Menu
Search
Filters
Close
Menu

Search and Filter

Toggle Open/Closed
View as
Display per page
3127 total products found.
Picture for AMPP SP21518-2022, Recovery and Repassivation after Low pH Excursions in Open Recirculating Cooling Water Systems
Available for download

AMPP SP21518-2022, Recovery and Repassivation after Low pH Excursions in Open Recirculating Cooling Water Systems

Product Number: AMPP SP21518-2022
Publication Date: 2022
$109.00

This standard practice presents guidelines for preplanning for, recovering from, and repassivation after a low pH excursion in open recirculating water systems, no matter what the cause. The procedures presented in this standard inno way preclude the use of other procedures but are presented as best practices developed over years of experienceinavarietyofplants.Theprovisionsofthisstandardshouldbeappliedunderthedirectionofqualifiedwater-treatmentpersonnelfromwater-treatmentsuppliersand/orconsultants andplantpersonnel.
Picture for AMPP TR21544-2022, Corrosion and Mitigation Techniques for Fire Protection Piping Systems
Available for download

AMPP TR21544-2022, Corrosion and Mitigation Techniques for Fire Protection Piping Systems

Product Number: AMPP TR21544-2022
Publication Date: 2022
$109.00

This report explains different types of corrosion phenomena and contributing factors of corrosion that can occur in fire protection systems (FPS), such as water corrosivity, MIC, trapped air (wet systems), residual water (dry systems), and pipe weld corrosion. The basis for selection of corrosion mitigation strategies for corrosion mitigation and management of FPS are also discussed.

Corrosion that results in pipe leakage or obstruction is the most significant issue for owners of water-based FPS or fire sprinkler systems, in terms of both cost and system reliability. Corrosion damage/products and mineral deposits can impair the effectiveness of sprinkler systems, leaving facilities vulnerable to uncontrolled fire loss even though they are equipped with fire protection systems. This report describes practices that have been successful in mitigating FPS corrosion.
Picture for AMPP SP21460-2022, Corrosion Control of Pilings in Non-marine Applications
Available for download

AMPP SP21460-2022, Corrosion Control of Pilings in Non-marine Applications

Product Number: AMPP SP21460-2022
Publication Date: 2022
$109.00

This document discusses the issues to be taken into consideration with respect to accounting for corrosion on steel piles in non-marine applications. The rate of corrosion, design life and methods of corrosion control are discussed in a manner to provide the reader with guidance as to how to proceed with determining these factors. This standard is applicable to pipe piles, sheet piles, H piles, and other steel piles.
Picture for AMPP SP21548-2022, Pressurized Water Cleaning of Concrete and Cememtitious Materials - Thorough Cleaning
Available for download

AMPP SP21548-2022, Pressurized Water Cleaning of Concrete and Cememtitious Materials - Thorough Cleaning

Product Number: AMPP SP21548-2022
Publication Date: 2022
$109.00

This standard is intended for use by coating or lining specifiers, applicators, inspectors, or others who require the use of pressurized water cleaning technology to achieve a defined level of visual cleanliness of concrete surfaces. This standard contains requirements for Thorough Cleaning. Requirements for Light Cleaning are addressed in a separate standard. 

Picture for ANSI/NACE MR0175-2021/ISO 15156-3:2020 Technical Circular 1
Available for download

ANSI/NACE MR0175-2021/ISO 15156-3:2020 Technical Circular 1 (for Part 3)

Product Number: 15156-3-2020
Publication Date: 2021
$25.00

Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production —

Part 3:
Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys

TECHNICAL CIRCULAR 1

Published 2021-12-09
Picture for 11112 Difficulties inthe Use of NACE MR0175/ISO 15156
Available for download

11112 Difficulties inthe Use of NACE MR0175/ISO 15156

Product Number: 51300-11112-SG
ISBN: 11112 2011 CP
Author: Jeff Vatne and Regina Verdolin
Publication Date: 2011
$20.00

This paper will discuss some of the reasons why some Owner/Operators are choosing to invoke NACE MR0175-20021 instead of NACE MR0175/ISO 15156. Examples of exceptions taken will be examined. And cost issues involved in meeting MR0175/ISO 15156 will be presented.
Picture for NACE No. 6/SSPC 13 Surface Preparation of Concrete
Available for download

