Menu
Search
Filters
Close
Menu

Search and Filter

Toggle Open/Closed
View as
Display per page
14730 total products found.
Picture for A Two-Stage Cathodic Protection System Combining ICCP Components with Long-Term Galvanic Anode Steel Reinforcement Protection
Available for download

A Two-Stage Cathodic Protection System Combining ICCP Components with Long-Term Galvanic Anode Steel Reinforcement Protection

Product Number: 51323-18868-SG
Author: David Whitmore, David Simpson, George Sergi
Publication Date: 2023
$20.00

There is no doubt that Impressed Current Cathodic Protection (ICCP) of steel reinforced concrete has, over the last decades, become a well-established technique for controlling reinforcement corrosion of structural elements. The expectation of long-life protection has, however, been somewhat reduced as some anode systems fail, monitoring equipment become antiquated, and lack of adequate maintenance makes the systems inoperable with the average service life of any ICCP system falling to 15-20 years.
Sustainable Coatings For Above Ground Storage Tanks
Available for download

Sustainable Coatings For Above Ground Storage Tanks

Product Number: 51322-18057-SG
Author: M. Gagné, J. Weber
Publication Date: 2022
$20.00

Controlling corrosion of steel is expensive. The direct costs of corrosion maintenance are estimated to be over 3% of GDP every year.1 Metallic zinc coatings provide very effective corrosion protection for steel by acting first as a barrier coating, keeping corrosive elements away from the steel, and secondly as a sacrificial anode.2 Should the zinc coating be compromised, accidentally by a scratch or on purpose with a drilled hole, the zinc will provide anodic protection to the exposed steel. Metallic zinc coatings can be pure zinc or zinc-based alloys and will be referred to generically as zinc coatings in the paper. Zinc coatings can be efficiently applied by thermal spraying, which involves projecting particles of semi-molten zinc onto the surface of the steel using compressed air. With thermal sprayed zinc (TSZ) coatings, there is no size limitation to the part to be coated, and the technology is fully portable, allowing easy field applications.
Picture for Water Treatment Dosage Control and Relationship to Performance
Available for download

Water Treatment Dosage Control and Relationship to Performance

Product Number: 51395-95260-SG
Author: J.E. Hoots
Publication Date: 1995
$20.00

New methods for monitoring scale and corrosion inhibiting water treatment programs have been developed. These new patented methods utilize the measurement of system consumption of actives in the treatment program by fluorescence analysis.'-' The applied dosage of treatment program and the amount of actives available to the system are measured with inert fluorescent tracers added to the treatments.

System consumption of actives is defined as the difference between the amount of actives added and remaining in the system. 2,5- 7 Consumption measurements determine changes in the whole operating system (not a simulated, small portion of the system). Consumption measurements can also be made on individual portions of the system (heat exchangers). Changes in consumption of inhibitors and dispersants can .be related to changes in system operating conditions and performance. Reducing consumption of actives or maintaining consumption within a specified range can be related to optimization of the operation of the cooling system and treatment program.
Picture for 96505 NEW PROCEDURES FOR TESTING AND
Available for download

96505 NEW PROCEDURES FOR TESTING AND CLASSIFICATION OF BALLAST TANK COATINGS

Product Number: 51300-96505-SG
ISBN: 96505 1996 CP
Author: Helge Vold, Arne Henrik Hansen, Odd Corneliusen
$20.00
NoP Commerce Standards image
Available for download

SSPC-QP 6-2010, Standard Procedure for Evaluating the Qualifications of Contractors Who Apply Thermal Spray (Metallizing) for Corrosion Protection of Steel and Concrete Structures

Product Number: SSPC-QP 6-2010
Publication Date: 2010
$109.00
Picture for Long-Term Monitoring Of Galvanic Anodes Provides Data To Predict Performance And Perform Intelligent Design Of Galvanic Corrosion Control Systems For Reinforced Concrete Structures
Available for download

Long-Term Monitoring Of Galvanic Anodes Provides Data To Predict Performance And Perform Intelligent Design Of Galvanic Corrosion Control Systems For Reinforced Concrete Structures

