Menu
Search
Filters
Close
Menu

Search and Filter

Toggle Open/Closed
View as
Display per page
14521 total products found.
The History of Hydrogen Induced Stress Cracking (HISC) Failures Due to Cathodic Charging of Duplex Stainless Steels (DSS)
Available for download

The History Of Hydrogen Induced Stress Cracking (HISC) Failures Of Duplex & Super Duplex Stainless Steels (DSS/ SDSS) Due To Cathodic Charging And The Potential For Improvement In HISC Resistance

Product Number: 51322-18070-SG
Author: Glenn Byrne, G. Warburton, R Francis
Publication Date: 2022
$20.00

As long ago as 1973, design codes1 considered the possibility of hydrogen embrittlement due to CP. Between 1986 and 19952-4 the failure of DSS fasteners subjected to CP were reported. These were associated with high ferrite levels in the steel (approximately 70%) combined with precipitation hardening at 475°C to give the high levels of strength desired for fastener applications.  At the same time, the susceptibility of DSS welds to hydrogen embrittlement had been reported5. Just like the fastener failures, the hydrogen cracking of welds was associated with high ferrite levels (70%), highly restrained joints and in the case of welds, high levels of diffusible hydrogen. 
Picture for Next Step To Advanced Data Analysis With Pulsed Eddy Currents
Available for download

Next Step To Advanced Data Analysis With Pulsed Eddy Currents

Product Number: 51322-17568-SG
Author: Donald Picard, Olivier Bellavance, Gabriel Cyr, Andréanne Potvin
Publication Date: 2022
$20.00

Pulsed Eddy Current (PEC) technology is a widely accepted inspection method now covered by several industry standards such as ISO(1) 20669, API(2) RP 583, and the new ASME(3) Section V (BPVC for Boiler and Pressure Vessel Code), article 21. PEC is a versatile inspection technology which provides an average remaining wall thickness through insulation and coatings. The technique can also be used to safely assess the minimum remaining ligament under corrosion scabs or blisters without surface preparation. PEC is resilient to liftoff variations and provides volumetric measurements of remaining material. It is capable of both detecting and assessing general corrosion on the outer surface of the pipes such as scabs and blisters, and detecting erosion or Flow Accelerated Corrosion (FAC) on the inner surface.
Advances in Green Cementitious Coatings
Available for download

Advances in Green Cementitious Coatings

Product Number: 51218-142-SG
Author: Rex Revard
Publication Date: 2018
$20.00

The demands of cementitious coatings and repair mortars have never been greater. As manufacturers, contractors, and coatings inspectors we are tasked with providing high performance solutions for new projects, or to breathe life back into failing concrete or steel. With new cement technologies, we can meet and exceed our customers’ environmental and financial expectations. 
Picture for Ductile Iron Wastewater Force Main Failure Analysis And Service Life Estimation
Available for download

Ductile Iron Wastewater Force Main Failure Analysis And Service Life Estimation

Product Number: 51321-16976-SG
Author: Stanley C. Agbakansi; Scott Lehman; Farzaneh Nosouhian; Christopher L. Alexander
Publication Date: 2021
$20.00
Picture for Industrial Water Treatment New Trends, Challenges, and Solutions
Available for download

Industrial Water Treatment New Trends, Challenges, and Solutions

Product Number: 37628-pdf
ISBN: 978-1-57590-457-3
Author: Edited by Zahid Amjad and Tao Chen
$135.00

This book covers the scientific and technological perspectives of industrial water treatment. The book’s 27 chapters are divided into three sections.

Section A (Chapters 1 through 12) deals with the formation and inhibition of scale-forming salts—including calcium carbonate, calcium sulfate dihydrate, calcium oxalate, silica, and calcium phosphate—as well as the removal of impurities and the dispersion and stabilization of suspended matter in cooling and desalination systems.

Section B consists of four chapters and focuses on the fundamentals of corrosion and its control in industrial water systems.

Section C comprises 11 chapters (Chapters 17 through 27) and deals with scale formation, inhibition, challenges, and limitation in the oil and gas industry. The discussions cover conventional scale to exotic scale (e.g., iron sulfide) from conventional and unconventional resources, such as scaling in shale gas field. 

