AMPP Store - Search

Available for download

Sour or Not Sour? That Is the Question: A Review of The NACE “Sour Limit” – Evolution and Implications for Modern Oil & Gas Production

Product Number: 51321-16626-SG

Author: Eric Caldwell/ Russell Kane/ Brian Chambers

Publication Date: 2021

$20.00

Available for download

NACE TM0374-HD2001-SG, Laboratory Screening Tests to Determine the Ability of Scale Inhibitors to Prevent the Precipitation of Calcium Sulfate and Calcium Carbonate from Solution (for Oil and Gas Production Systems)

Product Number: 21208-HD2001-SG

ISBN: 1-57590-124-2

$179.00

Test methods designed to provide a relative and quantitative measure of the abilities of scale inhibitors to prevent the precipitation of solids, a necessary and critical stage in the formation of scale.

Available for download

NACE TM0197-2019, Laboratory Screening Test to Determine the Ability of Scale Inhibitors to Prevent the Precipitation of Barium Sulfate or Strontium Sulfate, or Both, from Solution (for Oil and Gas Production Systems)

Product Number: 21228-2019

Publication Date: 2019

$179.00

HISTORICAL DOCUMENT. This standard describes a test method to screen scale inhibitors for their ability to prevent precipitation of BaSO4 or SrSO₄, or both, from oilfield brines. This standard test method is intended to provide the user with a relative and quantitative measure of the ability of scale inhibitors to prevent (1) the formation and (2) the precipitation of solid BaSO₄ or SrSO₄, or both, which are necessary and critical stages in scale deposition

Available for download

02426 THE INFLUENCE OF SOIL CHEMISTRY ON SCC OF PIPELINES AND THE APPLICABILITY OF THE 100 mV POLARIZATION CRITERION

Product Number: 51300-02426-SG

ISBN: 02426 2002 CP

Author: J. A. Beavers, C. L. Durr, and K. C. Garrity

Publication Date: 2002

$20.00

The objective of the research summarized in this paper was to define pipeline conditions where use of the 100-mV polarization criterion may be conducive to possible SCC problems. Paper Number 01592, presented at Corrosion/2001, summarized Part 1 of the research, in which the previous research results were analyzed. In this paper, the results of the laboratory testing are presented.

Available for download

Evaluation Of Titanium 475 Alloy For Use In Oil And Gas Environments

Product Number: 51322-17840-SG

Author: William. D. MacDonald, Mikel Hogan, Dennis Dunlap

Publication Date: 2022

$20.00

ASTM Grade 29 titanium alloy (UNS R56404) has been traditionally used for oil and gas stress joints (TSJ). However, given the general difficulty of processing this type of alloy in the beta quenched condition and more recently the exorbitant increase in alloying costs due to the ruthenium, a new solution is required if titanium is to be considered for future applications. This 475 alloy was developed to meet geothermal requirements to replace Grade 29 seamless casing. The essential material properties of Grade 29 in bulk and welded condition as used for titanium stress joints were reported by Shutz et al.

Available for download

NACE Publication 01102-2018, State-of-the-Art Report: Criteria for Cathodic Protection of Prestressed Concrete Structures

Product Number: 24217-SG

Publication Date: 2018

$109.00

Evaluating criteria whereby prestressed concrete structures and members can be protected from corrosion by means of cathodic protection (CP).

Available for download

ANSI/NACE SP0115-2015/ISO15589-2:2012, “Petroleum, petrochemical and natural gas industries — Cathodic protection of pipeline transportation systems — Part 2: Offshore pipelines”

Product Number: 21190-SG

ISBN: 1-57590-310-5

Publication Date: 2015

$220.00

This standard specifies requirements and gives recommendations for the pre-installation surveys, design, materials, equipment, fabrication, installation, commissioning, operation, inspection and maintenance of cathodic protection (CP) systems for offshore pipelines for the petroleum, petrochemical and natural gas industries as defined in ISO 13623. It is applicable to carbon steel, stainless steel and flexible pipelines in offshore service, and to retrofits, modifications and repairs made to existing pipeline systems. Key words: Cathodic protection, impressed current, offshore pipeline, CP system design, galvanic anode, galvanic anode manufacturing, galvanic anode quality control, pipeline design for CP This nationally adopted ISO standard is not available for complimentary download by members.

