Menu
Search
Filters
Close
Menu

Use code FLASH20 at checkout for 20% off all eBooks and eCourses

Search and Filter

Toggle Open/Closed
View as
Display per page
3347 total products found.
Picture for 10309 Validation of the Constant Extension Rate Test for High Strength OCTG Steels
Available for download

10309 Validation of the Constant Extension Rate Test for High Strength OCTG Steels as a Ranking Tool for SSC Resistance

Product Number: 51300-10309-SG
ISBN: 10309 2010 CP
Author: Michaela Hoerstemeier, Christoph Bosch, Laurent Delattre and Bertine Orlans-Joliet
Publication Date: 2010
$20.00
Picture for Testing of Large-Diameter Pipe Material for Resistance to SOHIC in the New Twist and Bend Test
Available for download

Testing of Large-Diameter Pipe Material for Resistance to SOHIC in the New Twist and Bend Test

Product Number: 51319-12972-SG
Author: Thomas Haase
Publication Date: 2019
$20.00

Stress Oriented Hydrogen Induced Cracking (SOHIC) is recognized as an individual cracking mechanism in NACE MR0175/ISO 15156-2. SOHIC occurrence is rare and the mechanism not fully understood but thought to be restricted to carbon and low-alloy steels with low strength and low hardness. Several SOHIC resistance test methods have been reported but none of the test methods is currently standardized. The newly developed “twist and bend” test is currently under standardization in NACE TG 536.Within this work SOHIC resistance tests using the “twist and bend” test method were performed on SAWL large-diameter pipes of grades X52 and X65. All relevant sampling positions (base material heat-affected zone longitudinal weld) were investigated and the results were compared to standard four-point bend SSC tests without additional twist. A new test geometry using reduced specimen dimensions that allows testing of smaller specimens for weld regions has also been developed.The SOHIC performance is discussed based on grade microstructure and hardness of the investigated pipe materials. The investigated SAWL large-diameter pipes revealed excellent SOHIC resistance.
Picture for 01415 PROOF TESTING FURAN EQUIPMENT WHILE SAVING
Available for download

01415 PROOF TESTING FURAN EQUIPMENT WHILE SAVING MONEY

Product Number: 51300-01415-SG
ISBN: 01415 2001 CP
Author: Joseph J. Gates, Dr. Hira S. Ahluwalia, Norman J. Hirschey
$20.00
Picture for 04137 Safe Use of Al-Bronze Components in 22Cr
Available for download

04137 Safe Use of Al-Bronze Components in 22Cr Duplex Stainless Steel Equipment

Product Number: 51300-04137-SG
ISBN: 04137 2004 CP
Author: Torfinn Havn, Aker Kvaerner; Tor Hemmingsen, Stavanger College
$20.00
Picture for 05143 Life Extension of Degraded Mail Oil Line
Available for download

05143 Life Extension of Degraded Mail Oil Line Pipeline Sections through Improved Risk Based Integrity Management

Product Number: 51300-05143-SG
ISBN: 05143 2005 CP
Author: Michiel Jansen and Gerard van der Schot, Petroleum Development Oman
$20.00
Picture for Effect of Plastic Strain on Hydrogen Absorption of Low Alloy Carbon Steel for Linepipe
Available for download

Effect of Plastic Strain on Hydrogen Absorption of Low Alloy Carbon Steel for Linepipe

Product Number: 51323-19139-SG
Author: Taishi Fujishiro, Yusaku Tomio, Taro Muraki, Takuya Hara
Publication Date: 2023
$20.00

In the oil and gas industry, oil country tubular goods and linepipes are exposed to the wet H2S environment (sour environment) in some cases. The presence of H2S promotes hydrogen entry into steel due to the catalytic action of H2S. The absorbed hydrogen enhanced by H2S affects hydrogen embrittlement.
Picture for Case Study: Integrated External Corrosion Management for A 12-Inch Crude Oil Pipeline
Available for download

Case Study: Integrated External Corrosion Management for A 12-Inch Crude Oil Pipeline

Product Number: 51323-18970-SG
Author: Keith Parker, Trey Johnston, Christophe Baeté, Michael Snow
Publication Date: 2023
$20.00

The Enbridge External Corrosion Prevention team (ECP) is developing an Integrated External Corrosion Management (IECM) process by which management of external corrosion control systems can be optimized while
maintaining asset integrity and safety. IECM is intended to provide a methodology by which operators can move from a traditional reactive approach to a state-of-the-art proactive strategy commensurate with industry expertise and technology. Here we discuss a case study intended to demonstrate and assess the outcomes of IECM. The subject is a 12-inch diameter crude oil pipeline located in North America. Results of the process reveal opportunities for improvement and efficiencies in operation and maintenance (O&M).
Picture for Sour Service Test Qualification of a New High-Strength Titanium Alloy
Available for download

