead and demonstrates how the monitoring concept can be used and its benefits.
Picture for 51318-10889- Development and Testing of a Laboratory Based MIC Corrosion Rate Measurement Device
Available for download

51318-10889- Development and Testing of a Laboratory Based MIC Corrosion Rate Measurement Device

Product Number: 51318-10889-SG
Author: Sarah Eisenlord / Mike Mensinger Jr. / Scott Leleika / Ryan Feist
Publication Date: 2018
$20.00

High throughput corrosion measurement indicates that species type and concentration directly impact MIC rates. A corrosion model to identify a risk index for corrosion is based on amount, type, and proportion of living MIC organisms.
Picture for Atmospheric Microbiologically Influenced Corrosion
Available for download

51317--9709-Atmospheric Microbiologically Influenced Corrosion

Product Number: 51317--9709-SG
ISBN: 9709 2017 CP
Author: Xihua He
Publication Date: 2017
$20.00

A combination of carbon and stainless steel probes and coupons was used to evaluate microbiologically influenced corrosion (MIC) in humid air and determine whether dry storage systems (DSSs) could be affected by MIC during extended storage.

 
Picture for Scale And Corrosion Control Mechanisms for Condensate Feedwater and Boilers in Industrial Systems
Available for download

51318-11361-Scale And Corrosion Control Mechanisms for Condensate Feedwater and Boilers in Industrial Systems

Product Number: 51318-11361-SG
Author: John A. Kelly / Chad D. Frierson / Andrew C. Doak
Publication Date: 2018
$20.00

Pertinent mechanisms of scale and deposition control processes as well as the sources of contaminants are discussed. Methods of prevention and control parameters are demonstrated with laboratory and field results.
Picture for Corrosion Management Improvements in Liquids-Rich Shale Play - Pipeline Internal Corrosion Mitigation Case Studies
Available for download

Corrosion Management Improvements in Liquids-Rich Shale Play - Pipeline Internal Corrosion Mitigation Case Studies

Product Number: 51324-20990-SG
Author: Monica Fernandez; Chris Jeske; Robert Terry; Ruben Carrera
Publication Date: 2024
$40.00
This paper details the process followed to enhance the pipeline internal corrosion management during operational stage in a liquids-rich shale play, focusing on pipeline internal corrosion mitigation. The process involves several key steps, encompassing a thorough review of historical data (operational conditions, fluid chemistry, corrosion coupons, chemical treatments, pigging activities, inspection results, among others), meticulous data analysis, strategic scheduling, implementation of short-term, mid-term, and long-term actions, followed by periodic monitoring to evaluate barrier performance in conjunction with an inspection plan to confirm asset integrity and optimize resource utilization. The improvements have considered industry best practices, know-how, lessons learned, valuable insights gained from past failures, challenges encountered within upstream operations for corrosion and integrity activities execution, and the actions taken to overcome them.
Picture for Electrochemical Characterization of CoCr Alloy in In-vivo Synovial Fluids
Available for download

51315-6142-Electrochemical Characterization of CoCr Alloy in In-vivo Synovial Fluids

Product Number: 51315-6142-SG
ISBN: 6142 2015 CP
Author: Stefano Mischler
Publication Date: 2015
$20.00
Predicting Atmospheric Galvanic Corrosion of Aluminum using Accelerated Laboratory Electrochemical Experiments
Available for download

Predicting Atmospheric Galvanic Corrosion Of Aluminum Alloy By Combining Electrochemical Techniques And Accelerated Laboratory Corrosion Tests

Product Number: 51322-18163-SG
Author: Raghu Srinivasan, Toomas Kollo, Matt Cullin
Publication Date: 2022
$20.00

Aluminum (Al) alloys are the most common non-ferrous metals used (approximately 25 million tons per year) and the second most commonly used metal alloy after steel1. Some of the properties of Al alloys that attribute to their worldwide use include lightness, thermal conductivity, electrical conductivity, suitability for surface treatments, and corrosion resistance. Al alloys are also combined with other metals/materials to achieve desired properties for specific applications. Al alloys can be joined to other materials with ease to enhance their combined properties with the following techniques: welding, bolting, riveting, clinching, adhesive bonding, and brazing1. 
Picture for Tracer Studies in Boiler Scale and Corrosion Control
Available for download

Tracer Studies in Boiler Scale and Corrosion Control

Product Number: 51323-19005-SG
Author: Haiping Lu, Swamy Margan, Dean Diagostine
Publication Date: 2023
$20.00


Boilers are one of the most fundamental systems in refineries or processing plants. It is very critical to assess and control the conditions of boilers to avoid the operation failure. Scale and corrosions are major problems in the boiler. Boiler chemical treatment has been considered to be a cost-effective approach to prevent deposition formation and minimize corrosion in boilers to control feeding chemicals, tracers are used for monitoring chemical dosage levels. The usage of fluorescent tracers for dosage control and system diagnostics is a recognized approach for decreasing operator workload and improving system performance.

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support