Product Number: 51321-16712-SG
$20.00
Picture for Material selection and recent case histories with nickel alloys
Available for download

51318-11600-Material selection and recent case histories with nickel alloys

Product Number: 51318-11600-SG
Author: Helena Alves
Publication Date: 2018
$20.00

The aim of this paper is to review the main aspects of the material selection for the chemical process industry (CPI) and present different examples to illustrate the material selection process.
Coating Failures on Painted Galvanized Mast Arms
Available for download

Coating Failures on Painted Galvanized Mast Arms

Product Number: 41208-402-SG
Author: Paul Vinik, Richard A. Burgess
Publication Date: 2008
$20.00

Galvanized mast arms support uncounted numbers of traffic signals and signage throughout the United States. The proportion of these that have a “duplex” coating system (both galvanizing and organic coatings) is unknown. However, the number is surely significant, and the number of coating system failures is also significant. 
Coal Tar Enamel Service Life Extension
Available for download

Coal Tar Enamel Service Life Extension

Product Number: 41215-931-SG
Author: Allen Skaja, Bobbi Jo Merten, David Tordonato
Publication Date: 2015
$20.00

Coal tar enamel provides an extremely long service life, under the right conditions. The Bureau of Reclamation (Reclamation) has observed more than 80 years of corrosion protection at facilities such as Hoover Dam. The coal tar enamel linings in penstocks and outlet works that are buried, encased, or in tunnels maintain excellent condition with minor damage. However, when temperature fluctuates between hot and cold, the enamel is stressed and develops alligator cracking. 
Managing Integrity and Corrosion Through Real-Time Prediction Modeling Approach – “Software Sensor” Concept
Available for download

Managing Integrity And Corrosion Through Real-Time Prediction Modeling Approach – “Software Sensor” Concept

Product Number: 51322-18126-SG
Author: Slawomir Kus, Kwei Meng Yap, Pierre Constantineau
Publication Date: 2022
$20.00

Safe and stable operation of the process plant through its life cycle is an ultimate target of any integrity management system. Over the last decades, a number of possible ways and systems for managing plant integrity were described and implemented.1-4 A common path for all those efforts was to control and manage corrosion processes in a more-or-less systematic way by applying certain measures (monitoring techniques, material selection guidelines, operating procedures etc.) and performance indicators (remaining time-to-failure, inhibitor usage etc.). An effective corrosion and integrity management system, in theory, should be capable to “uncover” excessive corrosion incidents before serious damage occurs. Unfortunately, unexpected corrosion-related failures are still occurring in the petroleum industry.5 This situation stems predominantly from relatively poor data organization and management, leaving corrosion and key process information spread and hidden across different refinery functions and systems.  
Picture for 09447 Microgalvanic Current Mapping of Magnesium / Aluminum Galvanic Couple by Scanning Vibrating El
Available for download

09447 Microgalvanic Current Mapping of Magnesium / Aluminum Galvanic Couple by Scanning Vibrating Electrode Technique (SVET)

Product Number: 51300-09447-SG
ISBN: 09447 2009 CP
Author: Yar-Ming Wang, Surender Maddela and Anil K. Sachdev
Publication Date: 2009
$20.00
Picture for Coatings + Proceedings 2021-ALL Papers

(Pipeline, Oil & Gas) Creating and Applying a Single Coat Nano Non-Skid Deck Epoxy

Product Number: 32-COAT_DEC21
Author: Joe Davis
Publication Date: 2021
$20.00

The Offshore Oil and Gas environment is among the most corrosive in the world. It is also one of the most
dangerous. Providing safe working surfaces is a requirement of the Bureau of Safety and Environmental
Enforcement (BSEE) and is desired by asset owners and contractors alike. Balancing safety with production,
downtime, and turn-around times is always a battle, but one coating manufacturer seems to have solved
these issues through its development of a single coat zinc carbon nanotube (CNT) non-skid epoxy deck coat
that provides galvanic protection via the sacrificial metal’s electron transfer along the CNT quantum network.

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support