Available for download

Comments On Standards Development For Selection And Specification Of Subsea Materials

Product Number: 51322-17491-SG

Author: Russell D. Kane

Publication Date: 2022

$20.00

In the oil and gas industry, the major standard for material selection today is ANSI¹/NACE² MR0175/ISO 15156 Parts 1-3. [1] While this standard deals extensively with environment cracking and its prevention for materials under exposure to production environments containing H₂S, CO2, chlorides, and sulfur, it does not include any guidance or material requirements for resistance to environmental cracking (such as hydrogen stress cracking – HSC, or otherwise) under variable subsea conditions that involve exposure to seawater with varying levels of cathodic protection (CP). ISO 21457 [2] provides further guidance for materials selection and corrosion control for oil and gas production systems but does not provide adequate coverage of the issue of environmental cracking in subsea applications with CP.

Available for download

51315-5568-Effects of Initial Notch Length on KIAPPLIED KISSC and KLIMIT in NACE TM0177 DCB Test

Product Number: 51315-5568-SG

ISBN: 5568 2015 CP

Author: Xin Long

Publication Date: 2015

$20.00

Available for download

NACE Publication 1D182-2017-SG, Wheel Test Method Used for Evaluation of Film-Persistent Corrosion Inhibitors for Oilfield Applications (2017 Edition)

Product Number: 24007-SG

ISBN: 1-57590-390-3

Publication Date: 2017

$109.00

Test method used to evaluate film-persistent corrosion inhibitors for oilfield applications. Not uniformly accepted through the oil industry, but is outlined here to explain one common type of wheel test.

Available for download

Case Study: HDD CP Retrofit For Existing Critical Service Ethylene Above Ground Storage Tank.

Product Number: 51322-18035-SG

Author: Shailesh Javia, Venkat Sreenivas

Publication Date: 2022

$20.00

Corrosion has long been recognized as an extremely costly naturally occurring phenomenon that can be controlled through the proper application of corrosion prevention and control methods protecting public safety, extending the service life of assets and preventing damage to property and the environment. The landmark Cost of Corrosion Study published by the U.S. Federal Highway Administration estimated that corrosion costs were approximately 3.1% of the nation’s GDP. Within the study, several key sectors of the US economy were studied. This paper is focused on one of those areas – the corrosion risks associated with storage tanks that contain hazardous materials. The study determined that the annual direct cost of corrosion for above ground hazardous material storage tanks (ASTs) in the US was ~$4.5 billion.

Available for download

03103 Factors Affecting Crack Path, Edge Cracking, and KIssc Rating during Testing of Low-Alloy Steels by the NACE Double-Cantilever-Beam Method of TM0177-96(D)

Product Number: 51300-03103-SG

ISBN: 03103 2003 CP

Author: D.L. Sponseller, C.J. Padfield, B.E. Urband

$20.00

Search and Filter

Sour or Not Sour? That Is the Question: A Review of The NACE “Sour Limit” – Evolution and Implications for Modern Oil & Gas Production

NACE TM0374-HD2001-SG, Laboratory Screening Tests to Determine the Ability of Scale Inhibitors to Prevent the Precipitation of Calcium Sulfate and Calcium Carbonate from Solution (for Oil and Gas Production Systems)

NACE TM0197-2019, Laboratory Screening Test to Determine the Ability of Scale Inhibitors to Prevent the Precipitation of Barium Sulfate or Strontium Sulfate, or Both, from Solution (for Oil and Gas Production Systems)

02426 THE INFLUENCE OF SOIL CHEMISTRY ON SCC OF PIPELINES AND THE APPLICABILITY OF THE 100 mV POLARIZATION CRITERION

Evaluation Of Titanium 475 Alloy For Use In Oil And Gas Environments

NACE Publication 01102-2018, State-of-the-Art Report: Criteria for Cathodic Protection of Prestressed Concrete Structures

ANSI/NACE SP0115-2015/ISO15589-2:2012, “Petroleum, petrochemical and natural gas industries — Cathodic protection of pipeline transportation systems — Part 2: Offshore pipelines”

Comments On Standards Development For Selection And Specification Of Subsea Materials

51315-5568-Effects of Initial Notch Length on KIAPPLIED KISSC and KLIMIT in NACE TM0177 DCB Test

NACE Publication 1D182-2017-SG, Wheel Test Method Used for Evaluation of Film-Persistent Corrosion Inhibitors for Oilfield Applications (2017 Edition)

Case Study: HDD CP Retrofit For Existing Critical Service Ethylene Above Ground Storage Tank.

03103 Factors Affecting Crack Path, Edge Cracking, and KIssc Rating during Testing of Low-Alloy Steels by the NACE Double-Cantilever-Beam Method of TM0177-96(D)

Association for Materials Protection and Performance