NACE No. 6/SSPC-SP 13-2018, Surface Preparation of Concrete

Product Number: 21082-SG
ISBN: 1-57590-045-9
Publication Date: 2018
$109.00

Revised in 2018! This NACE International/SSPC joint standard practice covers the preparation of concrete surfaces before the application of protective coating or lining systems. The standard includes two updated tables, Table 1 details classes of surface preparation, and Table 2 provides minimum acceptance criteria for concrete surfaces before coatings are applied and relevant test methods. The updated Appendix (nonmandatory) includes two additional tables, Table A1 provides typical surface properties of finished concrete, and Table A2 provides an extensive list of surface preparation methods for concrete surfaces. This standard should be used by specifiers, applicators, inspectors, and others who are responsible for defining a standard degree of cleanliness, strength, profile, and dryness of prepared concrete surfaces.
Picture for SP0113-2013
Available for download

NACE SP0113-2013, "Pipeline Integrity Method Selection"

Product Number: 21171-SG
Publication Date: 2013
$179.00

HISTORICAL DOCUMENT. Determining the appropriate assessment method for corrosion threats, as a part of a pipeline integrity process.  Specifically intended for buried onshore pipelines constructed from ferrous materials.
Picture for Design, Fabrication, and Inspection of Tanks for the Storage of Petroleum Refining Alkylation Unit Spent Sulfuric Acid at Ambient Temperatures
Available for download

NACE SP0205-2021, Design, Fabrication, and Inspection of Tanks for the Storage of Petroleum Refining Alkylation Unit Spent Sulfuric Acid at Ambient Temperatures

Product Number: NACE SP0205-2021
Publication Date: 2021
$109.00

Sulfuric acid (H2SO4) is the largest volume commodity chemical in use today.It plays some part in the production ofnearly all manufactured goods. One large use of concentrated sulfuric acid is used as a catalyst for refinery alkylationunits.Intheseunits,C3-C5olefinssuchaspropyleneorbutylenearereactedwithisobutanetoformgasoline-blendingcomponents such as isoheptane and isooctane.These gasoline-blending components are used to boost octane forautomobileandaviationfuels.

 

Most refineries have an alkylation unit that uses either hydrofluoric acid (HF) or sulfuric acid as the alkylation catalyst.Thisstandarddealswithspentsulfuricacidassociatedwiththesulfuricacidalkylationprocessonly.

Picture for NACE 6H189-1989, A State-of-the Art Report of Protective Coatings for Carbon Steel and Austenitic Stainless Steel Surfaces Under Thermal Insulation and Cementitious Fireproofing
Available for download

NACE 6H189-1989, A State-of-the Art Report of Protective Coatings for Carbon Steel and Austenitic Stainless Steel Surfaces Under Thermal Insulation and Cementitious Fireproofing

Product Number: NACE 6H189-1989
Publication Date: 1989
$179.00

HISTORICAL DOCUMENT. Reprinted March 1996.

This NACE technical committee report provides currently accepted practices for the design of insulated surfaces and the selection of protective coatings for carbon steel and austenitic stainless steel surfaces under thermal insulation and cementitious fireproofing. It is directed primarily toward the process industry, which has experienced the largest number of severe corrosion problems of vital parts and equipment, often leading to costly repairs or replacement.
Picture for SSPC-PA 15-2022, Material and Preparation Requirements for Steel Test Panels Used to Evaluate the Performance of Industrial Coatings
Available for download

SSPC-PA 15-2022, Material and Preparation Requirements for Steel Test Panels Used to Evaluate the Performance of Industrial Coatings

Product Number: SSPC-PA 15-2022
Publication Date: 2022
$109.00

This standard contains requirements for steel panels used to perform tests for evaluation of various performance characteristics of protective coatings applied to steel substrates. Panels meeting requirements of this standard may be used for tests including, but not limited to, natural and accelerated exposure in or out of the laboratory; tests to determine resistance to various chemicals, impact, and abrasion; and tests to characterize properties such as color, gloss, adhesion, and hardness. Requirements for steel composition, panel dimensions, surface preparation, ambient conditions for application and cure of coatings, and location and dimensions of scribes on coated panels are included.
Picture for NACE SP0495-2023
Available for download

NACE SP0495-2023, Qualifying Personnel as Abrasive Blasters and Coating and Lining Applicators in the Rail Industry

Product Number: NACE SP0495-2023
Publication Date: 2023
$109.00

This AMPP standard practice provides guidelines for qualifying personnel as abrasive blasters and coating and lining applicators in the rail industry. The intent of this standard is to foster personal growth of the individuals and technical continuity in the areas of surface preparation and coating and lining of railcar equipment. This standard outlines a formal system of training and qualification that recognizes the knowledge, skill, and technical competency of the individuals engaged in this work.

This standard is intended for use by employers, managers, and others in the rail industry who have a need for such guidelines in their efforts to provide suitable training and qualification of their abrasive blasters and coating and lining applicators to comply with regulations, meet customer requirements, and enhance the effectiveness of their operations.

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support