Menu
Search
Filters
Close
Menu

Search and Filter

Toggle Open/Closed
View as
Display per page
3442 total products found.
Picture for 03329 PH STABILISATION FOR INTERNAL CORROSION
Available for download

03329 Anne Marie K. Halvorsen, Tore R. Andersen

Product Number: 51300-03329-SG
ISBN: 03329 2003 CP
Author: Anne Marie K. Halvorsen, Tore R. Andersen
$20.00
Picture for 99314 DEALLOYING OF CUPRONICKELS IN STAGNANT
Available for download

99314 DEALLOYING OF CUPRONICKELS IN STAGNANT SEAWATER

Product Number: 51300-99314-SG
ISBN: 99314 1999 CP
Author: D.R. Lenard, J.R. Martin and R.H. Heidersbach
$20.00
Picture for AMPP Guide 21569-2024, Guidance on Implementing Corrosion Control Methodologies to Align with New PHMSA Regulatory Procedures
Available for download

AMPP Guide 21569-2024, Guidance on Implementing Corrosion Control Methodologies to Align with New PHMSA Regulatory Procedures

Product Number: AMPP Guide 21569-2024
Publication Date: 2024
$109.00

In August 2022, the United States Department of Transportation Pipeline and Hazardous Materials Safety Administration (PHMSA) revised the Federal Pipeline Safety Regulations to improve the safety of onshore gas transmission lines. PHMSA expects the new requirements will reduce the frequency and consequences of failures and incidents involving onshore natural gas transmission pipelines through earlier detection of threats to pipeline integrity, including those resulting from corrosion or extreme weather events. Additionally, revisions to the regulations address several other areas, including management of change processes, corrosion control, and criteria to repair pipelines. New corrosion control regulations were incorporated into the following sections of the United States Code of Federal Regulations (CFR) Title 49, Part 192, Transportation of Natural and Other Gas by Pipeline: Minimum Federal Safety Standards: 192.319, 192.461, 192.465, 192.473, and 192.478. Additionally, revisions to Sections 192.485 and 192.714 include remedial measures for transmission lines impacted by corrosion.

 

PHMSA’s Regulation Identifier Number (RIN) 2137-AF39 entitled “Pipeline Safety: Safety of Gas Transmission Pipelines: Repair Criteria, Integrity Management Improvements, Cathodic Protection, Management of Change, and Other Related Amendments” (also known as RIN 2 or the Gas Mega Rule) increases pipeline safety regulatory requirements in 49 CFR 192 for operations, maintenance and integrity management.
Picture for 08454 Stress Relaxation Cracking Of Welded Joints In Thick Sections Of Type-347 Stabilized Grade Of
Available for download

08454 Stress Relaxation Cracking Of Welded Joints In Thick Sections Of Type-347 Stabilized Grade Of Stainless Steel

Product Number: 51300-08454-SG
ISBN: 08454 2008 CP
Author: Christian E. van der Westhuizen
Publication Date: 2008
$20.00

This paper discusses reactors in hydrocarbon service that experienced numerous cracking problems over a 8-year period, where cracks were confined to the welded zones.  The material is  TP347 stainless steel, welded with E347-16 consumables.
Close Encounters of the Third ‘Crude-Oil’ Kind
Available for download

Close Encounters of the Third ‘Crude-Oil’ Kind

Product Number: 41215-918-SG
Author: Brian O’Farrell
Publication Date: 2015
$20.00

This paper compares and contrasts the accelerated laboratory autoclave (NACE TM0185) performance at 300°F (149°C), and 250 psig, of eight polycyclamine cured epoxy linings. The latter were tested for tank, vessel and pipe spool applications in the oil and gas industry. Five of the linings were commercially available and three were experimental. A modified amine cured epoxy was also evaluated in the study, a lining used to transport shale oil in railcars at temperatures up to 200°F (93°C). 
Standards and Best Practice for Surface Preparation and Coating Application of Concrete

Standards and Best Practice for Surface Preparation and Coating Application of Concrete

Product Number: PB-C0M01-POD
ISBN: 978-1-57590-423-8
$190.00

Concrete surface preparation differs from surface preparation of steel, mostly due to the inherent properties of concrete.

Concrete is a non-uniform mixture of porous, permeable materials (cement, sand, stone, additives, water) with low tensile strength and often numerous cracks and defects. It will vary in properties, including moisture content, from site to site and within any site due to the batched nature of its production and installation.

