AMPP Store - Search

Available for download

ANSI/NACE MR0175-2021/ISO 15156-3:2020 Technical Circular 2 (for Part 3)

Product Number: 15156-3-2022

Publication Date: 2022

$25.00

Petroleum and natural gas industries — Materials for use in H₂S-containing environments in oil and gas production —

Part 3:
Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys

TECHNICAL CIRCULAR 2

Ref. No. ISO 15156-3:2020/Cir.2:2022(E)

Available for download

Development Of The NACE “MR-01-75” And NACE “TM-01-77” Standards: Part II – Accelerated Material Qualification Testing In Sour Environments At Near Atmospheric Pressure

Product Number: 51322-17516-SG

Author: Brent W.A. Sherar, Eric Caldwell, Peter F. Ellis II, Russell D. Kane

Publication Date: 2022

$20.00

This paper is Part II of a two-part series intended to narrate the history, some of which has been forgotten over time, leading up to the publication of the first Material Requirement (MR-01-75) standard prepared by NACE and its subsequent auxiliary standards. Previously, Part I¹ described the field observations and discussed the metallurgical factors that were being investigated by the historical NACE T-1B and 1F committees to support the development a “harmonized” sour service materials standard. In Part II, we focus on the rationale behind the use of accelerated laboratory test procedures and their development to differentiate metallurgical behavior in sour environments.

Available for download

Development Of The NACE “MR-01-75” And NACE “TM-01-77” Standards: Part I – Field Observations And Metallurgical Factors

Product Number: 51322-17525-SG

Author: Eric C. Caldwell, Brent W.A Sherar, Peter F. Ellis II, Russell D. Kane

Publication Date: 2022

$20.00

This is Part I of a two-part series intended to provide background and a rational justification or supporting rationale for requirements leading to the development and publication of NACE⁽¹⁾ MR 0175 and ISO⁽²⁾ 15156. Part I focuses on some of the metallurgical and processing requirements; specifically, Rockwell C 22 scale (HRC) limit, the various acceptable heat treatments and the 1wt% Ni limit for carbon and low alloy steels to minimize the threat of sulfide stress cracking (SSC) in H₂S containing environments. Part II describes the testing and rationale behind the use of accelerated laboratory test procedures and their development to differentiate metallurgical behavior in sour environments.

Available for download

SSPC-TR 2/NACE TR6G198-2023, Wet Abrasive Blast Cleaning

Product Number: SSPC-TR 2/NACE TR6G198-2023

Publication Date: 2023

$109.00

This technical report discusses equipment, procedures, materials, and the resulting substrate conditions involved in a variety of WAB cleaning methods currently available for commercial use. It also discusses the effect that the water present with these wet cleaning methods has on achieving the defined degree of cleaning of steel surfaces in accordance with the wet abrasive blast cleaning standards found in the list of Referenced Standards and Other Consensus Documents. It is intended for use primarily by specifiers, owners, painting contractors, inspectors, and others involved in surface preparation of industrial structures.

This report was originally issued in 1998 and has been revised to include additional configurations of equipment setup as well as current (2022) developments in the design of wet abrasive blast cleaning systems and nozzles. This TR provides a foundation to assist users to determine the quantity and quality of water, abrasive, and air.

Available for download

Investigating Specimen Preparation and Cleaning Variables Influencing the NACE TM0208-2018 Jar Test Performance

Product Number: 51322-17985-SG

Author: Mitchell Fillbach, Mikel Roe, Daniel Neuburger, Barbara Nygaard, Mahin Shahlari

Publication Date: 2022

$20.00

The NACE TM0208-2018 Jar Test remains an industry-wide recognized standard for evaluating the vapor-inhibiting ability (VIA) of raw materials and finished products to provide off-contact corrosion protection of steel surfaces¹. It is particularly useful for comparing the efficacy of different VCI chemistries, as well as for monitoring performance consistency between productions of VCI functionalized materials.

Available for download

NACE No. 11/SSPC-PA 8-2003, Thin-Film Organic Linings Applied in New Carbon Steel Process Vessels

Product Number: 21099-SG

ISBN: NACE No. 11

$109.00

Procedures to design, install, and inspect thin-film organic linings in carbon steel process vessels to prevent corrosion, other degradation or product contamination.

Available for download

MD-06 NACE Institute and Certification Exams

Product Number: MD-06 NACE Institute

$0.00

Available for download

NACE Publication 6G194/SSPC-SP-TR 1-1994, Thermal Precleaning

Product Number: 24183-SG

ISBN: 6G194 NACE/SSPC

$109.00

Thermal precleaning for tanks, vessels, rail tank cars and hopper cars, and equipment, preparing surfaces for the application of high-performance or high-bake coating and lining systems.

Available for download

NACE Publication 11106-2006-SG, Monitoring and Adjustment of Cooling Water Treatment Operating Parameters

Product Number: 24229-SG

ISBN: NACE Pub 11106

$109.00

Operation of a cooling tower. Chemical, physical, and microbiological monitoring. For technical staff and operation, engineering, maintenance & sales personnel.

Available for download

NACE Publication 11206-2006-SG, Biocide Monitoring and Control in Cooling Towers

Product Number: 24230-SG

ISBN: NACE Pub 11206

$109.00

Technologies used to control classes of microorganisms found in cooling systems and methods for monitoring and control. Of interest to owners, engineers, contractors, and operators.

Available for download

2022 Conference Proceedings

Product Number: FLASHDRIVE22-CONF_MAR22

Publication Date: 2022

$149.00

Available for download

SSPC-SP 13/NACE No. 6-2024, Surface Preparation of Concrete

Product Number: SSPC-SP 13/NACE No. 6-2024

$109.00

This AMPP standard covers the preparation of concrete surfaces before the application of protective coating or lining systems. This standard should be used by specifiers, applicators, inspectors, and others who are responsible for defining a standard degree of cleanliness, strength, profile, and dryness of prepared concrete surfaces.

Search and Filter

ANSI/NACE MR0175-2021/ISO 15156-3:2020 Technical Circular 2 (for Part 3)

Development Of The NACE “MR-01-75” And NACE “TM-01-77” Standards: Part II – Accelerated Material Qualification Testing In Sour Environments At Near Atmospheric Pressure

Development Of The NACE “MR-01-75” And NACE “TM-01-77” Standards: Part I – Field Observations And Metallurgical Factors

SSPC-TR 2/NACE TR6G198-2023, Wet Abrasive Blast Cleaning

Investigating Specimen Preparation and Cleaning Variables Influencing the NACE TM0208-2018 Jar Test Performance

NACE No. 11/SSPC-PA 8-2003, Thin-Film Organic Linings Applied in New Carbon Steel Process Vessels

MD-06 NACE Institute and Certification Exams

NACE Publication 6G194/SSPC-SP-TR 1-1994, Thermal Precleaning

NACE Publication 11106-2006-SG, Monitoring and Adjustment of Cooling Water Treatment Operating Parameters

NACE Publication 11206-2006-SG, Biocide Monitoring and Control in Cooling Towers

2022 Conference Proceedings

SSPC-SP 13/NACE No. 6-2024, Surface Preparation of Concrete

Association for Materials Protection and Performance