This book is intended primarily for scientists, researchers, technologists, and engineers working in the water treatment and water purification industries around the globe. Researchers in other industries—such as pharmaceutical, medical, and food—who are involved in the use of high-purity water, as well as those in academia, will also find useful information here.
Picture for Finite Element Analysis to Locate Maximum Values of the First and Second Principal Strains in the Tensile Pull-Off Test for Coating Adhesion on Large Pipes
Available for download

Finite Element Analysis to Locate Maximum Values of the First and Second Principal Strains in the Tensile Pull-Off Test for Coating Adhesion on Large Pipes

Product Number: 41214-814-SG
Author: S. G. Croll, C. Siripirom, B. D. Keil
Publication Date: 2014
$20.00

The tensile pull-off test, as in ASTM 4541, in which a round metal ‘dolly’ is glued to a coating then pulled off is a very common method for measuring adhesion of a coating to its substrate. This technique is very well known to produce joint failures that are not at the intended coating steel interface but may initiate within the coating, within the glue or at the glue-coating interface. 
Picture for 98720 UNUSUAL REFINERY BOILER TUBE FAILURES DUE
Available for download

98720 UNUSUAL REFINERY BOILER TUBE FAILURES DUE TO CORROSION BY SULFURIC ACID INDUCED BY STEAM LEAKS

Product Number: 51300-98720-SG
ISBN: 98720 1998 CP
Author: D. Lopez-Lopez, A. Wong-Moreno
$20.00
Picture for NACE SP0516-2016
Available for download

SP0516-2016, “Guidelines for Data Collection and Analysis of Railroad Tank Car Interior Coating/Lining Condition”

Product Number: 21408-SG
Publication Date: 2016
$179.00

HISTORICAL DOCUMENT. Guidelines for inspecting, rating & documenting the condition of interior coatings and linings in tank cars. Complying with regulations. Examples, forms and a tank car map. May apply to other containers.       

 
Statistical Analysis Of U.S. Reportable Onshore Hazardous Liquid And Natural Gas Pipeline Accidents/Incidents From January 2010 To January 2021 Caused By External Corrosion Page 2
Available for download

Statistical Analysis Of U.S. Reportable Onshore Hazardous Liquid And Natural Gas Pipeline Accidents/Incidents From January 2010 To January 2021 Caused By External Corrosion Page 2

Product Number: 51322-18525-SG
Author: Alvaro A. Rodriguez
Publication Date: 2022
$20.00

In this paper, several cases will be showcased to highlight the contributing causes and underlying mechanisms of corrosion damage of components that resulted in significant releases of hazardous substances onto operator’s property, rights-of-way, and the environment. The objectives of this paper are to understand the causes of the failures and their consequences, to identify the risk factors involved, to discuss mitigative measures after failure, and to observe trends that may indicate the need for additional preventative and mitigative actions. The over-riding goal is to provide details in areas for potential improvement in pipeline operations to reduce risk and improve integrity management.
Picture for EFFECT OF MODELING VARIABLES UPON PROJECTION OF CORROSION INDUCED POST-TENSION TENDON FAILURES
Available for download

EFFECT OF MODELING VARIABLES UPON PROJECTION OF CORROSION INDUCED POST-TENSION TENDON FAILURES

Product Number: 51318-10496-SG
Author: William H. Hartt
Publication Date: 2018
$20.00

The present paper reports results of analyses that address the influence of physical and modeling variables upon failure projections.
Picture for 09022 How Not to Perform a Failure Analysis
Available for download

09022 How Not to Perform a Failure Analysis

Product Number: 51300-09022-SG
ISBN: 09022 2009 CP
Author: Mark S. Schilling and Randy Nixon
Publication Date: 2009
$20.00

This paper discusses a classic example where the facts surrounding the failure of a lining system were ignored and undue reliance was placed on laboratory analysis. This “blind faith” in analytical data without a sound causal theory caused the failure analysts to disregard or overlook the obvious.
Understanding Concrete Crack Repair: Simplifying the Complex Matrix of Solutions
Available for download

Understanding Concrete Crack Repair: Simplifying the Complex Matrix of Solutions

Product Number: 51217-031-SG
Author: Warren Brand
Publication Date: 2017
$20.00

Understanding when and how to repair, or not repair, cracks in concrete is of fundamental importance to all corrosion mitigation and coating professionals.

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support