Menu
Search
Filters
Close
Menu

Save 20% on select titles with code HIDDEN24 - Shop The Sale Now

Search and Filter

Toggle Open/Closed
View as
Display per page
14501 total products found.
Picture for Creating Chemical Adhesion During Surface Preparation
Available for download

Creating Chemical Adhesion During Surface Preparation

Product Number: 51323-19535-SG
Author: Loren L. Hatle
Publication Date: 2023
$20.00

Historically the focus has been on the adverse anions (chlorides, sulfates nitrates) with little attention
Aggregated FeS and ionically bonded FeCl2 is a pervasive, difficult, and high-liability issue for pipeline,
petrochemical, power, shipping, and other industries. Situational variations (meteorological, geographical,
seasonal, etc.) can confound conventionally specified surface preparation attempts to achieve perfect or
near-perfect metal cleanliness, thus reducing expected coating life by 30 to 75 percent. Because
conventional surface preparation processes have historically been unable to adequately relieve
microcontamination of metal surfaces, organizations have settled for an uneasy balance between economic
and physical feasibilities that exclude the possibility of achieving ideal surface preparation outcomes and
rely more heavily upon barrier coatings to supply needed corrosion control.
High-Performance Concrete Floor Coatings
Available for download

High-Performance Concrete Floor Coatings

Product Number: 41207-383-SG
Author: Jeffrey T. Spillane
Publication Date: 2007
$20.00

This paper will explore High-Performance Concrete Floor Coatings. It will include the basic characteristics of concrete as a floor substrate. We will examine the importance of preliminary inspection and surface preparation. We will discuss the basic generic types of coatings available and the selection of the appropriate system. We will conclude with an overview of the proper application of the coatings.
Cost Effective Surface Preparation for Coating Performance, Corrosion Protection and Long Service Life
Available for download

Cost Effective Surface Preparation for Coating Performance, Corrosion Protection and Long Service Life

Product Number: 41207-376-SG
Author: Hugh J Roper
Publication Date: 2007
$20.00

This presentation will outline the results and conclusions of a number of years of testing and experience in surface preparation for high-performance coatings. Testing has shown that there are several important variables that are not routinely monitored and controlled on most coating projects. The pertinent variables will be identified, and guidance will be provided on appropriate treatment of the variables to achieve the maximum results from the chosen coating. 
Picture for NACE No. 4/SSPC-SP 7 (Spanish)
Available for download

NACE No. 4/SSPC-SP 7-2006-SG (Spanish), Limpieza Abrasiva Superficial

Product Number: 21180-SG
ISBN: 1-57590-102-1
Publication Date: 2006
$179.00

Describe el nivel de limpieza abrasiva que se llama "Superficial".  Metodos con aire comprimido ("limpieza con chorro de arena") . Uno de cinco niveles: Metal Blanco, Metal Casi Blanco, Comercial, Industrial, Superficial
The Long-Term Effects of Surface Preparation: Evaluating ISO 12944-9 In Offshore Coating Application With Waterjetting And Decontamination Chemical”
Available for download

The Long Term Effects Of Surface Preparation: Evaluating ISO 12944 In Offshore Coating Application With Waterjetting And Cleaning Additive

Product Number: 51322-18021-SG
Author: Jerry Woodson, Alex Petkas
Publication Date: 2022
$20.00

Offshore assets such as drilling rigs, production platforms, and wind turbines present challenges for corrosion prevention maintenance. The primary defense against atmospheric corrosion on structural steel in offshore saltwater environments is a protective coating system.

Several factors cause protective coatings to degrade rapidly: besides wearing and damage encountered in installation and use, ultraviolet light breaks down the organic resins and corrosive  seawater causes under creep at any breaks in the coating. Maintenance coating for offshore atmospheric systems can therefore be necessary as early as the second year.
Don't Forget the Details When Specifying a Concrete Coating Project
Available for download

Don't Forget the Details When Specifying a Concrete Coating Project

Product Number: 51219-217-SG
Author: Sean Meracle, John Sierzega
Publication Date: 2019
$20.00

Many times, concrete coating projects are approached similarly to those of other paintable substrates, like steel or wood. The primary and sometimes only, focus is to provide a visibly clean and sound surface. More experienced design professionals will ensure that voids are filled, protrusions are ground to plane, and the correct surface profile is achieved. Once prepared, a serviceable coating system is applied (always as per the manufacturer’s recommendations) and no one looks back… unless there is a failure.
Picture for SSPC-SP 10/NACE No. 2-2024, Near-White Metal Blast Cleaning
Available for download

SSPC-SP 10/NACE No. 2-2024, Near-White Metal Blast Cleaning

Product Number: SSPC-SP 10/NACE No. 2-2024
Publication Date: 2024
$109.00

This standard defines the process for preparing a carbon steel surface to the near-white metal degree of surface cleanliness using a dry abrasive blast method of cleaning. It is intended for use by coating or lining specifiers, applicators, inspectors, or others whose responsibility is to specify a standard degree of surface cleanliness for carbon steel surfaces to be achieved by dry abrasive blast cleaning. or to prepare or inspect carbon steel to conform to defined requirements.

