Menu
Search
Filters
Close
Menu

Search and Filter

Toggle Open/Closed
View as
Display per page
14122 total products found.
Picture for Corrosion Of Gathering Pipelines In Oil And Gas Field And Its Mitigation Measures In China
Available for download

Corrosion Of Gathering Pipelines In Oil And Gas Field And Its Mitigation Measures In China

Product Number: 51322-17741-SG
Author: Anqing Fu, Juntao Yuan, Zihan Chen, Xuanpeng Li, Naixin Lv, Wensheng Li, Lei Fan, Houbu Li
Publication Date: 2022
$20.00

The exploration and development of oil and gas resources towards the direction of ultra-deep, low permeability, and unconventional in China. In addition, some oil and gas fields have developed into the middle or late stage, the application of various EOR technologies, such as acid fracturing, CO2 flooding, air foam flooding and polymer flooding, resulting in the service environment of oil and gas gathering pipelines becoming more and more complex and harsh, such as high temperature, high pressure, high H2S/CO2, Cl- and bacteria, corrosion failures became one of the biggest challenges of oil and gas gathering pipelines.
Picture for Augmentation Of Iron Carbonate Corrosion Products Using Amino Acids In CO2 Corrosion Environments
Available for download

Augmentation Of Iron Carbonate Corrosion Products Using Amino Acids In CO2 Corrosion Environments

Product Number: 51322-17754-SG
Author: Dilshad Shaikhah, Wassim Taleb, Bruce Cowe, Maalek Mohamed-Said, Anne Neville, Richard Barker
Publication Date: 2022
$20.00

Oil and gas production in a CO2 saturated environment is known to lead to corrosion due to dissolved carbonic acid. However, when the conditions are favorable, a protective FeCO3 layer can also form which reduces the material degradation of the underlying steel by up to ten or a hundred times.1 The formation of FeCO3 is possible via the reaction shown in equation 1.
Picture for ASSESSING THE IMPACT OF INSULATION CHOICE ON CORROSION IN A HIGH HUMIDITY DUAL TEMPERATURE ENVIRONMENT
Available for download

51318-10862-ASSESSING THE IMPACT OF INSULATION CHOICE ON CORROSION IN A HIGH HUMIDITY DUAL TEMPERATURE ENVIRONMENT

Product Number: 51318-10862-SG
Author: Dr. Mark Swift
Publication Date: 2018
$20.00

Details of a second procedure developed by the testing centre INNCOA to assess the performance of several insulation systems with respect to the ingress of water vapour through a damaged section of the covering layer.
Picture for Development of Corrosion Rate Monitoring Method of Steel in Concrete, - CIPE (Current Interrupted Polarizing Extrapolation Method) -
Available for download

51318-11393-Picture for Development of Corrosion Rate Monitoring Method of Steel in Concrete, - CIPE (Current Interrupted Polarizing Extrapolation Method) -

Product Number: 51318-11393-SG
Author: Satoru Yamamoto / Kenshiro Takeko / Satoshi Takaya
Publication Date: 2018
$20.00

The authors have developed the monitoring method “CIPE” which determines corrosion rate using Tafel slope extrapolation method. To confirm accuracy, the results of CIPE are compared with mass losses of steel bars corroded in concrete.
A Case Study On Microbiologically Influenced Corrosion In Oil Producing Well Flowlines
Available for download

A Case Study On Microbiologically Influenced Corrosion In Oil Producing Well Flowlines

Product Number: 51322-17924-SG
Author: Amer Jarragh, Sandip Kuthe, Sharad Londhe, Akhil Jaithlya, Abeer Rashed, Nadine El-Kaouri
Publication Date: 2022
$20.00

Oil field operating company’s (1) flowline network in North and West Kuwait (NWK) has over 3000 wells connected through 6” carbon steel pipelines flowing from wellhead to the nearest Gathering Center (GC). Untreated wet crude is transported through the flowlines to GC’s directly or passing through the Remote Headers and Manifold (RHM) to GCs. In RHM, mixing of the wet crude takes place before it is sent to GC’s via transfer lines for further separation.  The flowlines are laid aboveground except at road crossings where they are buried. 
Split Chamber Zero Resistance Ammetry Technique (SC-ZRA) for Detecting and Quantifying Microbially Influenced Corrosion in Oil and Gas Systems
Available for download

Split Chamber Zero Resistance Ammetry Technique (SC-ZRA) For Detecting And Quantifying Microbially Influenced Corrosion In Oil And Gas Systems

Product Number: 51322-18191-SG
Author: Anwar Sadek, Sai Prasanna Chinthala, Joshua Davis, Chelsea Monty-Bromer, John Senko
Publication Date: 2022
$20.00