Sour Service Test Qualification of a New High-Strength Titanium Alloy

Product Number: 51315-5794-SG
ISBN: 5794 2015 CP
Author: Ronald Schutz
Publication Date: 2015
$20.00
Picture for Substitution of Carbon Steels for Material SA-533 Type E for Lightweight Equipment
Available for download

Substitution of Carbon Steels for Material SA-533 Type E for Lightweight Equipment

Product Number: 51319-12919-SG
Author: Valery Ngomo
Publication Date: 2019
$20.00

For many years MnMoNi alloy steels (ASME SA-533 type B or type C class 2) have been used in the substitution of carbon steels for the manufacture of equipment when weight reduction is critical. Nevertheless the use of these low alloy steels for equipment in sour service remains limited as their weldability is considered challenging. This paper aims at introducing an optimized chemical analysis based on material ASME SA-533 type E class 2. Test results on base metal and welded coupons will be described especially with respect to NACE MR0175/ISO 15156-2. Corrosion tests in amine solution done on SA-533 type E class 2 and carbon steel ASME SA-516 Gradde 65 are also be provided that show the low alloy steel behaves at least as well as the reference carbon steel.
Picture for 10035 What's Right with "850 On", What's Wrong with "850 Polarized", & How We Can Improve Them Both
Available for download

10035 What's Right with "850 On", What's Wrong with "850 Polarized", & How We Can Improve Them Both

Product Number: 51300-10035-SG
ISBN: 10035 2010 CP
Author: Whitt L. Trimble
Publication Date: 2010
$20.00
Field Guide for Managing Iron Sulfide (Black Powder) within Pipelines or Processing Equipment

Field Guide for Managing Iron Sulfide (Black Powder) within Pipelines or Processing Equipment”

Product Number: 37642-POD
ISBN: 978-1-57590-383-5
Author: Daniel E. Powell, Robert H. Winters, Mark A. Mercer
$190.00

This is a print-on-demand (POD) book that will be produced just for you in 2-5 days after your order. It should arrive at your door in about one to two weeks. However, due to supply chain and logistic challenges currently affecting the industry, it may take longer. Allow three weeks for international orders.

The Field Guide for Managing Iron Sulfide (Black Powder) within Pipelines or Processing Equipment offers practical guidance for corrosion control and operations personnel in managing black powder within their pipeline systems or processing equipment.

This book was written for new corrosion control professionals and operations personnel, who are based at production facilities. It provides straightforward, practical guidance regarding what is “black powder,” and why it may be a concern, field tests to be conducted, follow-up laboratory test that could be ordered, and an approach for using maintenance pigging, coupled with chemical treatments, to remove accumulations of “black powder.” 

It begins with a discussion of what is black powder and identifies health and safety considerations associated with H2S and the presence of black powder, identifying why there may be a concern. 

The Field Guide presents field and laboratory tests typically used to identify the presence of iron sulfide, and then discusses maintenance pigging and/or chemical treatments for removing such particulates. Several case studies are also presented. 

2019 NACE, 6 x 9" trim size, color, perfect bound, 264 pages

 

Field Guide for Managing Black Powder White Paper

 

Download the free white paper summary of this title to see specific areas of focus and discussion

Picture for Systematic Approach toward Damage Mechanism Reviews and Mechanical Integrity Improvements for Ammonia Synthesis and Fertilizer Facilities
Available for download

Systematic Approach toward Damage Mechanism Reviews and Mechanical Integrity Improvements for Ammonia Synthesis and Fertilizer Facilities

Product Number: 51323-19349-SG
Author: Michael Nugent, Daniel J. Benac, Sean Berg
Publication Date: 2023
$20.00

The use of Damage Mechanisms (DM’s) has been successfully developed and applied in the Oil Refining
industry for over 20 years. A damage mechanism is a specific combination of mechanical, chemical,
physical, or other processes that result in equipment degradation (piping or equipment) during operation
(active or shut down). These have been defined for Oil Refining (API RP 5711). API RP 571 is
supplemented with some similar and some specific individual damage mechanism, by technical reports, recommended practices, publications, and bulletins from API, as well as from the National Association of
Corrosion Engineers (NACE - now known as the Association for Materials Protection and Performance
or AMPP), and the Welding Research Council (WRC).

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support