Menu
Search
Filters
Close
Menu

Search and Filter

Toggle Open/Closed
View as
Display per page
14122 total products found.
Picture for In situ Electrochemical Evaluation of Pitting Corrosion of Carbon Steel Pipelines Exposed to Slightl
Available for download

In situ Electrochemical Evaluation of Pitting Corrosion of Carbon Steel Pipelines Exposed to Slightly Sour Seawater Service

Product Number: 51317--9416-SG
ISBN: 9416 2017 CP
Author: Ray Case
Publication Date: 2017
$20.00

The study of pitting susceptibility of carbon steel exposed to slightly sour service environment is conducted by using direct current and electrochemical impedance (IES). The test matrix is designed considering the oxidizing potential of the seawater as the independent variable.

 
Translational Corrosion Science
Available for download

Translational Corrosion Science

Product Number: 41216-959-SG
Author: D. Dunmire, G. Keller
Publication Date: 2016
$20.00

Translational Corrosion Science, the subject of the SSPC 2015 presentation by the Department of Defense Corrosion (DoD) Prevention and Control Program, is a science-based process to accelerate the development and application of high-quality solutions to difficult material degradation problems, and to do so more economically. DoD has launched the translational corrosion science program, assisted by the National Defense University and Potomac Institute for Policy Studies, to fully develop the process concept and to implement the approach. 
Picture for A Combined Numerical and Experimental Approach to Study the Effect of Water Layer Thickness on the E
Available for download

A Combined Numerical and Experimental Approach to Study the Effect of Water Layer Thickness on the Electrochemical and Corrosion Distributions in the Galvanic Coupling Between UNS A97050 and UNS S31600

Product Number: 51317--9157-SG
ISBN: 9157 2017 CP
Author: Chao Liu
Publication Date: 2017
$20.00

In this study, a combined experimental and modeling approach was used to characterize the effect of electrolyte layer thickness on electrochemical and localized corrosion distributions in the crevice between SS fastener and Al alloy component.
Picture for Two-Way Application of Corrosion Inhibitor in Gas and Condensate Field
Available for download

Two-Way Application of Corrosion Inhibitor in Gas and Condensate Field

Product Number: 51320-14398-SG
Author: Susumu Hirano, Takashi Ito, Toshiyuki Sunaba, Kazuyo Sasaya, Atsushi Kobayashi, Hironari Iijima
Publication Date: 2020
$20.00

A fit for purpose qualification of new corrosion inhibitors was carried out for in a gas and condensate field. The depth of production well is 4,500 m and the bottom hole temperature and pressure are 180ºC and 50 MPa respectively. The methodology and result of the inhibitor evaluation under a sweet condition was summarized. Two brands of corrosion inhibitors had been used each for production tubing and flowline in the field. New corrosion inhibitors were evaluated for the both applications. The corrosion inhibitor efficiency for high shear service and the adhesion tendency were evaluated with a rotating cage autoclave and a dip and drip experiment respectively. In order to evaluate the tendency of emulsion forming, oil, brine and an inhibitor were poured into a centrifuge tube and it was shaken intensely. Gas chromatograph - mass spectrometer (GC-MS) and Fourier transform infrared spectroscopy (FT-IR) were studied to measure the residual amount of inhibitor. Finally, the field trial was conducted with a new inhibitor. The new inhibitor was adopted successfully for the both services. The risk of emulsion forming became lower because the mixing of two brands of inhibitors was avoided. Reducing the number of the chemicals contributed to reduction of the operation cost too.
Picture for Implementation of Strong Acid and CO2 Corrosion in CFD Software
Available for download

Implementation of Strong Acid and CO2 Corrosion in CFD Software

Product Number: 51324-21225-SG
Author: Adam Cutright; Payman Sharifi; Srdjan Nesic; Bruce Brown; Muhammad Sami
Publication Date: 2024
$40.00
To properly understand the necessary steps in implementing corrosion modeling into existing CFD software, it is necessary to verify the accuracy of the corrosion predictions made by the software. To do this, simulations are created that replicate experimental work performed in well understood geometries. The corrosion models are implemented in these simulations, and the resulting corrosion rates, as well as hydrodynamic and mass transfer characterizations, are compared to results from the experimental work. Presented herein is work investigating corrosion phenomena in a thin channel flow cell apparatus, as well as single phase straight pipe flow. In both geometries hydrodynamics, mass transfer, and electrochemistry have been simulated at a variety of conditions; the accuracy of the results were confirmed through comparison with experimental data and well tested correlations. Both geometries showed a high degree of agreement between the simulations and the experimental work, indicating that the methodology is viable to be used in other geometries.
Residual Analysis Assay For Thiol-Based VCI Quantification In Top-Of-Line Corrosion Environments
Available for download

Residual Analysis Assay For Thiol-Based VCI Quantification In Top-Of-Line Corrosion Environments

Product Number: 51322-17918-SG
Author: Mariana Costa Folena, José Antônio da Cunha Ponciano Gomes, Hanan Alshareef Farhat, Iain Manfield, Joshua Owen, Anne Neville, Richard Barker
Publication Date: 2022
$20.00