Microbiologically influenced corrosion (MIC) is one of the most aggressive forms of corrosion leading to infrastructure and equipment damage in various industries, including but not limited to the oil and gas industry,1 water systems,2 medical devices,3 marine environments,4 nuclear waste storage facilities,5 and aviation fuel systems6 and storage.7 MIC received great attention because of the increasing cost associated with corrosion damage, particularly in oil and gas industry. The overall cost of corrosion has been estimated to be approximately 3.4% in the global Gross National Product8 which equates to approximately $2.9 trillion in 2018.9 A conservative estimate shows that 20% of all corrosion in aqueous system is MIC,10 which accounts to billions of dollars in the US.  
Picture for 08174 Unusual Corrosion Failures of Stainless Steel in Low Chloride Waters
Available for download

08174 Unusual Corrosion Failures of Stainless Steel in Low Chloride Waters

Product Number: 51300-08174-SG
ISBN: 08174 2008 CP
Author: Troels Mathiesen and Jan Elkjaer Frantsen
Publication Date: 2008
$20.00

Rare corrosion failures of stainless steel are reviewed in the paper. The cases originate from low chloride waters like potable water or fresh water in the temperature range of 15-25°C. Under such conditions full resistance of austenitic stainless steel like AISI 316 is usually expected.
Picture for 96143 HIGH-TEMPERATURE CORROSION ISSUES
Available for download

96143 HIGH-TEMPERATURE CORROSION ISSUES IN ADVANCED GAS TURBINES SYSTEMS INTENDED FOR POWER GENERATION

Product Number: 51300-96143-SG
ISBN: 96143 1996 CP
Author: I. G. Wright, W. Y. Lee, B. A. Pint
$20.00
Picture for Effect of Temperature and Pressure on the Performance of Corrosion Resistant Alloy (CRA) Coatings in
Available for download

51318-10967-Effect of Temperature and Pressure on the Performance of Corrosion Resistant Alloy (CRA) Coatings in

Product Number: 51318-10967-SG
Author: Shiladitya Paul
Publication Date: 2018
$20.00

Thermally sprayed CRA coatings can provide a cost-effective corrosion mitigation method for infrastructure in wet supercritical CO2 at 40°C and 80°C. The scales formed on the steel protected it from further corrosion in 10 MPa and 50 MPa CO2.
Picture for On-line Real Time Electrochemical Corrosion Monitoring in Low Conductive Fluids – Sulfolane Aromatic Extraction
Available for download

51318-11065-On-line Real Time Electrochemical Corrosion Monitoring in Low Conductive Fluids – Sulfolane Aromatic Extraction

Product Number: 51318-11065-SG
Author: Slawomir Kus / Sridhar Srinivasan / Kwei Meng Yap / Hui Li / Violetta Kozik / Andrzej Bak / Paulina Dybal
Publication Date: 2018
$20.00

Results from studies on corrosion measurement in low conductive, sulfolane-based solutions are presented in this paper. Sulfolane is commonly used in petrochemical processes for extraction of aromatic compounds including benzene, toluene or xylenes.
Picture for 03544 MICROSCOPIC DIFFERENTIATION OF INTERNAL
Available for download

03544 MICROSCOPIC DIFFERENTIATION OF INTERNAL CORROSION INITIATION MECHANISMS IN NATURAL GAS PIPELINE SYSTEMS

Product Number: 51300-03544-SG
ISBN: 03544 2003 CP
Author: Richard B. Eckert, Henry C. Aldrich, Chris A. Edwards, Bruce A. Cookingham
Publication Date: 2003
$20.00

An analytical approach that can discriminate between various forms of microscopic corrosion initiation has been employed in natural gas gathering and storage facilities.  Information provided by the analysis of electron microscope coupons has led toward the better understanding and diagnosis of the initial stages of internal corrosion in natural gas gathering and storage facilities.
Picture for A Recent Case Of Intermetallic Precipitations In Super Duplex
Available for download

A Recent Case Of Intermetallic Precipitations In Super Duplex

Product Number: 51322-17627-SG
Author: Henrik Bang, Jakob Mølholm, Kirsten Grønning Sørensen
Publication Date: 2022
$20.00

Production of oil and gas is well known to cause potential corrosion issues due to the CO2 content in the well stream. Carbon steel is widely used for production facilities as e.g. flowlines and manifolds, however, aging of the reservoir increases the number of corrosive agents, such as e.g. CO2, which are known to cause high corrosion rates in carbon steel. Therefore, carbon steel piping is often being replaced with super duplex stainless steel due to its high strength, excellent toughness and good corrosion resistance. Replacing carbon steel with super duplex has been conducted on several mature offshore oilfields in the European North Sea region.

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support