Ranging from the basics of corrosion in reinforced concrete to using forensic science to determine concrete coatings failure, in this Standards and Best Practice for Surface Preparation and Coating Application of Concrete reference book, students and  technicians learn problem solving via multiple case studies and technical artiles.

2022 AMPP, black and white, soft cover, 358 pages.
Power Tool Cleaned Surfaces New Insights into Surface Profile Measurement
Available for download

Power Tool Cleaned Surfaces New Insights into Surface Profile Measurement

Product Number: 51218-166-SG
Author: Dr. Rebekah Wilson & Brooke Divan
Publication Date: 2018
$20.00

This paper will evaluate methods used to measure surface profiles created by power tools, namely air needle scalers, bristle cleaners, and roto peen scalers. Particular focus will be placed on the use of replica tape and its ability to characterize profiles of various surfaces using a digital replica tape reader with 3D imaging capability. More specifically, this paper will determine if the measurement methods described in ASTM D44171are appropriate for the measurement of profiles produced by power tools.
Picture for Influence of grout conditions on duct-to-strand galvanic coupling within bonded internal posttensioned tendons
Available for download

Influence of grout conditions on duct-to-strand galvanic coupling within bonded internal posttensioned tendons

Product Number: 51323-19371-SG
Author: David Dukeman, Dr. Christopher Alexander
Publication Date: 2023
$20.00

External post-tensioned tendons are used in segmental precast box girder bridge construction to hold segments together and prevent service cracking. The tendons consist of multiple 7-wire prestressing strands contained within a high-density Polyethylene (HDPE) duct located within the inner opening of the box girders. They run continuously through deviator blocks, which helps form the profile of the tendon.
Picture for AMPP TR21478-2023, 3D Optical Imaging Techniques
Available for download

AMPP TR21478-2023, 3D Optical Imaging Techniques

Product Number: AMPP TR21478-2023
Publication Date: 2023
$109.00

3D corrosion measurement techniques described in this report can be performed in the field, laboratory, plant environment, or other related facilities.  Corrosion measurements are obtained under widely varying field conditions and plant environments. This report provides the user with the background needed to make testing decisions in the field or laboratory based on the technical facts available at the time of publication.

This technical report provides descriptions of the corrosion pitting measurement techniques used on underground and aboveground piping, tanks, and vessels using 3D optical imaging tools. This report includes those corrosion measurement techniques that relate to the ASME B31.8, API 579, or special conditions in NACE SP0502
Picture for Compostable VCI Film Brings Corrosion Protection "Back to Nature"
Available for download

Compostable VCI Film Brings Corrosion Protection "Back to Nature"

Product Number: 51324-20431-SG
Author: Djurin Antonia; Ming Shen; Dijana Zrinski; Julie Holmquist
Publication Date: 2024
$40.00
Presented here is a certified industrial compostable vapor phase corrosion inhibitor film that meets EN 13432/ASTM D6400 standards for commercial compostability. It passes NACE VIA (Vapor Inhibiting Ability) requirements and provides the same corrosion protection as conventional inhibitor film. But unlike conventional film going to a landfill or, worse, becoming ocean debris, this compostable film will biodegrade in an industrial compost site and go back to soil components without posing an ecotoxicity threat to plant growth. The paper will discuss the material's construction, mechanical properties, and corrosion performance. This film has been adopted successfully by a major European auto maker for shipping parts around the world.
Picture for 00709 MIL-L-87177 AND A COMMERCIAL LUBRICANT
Available for download

00709 MIL-L-87177 AND A COMMERCIAL LUBRICANT IMPROVE ELECTRICAL CONNECTOR FRETTING CORROSION BEHAVIOR

Product Number: 51300-00709-SG
ISBN: 00709 2000 CP
Author: Dr. James T. Hanlon, Dr. Neff R. Aukland
$20.00
Picture for Galvanic Current Density Measurements Of Anodes For Subsea Vibration Data Logger (SVDL) System
Available for download

Galvanic Current Density Measurements Of Anodes For Subsea Vibration Data Logger (SVDL) System

Product Number: 51321-16717-SG
Author: Suresh Divi; Melissa Gould; and Dan Efird
Publication Date: 2021
$20.00

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support