Top of line corrosion (TLC) is a degradation mechanism predominantly encountered in the oil and gas industry. Initiation of TLC requires a stratified flow regime with wet gas transportation and the existence of a significant temperature gradient between the hot fluid inside the pipeline and the colder external environment.1,2,3 This temperature difference results in the condensation of water vapor, present in the gas phase, onto the cooler, upper internal section of the pipeline. The condensed water can be particularly aggressive as it lacks dissolved salts (e.g. bicarbonates), some of which are able to buffer the bulk electrolyte, increasing the pH and suppressing corrosivity.4,5,6 The absence of such salts typically results in a very low pH condensate (<pH 4), often containing dissolved acidic gases, such as carbon dioxide (CO2) and hydrogen sulfide (H2S), and also acetic acid (HAc), which can cause severe degradation, particularly in the form of localized corrosion.5 
Picture for Stress Corrosion Cracking of Stainless Steel in Heavy Black Liquor - Mill Experience.
Available for download

51318-10701-Stress Corrosion Cracking of Stainless Steel in Heavy Black Liquor - Mill Experience.

Product Number: 51318-10701-SG
Author: Stephen Clarke
Publication Date: 2018
$20.00

This paper describes the cracking failure of a UNS S30403 (304L) stainless steel 72% heavy black liquor storage tank at a Canadian bleached kraft pulp mill.
Development of Technique for In-Situ Measurement of Oxide Film Thickness in High Pressure and High Temperature Environments
Available for download

Development Of Technique For In-Situ Measurement Of Oxide Film Thickness In High Pressure And High Temperature Environments

Product Number: 51322-18211-SG
Author: Florent Bocher, Jeffrey Boehme
Publication Date: 2022
$20.00

High pressure and high temperature processes are present in a wide variety of industries and are often pushing the limits of common materials. As a result, these applications have required advanced materials as well as an improved understanding of the in-situ conditions. Furthermore, those processes have become more and more present in a wide range of industries such as upstream oil and gas (O&G) and power generation (in supercritical CO2 or molten salt nuclear reactors). The corrosion performance of existing and emerging materials to the extreme environments present in next generation power must be well characterized to ensure material integrity and reduce the risk of catastrophic failures due to environmentally assisted cracking, homogeneous corrosion, thermal oxidation, or other mechanisms. 
Picture for Laboratory Evaluation Of Corrosion Inhibitor And The Performance Requirements In Gas Gathering And Transportation Pipelines
Available for download

Laboratory Evaluation Of Corrosion Inhibitor And The Performance Requirements In Gas Gathering And Transportation Pipelines

Product Number: 51322-17856-SG
Author: Chen Wen, Tian Yuan, Yu Hua-li, Chang Hong_gang
Publication Date: 2022
$20.00

At present, with the increasing in demand for natural gas, all gas production companies are increasing their efforts in natural gas exploration and development. Corrosion is one of the problems during the wet gas transporting, and this can be solved by adding corrosion inhibitor(CI) in most case. However, there are no standards for the Cis performance used in gas gathering and transportation pipelines, which may lead to some gapsbetweentheR&Dscientistsandtheneedsofcorrosioninhibitorusers. Based on the demand of some gas production companies for the CIs, this paper puts forward the performance requirements and corresponding indexes of Cis for natural gas gathering and transportation system, and given some advice on the evaluation method.
Picture for Characterizing Properties and Stress Corrosion Cracking Resistance of Alloy 718 via Additive Manufacturing
Available for download

Characterizing Properties and Stress Corrosion Cracking Resistance of Alloy 718 via Additive Manufacturing

Product Number: 51323-19117-SG
Author: Karthik Krishnan
Publication Date: 2023
$20.00

UNS N07718 (Alloy 718) is a precipitation-hardened Nickel alloy widely used for various components in oil and gas production service where a combination of high strength, good cracking and corrosion resistance is needed. API 6ACRA provides heat treatment windows and acceptance criteria for wrought Alloy 718 in these oil and gas production environments, in which the heat treatment is intended to obtain high strength desired for applications in combination with good environmental performance.


Additive Manufacturing (AM) is increasingly becoming a source of design, fabrication of complex components where machining from wrought material would be very cumbersome or introduced complicated welding processes.
Picture for Saudi Aramco Corrosion Management Solution (CMS) – A Proactive Transformation in Corrosion Management
Available for download

Saudi Aramco Corrosion Management Solution (CMS) – A Proactive Transformation in Corrosion Management

Product Number: MECC23-20308-SG
Author: Abdullah M. Alratoee; Faisal M. Al-Mutahhar; Ibrahim A. Albrahim; Rakan A. Al-Shebil; Ayman A. Alabdullatif; Ricardo S. Costa; Yousef A. Aldossary; Muntathir M. Al-Jumaah
Publication Date: 2023
$20.00

Maximizing asset uptime and reducing maintenance costs are essential in any process facility. Effective corrosion management is a key driver to achieving these goals. Corrosion management involves monitoring and controlling corrosion to maintain the integrity of equipment and improve availability and safety.
Picture for Corrosion Inhibitor Screening - Impact of Test Approaches &amp; Conditions on Performance
Available for download

51318-11654-Corrosion Inhibitor Screening - Impact of Test Approaches &amp; Conditions on Performance

Product Number: 51318-11654-SG
Author: Ian Carpenter / Hunter Thomson / Rodney Madjitey / Caroline M.E. Simpson
Publication Date: 2018
$20.00

This paper provides illustrative examples of how seemingly small changes to test methodology in preliminary screening tests can significantly influence the absolute performance and relative ranking of corrosion inhibitors.

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support