The primary functions of blast cleaning before coating are

a)           to remove material from the surface that can cause early failure of the coating, and

b)           to obtain a suitable surface profile (roughness) to enhance the adhesion of the new coating system.

 

The six degrees of dry abrasive blast cleaning of carbon steel surfaces are:

 

Degree of Surface Cleanliness

Designation

White Metal Blast Cleaning

SSPC-SP5/NACE No. 1

Near-White Metal Blast Cleaning

SSPC-SP10/NACE No. 2

Commercial Blast Cleaning

SSPC-SP6/NACE No. 3

Industrial Blast Cleaning

SSPC-SP14/NACE No. 8

Brush-Off Blast Cleaning

SSPC-SP7/NACE No. 4

Thorough Spot and Sweep Blast Cleaning for Industrial Coating Maintenance

SSPC-SP18

 
COATING CONCRETE AFTER 28 DAYS . . Why There Is No Magic In This Number
Available for download

COATING CONCRETE AFTER 28 DAYS . . Why There Is No Magic In This Number

Product Number: 51218-134-SG
Author: Randy A. Nixon
Publication Date: 2018
$20.00

This paper will discuss the many factors affecting the timing for concrete shrinkage (and related cracking) as well as the rate of loss of excess moisture which are not reliant on 28 days of concrete cure time. In addition, case histories will be presented evidencing successful coating applications on concrete well before 28 days of cure time versus coating problems experienced well beyond 28 days of concrete cure.
Picture for Procedure for Determining Conformance to Concrete Surface Profile Requirements
Available for download

AMPP SP21513-2021, Procedure for Determining Conformance to Concrete Surface Profile Requirements

Product Number: AMPP SP21513-2021
Publication Date: 2021
$109.00

This standard describes a procedure suitable for laboratory and field use to determine conformance to specified surface profile on concrete substrates using Method 1: Depth micrometer as described in ASTM D8271, Method 2: Concrete Surface Profile (CSP) Chips (CSP 1-10) as described in ICRI Guideline No. 310.2R, or Method 3: Replica putty as described in ASTM D7682 (Method 3A-visual or Method 3B-quantitative).

Proper bonding of coatings and linings to concrete surfaces requires proper cleaning and frequently requires the concrete to be roughened to increase the surface area. The roughness, also known as surface profile, can be imparted into concrete by abrasive or water blast cleaning, acid etching or various impact/scarifying power tools. The resulting surface profile depth can influence coating/lining adhesion and performance. Coating/lining manufacturers and/or facility owners frequently specify cleaning and roughening of the concrete surface prior to product installation. 
Picture for SP0815-2015
Available for download

SSPC-SP 6 (WAB)/NACE WAB-3-2015, “Commercial Wet Abrasive Blast Cleaning”

Product Number: 21199-SG
ISBN: 1-57590-324-5
Publication Date: 2015
$109.00

This standard, SSPC-SP 6 (WAB)/NACE WAB-3,  defines  the "Commercial"  level of surface cleanliness for wet abrasive methods.  One of five wet abrasive (WAB) levels: (White Metal, Near-White Metal, Commercial, Industrial, Brush-Off)
Development of Materials and Process Metrics for High Performance Abrasive Blast Surface Preparation
Available for download

Development of Materials and Process Metrics for High Performance Abrasive Blast Surface Preparation

Product Number: 41216-977-SG
Author: Robert Kogler, Laura Erickson
Publication Date: 2016
$20.00

Protective coating systems provide the primary corrosion protection for assets in sea water. Protective coating systems are defined as a specific combination of surface preparation and coating material applied under specified conditions to a specific structure. Over the past many years, the paint industry has focused considerable resources toward the formulation, performance testing and fine tuning of coatings materials. 
Successful Surface Preparation of Hot-Dip Galvanized Iron & Steel and Hardware Surfaces for Painting
Available for download

Successful Surface Preparation of Hot-Dip Galvanized Iron & Steel and Hardware Surfaces for Painting

Product Number: 51218-121-SG
Author: Kevin Irving
Publication Date: 2018
$20.00

This paper will cover understanding the hot-dip galvanizing process and coating benefits, Identify the benefits of utilizing paint/powder coating with hot-dip galvanizing in a duplex system, Recognize the importance of communication and clear assignments of responsibility in the specification of successful duplex systems and differentiate between HDG surface conditions in order to properly prepare the zinc coating for paint/powder.

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support